Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c83c41e4e623aa6504d30c858a05eac771048029
Commit:     c83c41e4e623aa6504d30c858a05eac771048029
Parent:     bbf25010f1a6b761914430f5fca081ec8c7accd1
Author:     Krzysztof Helt <[EMAIL PROTECTED]>
AuthorDate: Thu Jul 19 08:00:17 2007 +0200
Committer:  Mark M. Hoffman <[EMAIL PROTECTED]>
CommitDate: Tue Oct 9 22:56:28 2007 -0400

    hwmon: adm1021 clean ups
    
    This patch provides some coding standard cleanups and general code 
improvements
    (more debug info, signed values for temperatures, changed names of ADM1023
    regs, removed read/write_value functions).
    
    Signed-off-by: Krzysztof Helt <[EMAIL PROTECTED]>
    Acked-by: Jean Delvare <[EMAIL PROTECTED]>
    Signed-off-by: Mark M. Hoffman <[EMAIL PROTECTED]>
---
 drivers/hwmon/adm1021.c |  226 +++++++++++++++++++++++++----------------------
 1 files changed, 122 insertions(+), 104 deletions(-)

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index c466329..5418a67 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -1,6 +1,6 @@
 /*
     adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
-             monitoring
+               monitoring
     Copyright (c) 1998, 1999  Frodo Looijaard <[EMAIL PROTECTED]> and
     Philip Edelbrock <[EMAIL PROTECTED]>
 
@@ -32,11 +32,12 @@
 /* Addresses to scan */
 static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
                                        0x29, 0x2a, 0x2b,
-                                       0x4c, 0x4d, 0x4e, 
+                                       0x4c, 0x4d, 0x4e,
                                        I2C_CLIENT_END };
 
 /* Insmod parameters */
-I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, 
gl523sm, mc1066);
+I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm,
+                       mc1066);
 
 /* adm1021 constants specified below */
 
@@ -45,20 +46,21 @@ I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, 
thmc10, lm84, gl523sm,
 #define ADM1021_REG_TEMP               0x00
 #define ADM1021_REG_REMOTE_TEMP                0x01
 #define ADM1021_REG_STATUS             0x02
-#define ADM1021_REG_MAN_ID             0x0FE   /* 0x41 = AMD, 0x49 = TI, 0x4D 
= Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
-#define ADM1021_REG_DEV_ID             0x0FF   /* ADM1021 = 0x0X, ADM1023 = 
0x3X */
-#define ADM1021_REG_DIE_CODE           0x0FF   /* MAX1617A */
+/* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */
+#define ADM1021_REG_MAN_ID             0xFE
+/* ADM1021 = 0x0X, ADM1023 = 0x3X */
+#define ADM1021_REG_DEV_ID             0xFF
 /* These use different addresses for reading/writing */
 #define ADM1021_REG_CONFIG_R           0x03
 #define ADM1021_REG_CONFIG_W           0x09
 #define ADM1021_REG_CONV_RATE_R                0x04
 #define ADM1021_REG_CONV_RATE_W                0x0A
 /* These are for the ADM1023's additional precision on the remote temp sensor 
*/
-#define ADM1021_REG_REM_TEMP_PREC      0x010
-#define ADM1021_REG_REM_OFFSET         0x011
-#define ADM1021_REG_REM_OFFSET_PREC    0x012
-#define ADM1021_REG_REM_TOS_PREC       0x013
-#define ADM1021_REG_REM_THYST_PREC     0x014
+#define ADM1023_REG_REM_TEMP_PREC      0x10
+#define ADM1023_REG_REM_OFFSET         0x11
+#define ADM1023_REG_REM_OFFSET_PREC    0x12
+#define ADM1023_REG_REM_TOS_PREC       0x13
+#define ADM1023_REG_REM_THYST_PREC     0x14
 /* limits */
 #define ADM1021_REG_TOS_R              0x05
 #define ADM1021_REG_TOS_W              0x0B
@@ -77,14 +79,13 @@ I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, 
thmc10, lm84, gl523sm,
    these macros are called: arguments may be evaluated more than once.
    Fixing this is just not worth it. */
 /* Conversions  note: 1021 uses normal integer signed-byte format*/
-#define TEMP_FROM_REG(val)     (val > 127 ? (val-256)*1000 : val*1000)
-#define TEMP_TO_REG(val)       (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : 
val/1000),0,255))
+#define TEMP_TO_REG(val)       SENSORS_LIMIT((val) / 1000, -128, 127)
 
