Gitweb:
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bfe8df3d314bddf30758bd738e0087e80964760c
Commit: bfe8df3d314bddf30758bd738e0087e80964760c
Parent: 1bcf548293aef19b0797348332cf1dfbf2116cef
Author: Randy Dunlap <[EMAIL PROTECTED]>
AuthorDate: Tue Oct 16 01:23:46 2007 -0700
Committer: Linus Torvalds <[EMAIL PROTECTED]>
CommitDate: Tue Oct 16 09:42:49 2007 -0700
slow down printk during boot
Optionally add a boot delay after each kernel printk() call, crudely
measured in milliseconds, with a maximum delay of 10 seconds per printk.
Enable CONFIG_BOOT_PRINTK_DELAY=y and then add (e.g.):
"lpj=loops_per_jiffy boot_delay=100"
to the kernel command line.
It has been useful in cases like "during boot, my machine just reboots or
the
screen goes black" by slowing down printk, (and adding initcall_debug), we
can
usually see the last thing that happened before the lights went out which is
usually a valuable clue.
[EMAIL PROTECTED]: not all architectures implement CONFIG_HZ]
[EMAIL PROTECTED]: fix lots of stuff]
[EMAIL PROTECTED]: kernel/printk.c: make 2 variables static]
[EMAIL PROTECTED]: fix slow down printk on boot compile error]
Signed-off-by: Randy Dunlap <[EMAIL PROTECTED]>
Signed-off-by: Dave Jones <[EMAIL PROTECTED]>
Signed-off-by: Adrian Bunk <[EMAIL PROTECTED]>
Signed-off-by: Heiko Carstens <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
---
Documentation/kernel-parameters.txt | 5 +++
include/linux/jiffies.h | 2 +
init/calibrate.c | 2 +-
kernel/printk.c | 59 +++++++++++++++++++++++++++++++++++
lib/Kconfig.debug | 18 ++++++++++
5 files changed, 85 insertions(+), 1 deletions(-)
diff --git a/Documentation/kernel-parameters.txt
b/Documentation/kernel-parameters.txt
index 085e4a0..760ed57 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -349,6 +349,11 @@ and is between 256 and 4096 characters. It is defined in
the file
blkmtd_bs=
blkmtd_count=
+ boot_delay= Milliseconds to delay each printk during boot.
+ Values larger than 10 seconds (10000) are changed to
+ no delay (0).
+ Format: integer
+
bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
bttv.radio= Most important insmod options are available as
kernel args too.
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index e757a74..8b08002 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -148,6 +148,8 @@ static inline u64 get_jiffies_64(void)
*/
#define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
+extern unsigned long preset_lpj;
+
/*
* We want to do realistic conversions of time so we need to use the same
* values the update wall clock code uses as the jiffies size. This value
diff --git a/init/calibrate.c b/init/calibrate.c
index 40ff3b4..2d3d73b 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -10,7 +10,7 @@
#include <asm/timex.h>
-static unsigned long preset_lpj;
+unsigned long preset_lpj;
static int __init lpj_setup(char *str)
{
preset_lpj = simple_strtoul(str,NULL,0);
diff --git a/kernel/printk.c b/kernel/printk.c
index 8451dfc..b2b5c3a 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -22,6 +22,8 @@
#include <linux/tty_driver.h>
#include <linux/console.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h> /* For in_interrupt() */
@@ -162,6 +164,61 @@ out:
__setup("log_buf_len=", log_buf_len_setup);
+#ifdef CONFIG_BOOT_PRINTK_DELAY
+
+static unsigned int boot_delay; /* msecs delay after each printk during bootup
*/
+static unsigned long long printk_delay_msec; /* per msec, based on boot_delay
*/
+
+static int __init boot_delay_setup(char *str)
+{
+ unsigned long lpj;
+ unsigned long long loops_per_msec;
+
+ lpj = preset_lpj ? preset_lpj : 1000000; /* some guess */
+ loops_per_msec = (unsigned long long)lpj / 1000 * HZ;
+
+ get_option(&str, &boot_delay);
+ if (boot_delay > 10 * 1000)
+ boot_delay = 0;
+
+ printk_delay_msec = loops_per_msec;
+ printk(KERN_DEBUG "boot_delay: %u, preset_lpj: %ld, lpj: %lu, "
+ "HZ: %d, printk_delay_msec: %llu\n",
+ boot_delay, preset_lpj, lpj, HZ, printk_delay_msec);
+ return 1;
+}
+__setup("boot_delay=", boot_delay_setup);
+
+static void boot_delay_msec(void)
+{
+ unsigned long long k;
+ unsigned long timeout;
+
+ if (boot_delay == 0 || system_state != SYSTEM_BOOTING)
+ return;
+
+ k = (unsigned long long)printk_delay_msec * boot_delay;
+
+ timeout = jiffies + msecs_to_jiffies(boot_delay);
+ while (k) {
+ k--;
+ cpu_relax();
+ /*
+ * use (volatile) jiffies to prevent
+ * compiler reduction; loop termination via jiffies
+ * is secondary and may or may not happen.
+ */
+ if (time_after(jiffies, timeout))
+ break;
+ touch_nmi_watchdog();
+ }
+}
+#else
+static inline void boot_delay_msec(void)
+{
+}
+#endif
+
/*
* Commands to do_syslog:
*
@@ -527,6 +584,8 @@ asmlinkage int vprintk(const char *fmt, va_list args)
static char printk_buf[1024];
static int log_level_unknown = 1;
+ boot_delay_msec();
+
preempt_disable();
if (unlikely(oops_in_progress) && printk_cpu == smp_processor_id())
/* If a crash is occurring during printk() on this CPU,
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 396c38b..7d16e64 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -413,6 +413,24 @@ config FORCED_INLINING
become the default in the future, until then this option is there to
test gcc for this.
+config BOOT_PRINTK_DELAY
+ bool "Delay each boot printk message by N milliseconds"
+ depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY
+ help
+ This build option allows you to read kernel boot messages
+ by inserting a short delay after each one. The delay is
+ specified in milliseconds on the kernel command line,
+ using "boot_delay=N".
+
+ It is likely that you would also need to use "lpj=M" to preset
+ the "loops per jiffie" value.
+ See a previous boot log for the "lpj" value to use for your
+ system, and then set "lpj=M" before setting "boot_delay=N".
+ NOTE: Using this option may adversely affect SMP systems.
+ I.e., processors other than the first one may not boot up.
+ BOOT_PRINTK_DELAY also may cause DETECT_SOFTLOCKUP to detect
+ what it believes to be lockup conditions.
+
config RCU_TORTURE_TEST
tristate "torture tests for RCU"
depends on DEBUG_KERNEL
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
