Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c0d121720220584bba2876b032e58a076b843fa1
Commit:     c0d121720220584bba2876b032e58a076b843fa1
Parent:     28f96eeafc89643d411d54c258788a8573576127
Author:     Dave Jiang <[EMAIL PROTECTED]>
AuthorDate: Thu Jul 19 01:49:46 2007 -0700
Committer:  Linus Torvalds <[EMAIL PROTECTED]>
CommitDate: Thu Jul 19 10:04:53 2007 -0700

    drivers/edac: add new nmi rescan
    
    Provides a way for NMI reported errors on x86 to notify the EDAC
    subsystem pending ECC errors by writing to a software state variable.
    
    Here's the reworked patch. I added an EDAC stub to the kernel so we can
    have variables that are in the kernel even if EDAC is a module. I also
    implemented the idea of using the chip driver to select error detection
    mode via module parameter and eliminate the kernel compile option.
    Please review/test. Thx!
    
    Also, I only made changes to some of the chipset drivers since I am
    unfamiliar with the other ones. We can add similar changes as we go.
    
    Signed-off-by: Dave Jiang <[EMAIL PROTECTED]>
    Signed-off-by: Douglas Thompson <[EMAIL PROTECTED]>
    Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
    Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
---
 arch/i386/kernel/traps.c   |   12 ++++++++++++
 arch/x86_64/kernel/traps.c |   11 +++++++++++
 drivers/edac/Kconfig       |   11 -----------
 drivers/edac/Makefile      |    2 +-
 drivers/edac/e752x_edac.c  |   14 +++++++++++++-
 drivers/edac/e7xxx_edac.c  |   14 ++++++++++++++
 drivers/edac/edac_mc.c     |    3 +++
 drivers/edac/edac_module.c |   24 ++++++++++++++++++++++--
 drivers/edac/edac_stub.c   |   42 ++++++++++++++++++++++++++++++++++++++++++
 drivers/edac/i5000_edac.c  |   13 +++++++++++++
 include/linux/edac.h       |   29 +++++++++++++++++++++++++++++
 11 files changed, 160 insertions(+), 15 deletions(-)

diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 109ebbc..3e7753c 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -41,6 +41,10 @@
 #include <linux/mca.h>
 #endif
 
+#if defined(CONFIG_EDAC)
+#include <linux/edac.h>
+#endif
+
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -638,6 +642,14 @@ mem_parity_error(unsigned char reason, struct pt_regs * 
regs)
        printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on "
                "CPU %d.\n", reason, smp_processor_id());
        printk(KERN_EMERG "You have some hardware problem, likely on the PCI 
bus.\n");
+
+#if defined(CONFIG_EDAC)
+       if(edac_handler_set()) {
+               edac_atomic_assert_error();
+               return;
+       }
+#endif
+
        if (panic_on_unrecovered_nmi)
                 panic("NMI: Not continuing");
 
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 74cbeb2..8713ad4 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -34,6 +34,10 @@
 #include <linux/bug.h>
 #include <linux/kdebug.h>
 
+#if defined(CONFIG_EDAC)
+#include <linux/edac.h>
+#endif
+
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/atomic.h>
@@ -719,6 +723,13 @@ mem_parity_error(unsigned char reason, struct pt_regs * 
regs)
                reason);
        printk(KERN_EMERG "You have some hardware problem, likely on the PCI 
bus.\n");
 
+#if defined(CONFIG_EDAC)
+       if(edac_handler_set()) {
+               edac_atomic_assert_error();
+               return;
+       }
+#endif
+
        if (panic_on_unrecovered_nmi)
                panic("NMI: Not continuing");
 
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e8c4a2b..3cfd906 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -109,15 +109,4 @@ config EDAC_I5000
          Support for error detection and correction the Intel
          Greekcreek/Blackford chipsets.
 