 /* Initial values */
 
-/* Note: Even though I left the low and high limits named os and hyst, 
-they don't quite work like a thermostat the way the LM75 does.  I.e., 
-a lower temp than THYST actually triggers an alarm instead of 
+/* Note: Even though I left the low and high limits named os and hyst,
+they don't quite work like a thermostat the way the LM75 does.  I.e.,
+a lower temp than THYST actually triggers an alarm instead of
 clearing it.  Weird, ey?   --Phil  */
 
 /* Each client has this additional data */
@@ -97,12 +98,12 @@ struct adm1021_data {
        char valid;             /* !=0 if following fields are valid */
        unsigned long last_updated;     /* In jiffies */
 
-       u8      temp_max;       /* Register values */
-       u8      temp_hyst;
-       u8      temp_input;
-       u8      remote_temp_max;
-       u8      remote_temp_hyst;
-       u8      remote_temp_input;
+       s8      temp_max;       /* Register values */
+       s8      temp_hyst;
+       s8      temp_input;
+       s8      remote_temp_max;
+       s8      remote_temp_hyst;
+       s8      remote_temp_input;
        u8      alarms;
         /* Special values for ADM1023 only */
        u8      remote_temp_prec;
@@ -116,9 +117,6 @@ static int adm1021_attach_adapter(struct i2c_adapter 
*adapter);
 static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind);
 static void adm1021_init_client(struct i2c_client *client);
 static int adm1021_detach_client(struct i2c_client *client);
-static int adm1021_read_value(struct i2c_client *client, u8 reg);
-static int adm1021_write_value(struct i2c_client *client, u8 reg,
-                              u16 value);
 static struct adm1021_data *adm1021_update_device(struct device *dev);
 
 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
@@ -135,11 +133,12 @@ static struct i2c_driver adm1021_driver = {
        .detach_client  = adm1021_detach_client,
 };
 
-#define show(value)    \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, 
char *buf)              \
+#define show(value)                                                    \
+static ssize_t show_##value(struct device *dev,                                
\
+                           struct device_attribute *attr, char *buf)   \
 {                                                                      \
        struct adm1021_data *data = adm1021_update_device(dev);         \
-       return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value));        \
+       return sprintf(buf, "%d\n", 1000 * data->value);                \
 }
 show(temp_max);
 show(temp_hyst);
@@ -148,26 +147,29 @@ show(remote_temp_max);
 show(remote_temp_hyst);
 show(remote_temp_input);
 
-#define show2(value)   \
-static ssize_t show_##value(struct device *dev, struct device_attribute *attr, 
char *buf)              \
-{                                                                      \
-       struct adm1021_data *data = adm1021_update_device(dev);         \
-       return sprintf(buf, "%d\n", data->value);                       \
+static ssize_t show_alarms(struct device *dev,
+                          struct device_attribute *attr,
+                          char *buf)
+{
+       struct adm1021_data *data = adm1021_update_device(dev);
+       return sprintf(buf, "%u\n", data->alarms);
 }
-show2(alarms);
-
-#define set(value, reg)        \
-static ssize_t set_##value(struct device *dev, struct device_attribute *attr, 
const char *buf, size_t count)   \
-{                                                              \
-       struct i2c_client *client = to_i2c_client(dev);         \
-       struct adm1021_data *data = i2c_get_clientdata(client); \
-       int temp = simple_strtoul(buf, NULL, 10);               \
-                                                               \
-       mutex_lock(&data->update_lock);                         \
-       data->value = TEMP_TO_REG(temp);                        \
-       adm1021_write_value(client, reg, data->value);          \
-       mutex_unlock(&data->update_lock);                       \
-       return count;                                           \
+
+#define set(value, reg)                                                        
\
+static ssize_t set_##value(struct device *dev,                         \
+                          struct device_attribute *attr,               \
+                          const char *buf, size_t count)               \
+{                                                                      \
+       struct i2c_client *client = to_i2c_client(dev);                 \
+       struct adm1021_data *data = i2c_get_clientdata(client);         \
+       int temp = simple_strtoul(buf, NULL, 10);                       \
+                                                                       \
+       mutex_lock(&data->update_lock);                                 \
+       data->value = TEMP_TO_REG(temp);                                \
+       if (!read_only)                                                 \
+               i2c_smbus_write_byte_data(client, reg, data->value);    \
+       mutex_unlock(&data->update_lock);                               \
+       return count;                                                   \
 }
 set(temp_max, ADM1021_REG_TOS_W);
 set(temp_hyst, ADM1021_REG_THYST_W);
@@ -208,35 +210,44 @@ static const struct attribute_group adm1021_group = {
 static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind)
 {
        int i;
-       struct i2c_client *new_client;
+       struct i2c_client *client;
        struct adm1021_data *data;
        int err = 0;
        const char *type_name = "";
+       int conv_rate, status, config;
 
