Gitweb:
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3c03ec209af1dd8223888630482f1b2353dc6284
Commit: 3c03ec209af1dd8223888630482f1b2353dc6284
Parent: 1c5dd170927b1aa8e3a01d43d611b840336cdaf2
Author: Antonino A. Daplas <[EMAIL PROTECTED]>
AuthorDate: Tue Oct 16 01:29:20 2007 -0700
Committer: Linus Torvalds <[EMAIL PROTECTED]>
CommitDate: Tue Oct 16 09:43:19 2007 -0700
nvidiafb: Add boot option to reverse i2c port assignment
There are a few nvidia hardware where the i2c port assignments are reversed,
i.e., the 1st i2c port is assigned to the secondary display and the 2nd i2c
port to the primary display. In most cases, if only 1 display is attached,
or
if only 1 flatpanel and 1 analog display is attached, the port reversal is
of
no consequence. However if 2 flatpanels are attached, it can cause display
problems.
There is no sane way of determining if the hardware reversed the i2c port
assignment, so the simplest fix is to add a boot/module option, "reverse_i2c
to explicitly reverse the i2c port.
This also restores i2c ordering back to the pre-2.6.22 state.
Signed-off-by: Antonino Daplas <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
---
drivers/video/nvidia/nv_i2c.c | 8 ++++----
drivers/video/nvidia/nv_type.h | 1 +
drivers/video/nvidia/nvidia.c | 6 ++++++
3 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index afe4567..0cbcb3d 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -125,11 +125,11 @@ void nvidia_create_i2c_busses(struct nvidia_par *par)
par->chan[1].par = par;
par->chan[2].par = par;
- par->chan[0].ddc_base = 0x36;
- nvidia_setup_i2c_bus(&par->chan[0], "nvidia #0", I2C_CLASS_HWMON);
+ par->chan[0].ddc_base = (par->reverse_i2c) ? 0x36 : 0x3e;
+ nvidia_setup_i2c_bus(&par->chan[0], "nvidia #0", 0);
- par->chan[1].ddc_base = 0x3e;
- nvidia_setup_i2c_bus(&par->chan[1], "nvidia #1", 0);
+ par->chan[1].ddc_base = (par->reverse_i2c) ? 0x3e : 0x36;
+ nvidia_setup_i2c_bus(&par->chan[1], "nvidia #1", I2C_CLASS_HWMON);
par->chan[2].ddc_base = 0x50;
nvidia_setup_i2c_bus(&par->chan[2], "nvidia #2", 0);
diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/nvidia/nv_type.h
index 2fdf77e..f132aab 100644
--- a/drivers/video/nvidia/nv_type.h
+++ b/drivers/video/nvidia/nv_type.h
@@ -135,6 +135,7 @@ struct nvidia_par {
int paneltweak;
int LVDS;
int pm_state;
+ int reverse_i2c;
u32 crtcSync_read;
u32 fpSyncs;
u32 dmaPut;
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c
index a7fe214..30e14eb 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/nvidia/nvidia.c
@@ -79,6 +79,7 @@ static int noscale __devinitdata = 0;
static int paneltweak __devinitdata = 0;
static int vram __devinitdata = 0;
static int bpp __devinitdata = 8;
+static int reverse_i2c __devinitdata;
#ifdef CONFIG_MTRR
static int nomtrr __devinitdata = 0;
#endif
@@ -1305,6 +1306,7 @@ static int __devinit nvidiafb_probe(struct pci_dev *pd,
par->CRTCnumber = forceCRTC;
par->FpScale = (!noscale);
par->paneltweak = paneltweak;
+ par->reverse_i2c = reverse_i2c;
/* enable IO and mem if not already done */
pci_read_config_word(pd, PCI_COMMAND, &cmd);
@@ -1486,6 +1488,8 @@ static int __devinit nvidiafb_setup(char *options)
noaccel = 1;
} else if (!strncmp(this_opt, "noscale", 7)) {
noscale = 1;
+ } else if (!strncmp(this_opt, "reverse_i2c", 11)) {
+ reverse_i2c = 1;
} else if (!strncmp(this_opt, "paneltweak:", 11)) {
paneltweak = simple_strtoul(this_opt+11, NULL, 0);
} else if (!strncmp(this_opt, "vram:", 5)) {
@@ -1582,6 +1586,8 @@ MODULE_PARM_DESC(mode_option, "Specify initial video
mode");
module_param(bpp, int, 0);
MODULE_PARM_DESC(bpp, "pixel width in bits"
"(default=8)");
+module_param(reverse_i2c, int, 0);
+MODULE_PARM_DESC(reverse_i2c, "reverse port assignment of the i2c bus");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "Disables MTRR support (0 or 1=disabled) "
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