-choice
-       prompt "Error detecting method"
-       default EDAC_POLL
-
-config EDAC_POLL
-       bool "Poll for errors"
-       help
-         Poll the chipset periodically to detect errors.
-
-endchoice
-
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 773472c..19d5ac7 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -5,9 +5,9 @@
 # This file may be distributed under the terms of the
 # GNU General Public License.
 #
-# $Id: Makefile,v 1.4.2.3 2005/07/08 22:05:38 dsp_llnl Exp $
 
 
+obj-$(CONFIG_EDAC)                     := edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)             += edac_core.o
 
 edac_core-objs := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 8bcc887..f51e79a 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -22,6 +22,7 @@
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/slab.h>
+#include <linux/edac.h>
 #include "edac_mc.h"
 
 #define E752X_REVISION " Ver: 2.0.1 " __DATE__
@@ -948,6 +949,16 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
        debugf0("%s(): mci\n", __func__);
        debugf0("Starting Probe1\n");
 
+       /* make sure error reporting method is sane */
+       switch(edac_op_state) {
+               case EDAC_OPSTATE_POLL:
+               case EDAC_OPSTATE_NMI:
+                       break;
+               default:
+                       edac_op_state = EDAC_OPSTATE_POLL;
+                       break;
+       }
+
        /* check to see if device 0 function 1 is enabled; if it isn't, we
         * assume the BIOS has reserved it for a reason and is expecting
         * exclusive access, we take care not to violate that assumption and
@@ -1123,4 +1134,5 @@ MODULE_DESCRIPTION("MC support for Intel e752x memory 
controllers");
 module_param(force_function_unhide, int, 0444);
 MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
 " 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
-
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c
index 310d91b..0827b9a 100644
--- a/drivers/edac/e7xxx_edac.c
+++ b/drivers/edac/e7xxx_edac.c
@@ -27,6 +27,7 @@
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/slab.h>
+#include <linux/edac.h>
 #include "edac_mc.h"
 
 #define        E7XXX_REVISION " Ver: 2.0.1 " __DATE__
@@ -419,6 +420,17 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
        struct e7xxx_error_info discard;
 
        debugf0("%s(): mci\n", __func__);
+
+       /* make sure error reporting method is sane */
+       switch(edac_op_state) {
+               case EDAC_OPSTATE_POLL:
+               case EDAC_OPSTATE_NMI:
+                       break;
+               default:
+                       edac_op_state = EDAC_OPSTATE_POLL;
+                       break;
+       }
+
        pci_read_config_dword(pdev, E7XXX_DRC, &drc);
 
        drc_chan = dual_channel_active(drc, dev_idx);
@@ -565,3 +577,5 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n"
        "Based on.work by Dan Hollis et al");
 MODULE_DESCRIPTION("MC support for Intel e7xxx memory controllers");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index eae1ca1..81a28d6 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/sysdev.h>
 #include <linux/ctype.h>
+#include <linux/edac.h>
 #include <asm/uaccess.h>
 #include <asm/page.h>
 #include <asm/edac.h>
@@ -241,6 +242,7 @@ static int add_mc_to_global_list (struct mem_ctl_info *mci)
        }
 
        list_add_tail_rcu(&mci->link, insert_before);
+       atomic_inc(&edac_handlers);
        return 0;
 
 fail0:
@@ -267,6 +269,7 @@ static void complete_mc_list_del(struct rcu_head *head)
 
 static void del_mc_from_global_list(struct mem_ctl_info *mci)
 {
+       atomic_dec(&edac_handlers);
        list_del_rcu(&mci->link);
        init_completion(&mci->complete);
        call_rcu(&mci->rcu, complete_mc_list_del);
diff --git a/drivers/edac/edac_module.c b/drivers/edac/edac_module.c
index 3cd3a23..89c96ec 100644
--- a/drivers/edac/edac_module.c
+++ b/drivers/edac/edac_module.c
@@ -1,6 +1,7 @@
 
 #include <linux/freezer.h>
 #include <linux/kthread.h>
+#include <linux/edac.h>
 
 #include "edac_mc.h"
 #include "edac_module.h"
@@ -102,6 +103,25 @@ static void do_edac_check(void)
 }
 