-       if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+       if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+               pr_debug("adm1021: detect failed, "
+                        "smbus byte data not supported!\n");
                goto error0;
+       }
 
        /* OK. For now, we presume we have a valid client. We now create the
           client structure, even though we cannot fill it completely yet.
-          But it allows us to access adm1021_{read,write}_value. */
+          But it allows us to access adm1021 register values. */
 
        if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
+               pr_debug("adm1021: detect failed, kzalloc failed!\n");
                err = -ENOMEM;
                goto error0;
        }
 
-       new_client = &data->client;
-       i2c_set_clientdata(new_client, data);
-       new_client->addr = address;
-       new_client->adapter = adapter;
-       new_client->driver = &adm1021_driver;
-       new_client->flags = 0;
+       client = &data->client;
+       i2c_set_clientdata(client, data);
+       client->addr = address;
+       client->adapter = adapter;
+       client->driver = &adm1021_driver;
+       status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS);
+       conv_rate = i2c_smbus_read_byte_data(client,
+                                            ADM1021_REG_CONV_RATE_R);
+       config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);
 
        /* Now, we do the remaining detection. */
        if (kind < 0) {
-               if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) 
!= 0x00
-                || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 
0x3F) != 0x00
-                || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 
0xF8) != 0x00) {
+               if ((status & 0x03) != 0x00 || (config & 0x3F) != 0x00
+                   || (conv_rate & 0xF8) != 0x00) {
+                       pr_debug("adm1021: detect failed, "
+                                "chip not detected!\n");
                        err = -ENODEV;
                        goto error1;
                }
@@ -244,9 +255,10 @@ static int adm1021_detect(struct i2c_adapter *adapter, int 
address, int kind)
 
        /* Determine the chip type. */
        if (kind <= 0) {
-               i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID);
+               i = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
                if (i == 0x41)
-                       if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) 
& 0x0F0) == 0x030)
+                       if ((i2c_smbus_read_byte_data(client,
+                                       ADM1021_REG_DEV_ID) & 0xF0) == 0x30)
                                kind = adm1023;
                        else
                                kind = adm1021;
@@ -255,15 +267,16 @@ static int adm1021_detect(struct i2c_adapter *adapter, 
int address, int kind)
                else if (i == 0x23)
                        kind = gl523sm;
                else if ((i == 0x4d) &&
-                        (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 
0x01))
+                        (i2c_smbus_read_byte_data(client,
+                                                  ADM1021_REG_DEV_ID) == 0x01))
                        kind = max1617a;
                else if (i == 0x54)
                        kind = mc1066;
                /* LM84 Mfr ID in a different place, and it has more unused 
bits */
-               else if (adm1021_read_value(new_client, 
ADM1021_REG_CONV_RATE_R) == 0x00
-                     && (kind == 0 /* skip extra detection */
-                      || ((adm1021_read_value(new_client, 
ADM1021_REG_CONFIG_R) & 0x7F) == 0x00
-                       && (adm1021_read_value(new_client, ADM1021_REG_STATUS) 
& 0xAB) == 0x00)))
+               else if (conv_rate == 0x00
+                        && (kind == 0 /* skip extra detection */
+                            || ((config & 0x7F) == 0x00
+                                && (status & 0xAB) == 0x00)))
                        kind = lm84;
                else
                        kind = max1617;
@@ -286,26 +299,27 @@ static int adm1021_detect(struct i2c_adapter *adapter, 
int address, int kind)
        } else if (kind == mc1066) {
                type_name = "mc1066";
        }
+       pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
+                type_name, i2c_adapter_id(adapter), address);
 
-       /* Fill in the remaining client fields and put it into the global list 
*/
-       strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+       /* Fill in the remaining client fields */
+       strlcpy(client->name, type_name, I2C_NAME_SIZE);
        data->type = kind;
-       data->valid = 0;
        mutex_init(&data->update_lock);
 
        /* Tell the I2C layer a new client has arrived */
-       if ((err = i2c_attach_client(new_client)))
+       if ((err = i2c_attach_client(client)))
                goto error1;
 
        /* Initialize the ADM1021 chip */
-       if (kind != lm84)
-               adm1021_init_client(new_client);
+       if (kind != lm84 && !read_only)
+               adm1021_init_client(client);
 
        /* Register sysfs hooks */
-       if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1021_group)))
+       if ((err = sysfs_create_group(&client->dev.kobj, &adm1021_group)))
                goto error2;
 
-       data->class_dev = hwmon_device_register(&new_client->dev);
+       data->class_dev = hwmon_device_register(&client->dev);
        if (IS_ERR(data->class_dev)) {
                err = PTR_ERR(data->class_dev);
                goto error3;
@@ -314,9 +328,9 @@ static int adm1021_detect(struct i2c_adapter *adapter, int 
address, int kind)
        return 0;
 
 error3:
-       sysfs_remove_group(&new_client->dev.kobj, &adm1021_group);
+       sysfs_remove_group(&client->dev.kobj, &adm1021_group);
 error2:
-       i2c_detach_client(new_client);
+       i2c_detach_client(client);
 error1:
        kfree(data);
 error0:
@@ -326,10 +340,10 @@ error0:
 static void adm1021_init_client(struct i2c_client *client)
 {
        /* Enable ADC and disable suspend mode */
-       adm1021_write_value(client, ADM1021_REG_CONFIG_W,
-               adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF);
+       i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
+               i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF);
        /* Set Conversion rate to 1/sec (this can be tinkered with) */
-       adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04);
+       i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
 }
 
 static int adm1021_detach_client(struct i2c_client *client)
@@ -347,19 +361,6 @@ static int adm1021_detach_client(struct i2c_client *client)
        return 0;
 }
 
-/* All registers are byte-sized */
-static int adm1021_read_value(struct i2c_client *client, u8 reg)
-{
-       return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
-       if (!read_only)
-               return i2c_smbus_write_byte_data(client, reg, value);
-       return 0;
-}
-
 static struct adm1021_data *adm1021_update_device(struct device *dev)
 {
        struct i2c_client *client = to_i2c_client(dev);
@@ -371,19 +372,36 @@ static struct adm1021_data *adm1021_update_device(struct 
device *dev)
            || !data->valid) {
                dev_dbg(&client->dev, "Starting adm1021 update\n");
 
-               data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP);
-               data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R);
-               data->temp_hyst = adm1021_read_value(client, 
ADM1021_REG_THYST_R);
-               data->remote_temp_input = adm1021_read_value(client, 
ADM1021_REG_REMOTE_TEMP);
-               data->remote_temp_max = adm1021_read_value(client, 
ADM1021_REG_REMOTE_TOS_R);
-               data->remote_temp_hyst = adm1021_read_value(client, 
ADM1021_REG_REMOTE_THYST_R);
-               data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 
0x7c;
+               data->temp_input = i2c_smbus_read_byte_data(client,
+                                               ADM1021_REG_TEMP);
+               data->temp_max = i2c_smbus_read_byte_data(client,
+                                               ADM1021_REG_TOS_R);
+               data->temp_hyst = i2c_smbus_read_byte_data(client,
+                                               ADM1021_REG_THYST_R);
+               data->remote_temp_input = i2c_smbus_read_byte_data(client,
+                                               ADM1021_REG_REMOTE_TEMP);
+               data->remote_temp_max = i2c_smbus_read_byte_data(client,
+                                               ADM1021_REG_REMOTE_TOS_R);
+               data->remote_temp_hyst = i2c_smbus_read_byte_data(client,
+                                               ADM1021_REG_REMOTE_THYST_R);
+               data->alarms = i2c_smbus_read_byte_data(client,
+                                               ADM1021_REG_STATUS) & 0x7c;
                if (data->type == adm1023) {
-                       data->remote_temp_prec = adm1021_read_value(client, 
ADM1021_REG_REM_TEMP_PREC);
-                       data->remote_temp_os_prec = adm1021_read_value(client, 
ADM1021_REG_REM_TOS_PREC);
-                       data->remote_temp_hyst_prec = 
adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC);
-                       data->remote_temp_offset = adm1021_read_value(client, 
ADM1021_REG_REM_OFFSET);
-                       data->remote_temp_offset_prec = 
adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC);
+                       data->remote_temp_prec =
+                               i2c_smbus_read_byte_data(client,
+                                               ADM1023_REG_REM_TEMP_PREC);
+                       data->remote_temp_os_prec =
+                               i2c_smbus_read_byte_data(client,
+                                               ADM1023_REG_REM_TOS_PREC);
+                       data->remote_temp_hyst_prec =
+                               i2c_smbus_read_byte_data(client,
+                                               ADM1023_REG_REM_THYST_PREC);
+                       data->remote_temp_offset =
+                               i2c_smbus_read_byte_data(client,
+                                               ADM1023_REG_REM_OFFSET);
+                       data->remote_temp_offset_prec =
+                               i2c_smbus_read_byte_data(client,
+                                               ADM1023_REG_REM_OFFSET_PREC);
                }
                data->last_updated = jiffies;
                data->valid = 1;
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to