 /*
+ * handler for EDAC to check if NMI type handler has asserted interrupt
+ */
+static int edac_assert_error_check_and_clear(void)
+{
+       int vreg;
+
+       if(edac_op_state == EDAC_OPSTATE_POLL)
+               return 1;
+
+       vreg = atomic_read(&edac_err_assert);
+       if(vreg) {
+               atomic_set(&edac_err_assert, 0);
+               return 1;
+       }
+
+       return 0;
+}
+
+/*
  * Action thread for EDAC to perform the POLL operations
  */
 static int edac_kernel_thread(void *arg)
@@ -109,8 +129,8 @@ static int edac_kernel_thread(void *arg)
        int msec;
 
        while (!kthread_should_stop()) {
-
-               do_edac_check();
+               if(edac_assert_error_check_and_clear())
+                       do_edac_check();
 
                /* goto sleep for the interval */
                msec = (HZ * edac_get_poll_msec()) / 1000;
diff --git a/drivers/edac/edac_stub.c b/drivers/edac/edac_stub.c
new file mode 100644
index 0000000..91a038d
--- /dev/null
+++ b/drivers/edac/edac_stub.c
@@ -0,0 +1,42 @@
+/*
+ * common EDAC components that must be in kernel
+ *
+ * Author: Dave Jiang <[EMAIL PROTECTED]>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#include <linux/module.h>
+#include <linux/edac.h>
+#include <asm/atomic.h>
+#include <asm/edac.h>
+
+int edac_op_state = EDAC_OPSTATE_INVAL;
+EXPORT_SYMBOL(edac_op_state);
+
+atomic_t edac_handlers = ATOMIC_INIT(0);
+EXPORT_SYMBOL(edac_handlers);
+
+atomic_t edac_err_assert = ATOMIC_INIT(0);
+EXPORT_SYMBOL(edac_err_assert);
+
+inline int edac_handler_set(void)
+{
+       if (edac_op_state == EDAC_OPSTATE_POLL)
+               return 0;
+
+       return atomic_read(&edac_handlers);
+}
+EXPORT_SYMBOL(edac_handler_set);
+
+/*
+ * handler for NMI type of interrupts to assert error
+ */
+inline void edac_atomic_assert_error(void)
+{
+       atomic_set(&edac_err_assert, 1);
+}
+EXPORT_SYMBOL(edac_atomic_assert_error);
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index 4d7e786..8eb8b6e 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -19,6 +19,7 @@
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/slab.h>
+#include <linux/edac.h>
 #include <asm/mmzone.h>
 
 #include "edac_mc.h"
@@ -1285,6 +1286,16 @@ static int i5000_probe1(struct pci_dev *pdev, int 
dev_idx)
        if (PCI_FUNC(pdev->devfn) != 0)
                return -ENODEV;
 
+       /* make sure error reporting method is sane */
+       switch(edac_op_state) {
+               case EDAC_OPSTATE_POLL:
+               case EDAC_OPSTATE_NMI:
+                       break;
+               default:
+                       edac_op_state = EDAC_OPSTATE_POLL;
+                       break;
+       }
+
        /* Ask the devices for the number of CSROWS and CHANNELS so
         * that we can calculate the memory resources, etc
         *
@@ -1475,3 +1486,5 @@ MODULE_AUTHOR
     ("Linux Networx (http://lnxi.com) Doug Thompson <[EMAIL PROTECTED]>");
 MODULE_DESCRIPTION("MC Driver for Intel I5000 memory controllers - "
                   I5000_REVISION);
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
diff --git a/include/linux/edac.h b/include/linux/edac.h
new file mode 100644
index 0000000..c8b92d7
--- /dev/null
+++ b/include/linux/edac.h
@@ -0,0 +1,29 @@
+/*
+ * Generic EDAC defs
+ *
+ * Author: Dave Jiang <[EMAIL PROTECTED]>
+ *
+ * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#ifndef _LINUX_EDAC_H_
+#define _LINUX_EDAC_H_
+
+#include <asm/atomic.h>
+
+#define EDAC_OPSTATE_INVAL     -1
+#define EDAC_OPSTATE_POLL      0
+#define EDAC_OPSTATE_NMI       1
+#define EDAC_OPSTATE_INT       2
+
+extern int edac_op_state;
+extern atomic_t edac_handlers;
+extern atomic_t edac_err_assert;
+
+extern int edac_handler_set(void);
+extern void edac_atomic_assert_error(void);
+
+#endif
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to