Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=7b275523aba522aa76891861ee32ba2456e5f146
Commit:     7b275523aba522aa76891861ee32ba2456e5f146
Parent:     633edf5a4fff0675851e377cc5f0c9072683a5f4
Author:     Jesper Nilsson <[EMAIL PROTECTED]>
AuthorDate: Wed Nov 14 17:00:59 2007 -0800
Committer:  Linus Torvalds <[EMAIL PROTECTED]>
CommitDate: Wed Nov 14 18:45:45 2007 -0800

    cris build fixes: corrected and improved NMI and IRQ handling
    
    Corrects compile errors and the following:
    
    - Remove oldset parameter from do_signal and do_notify_resume.
    
    - Modified to fit new consolidated IRQ handling code.
    
    - Reverse check order between external nmi and watchdog nmi to avoid false
      watchdog oops in case of a glitch on the nmi pin.
    
    - Return from an pin-generated NMI the same way as for other interrupts.
    
    - Moved blocking of ethernet rx/tx irq from ethernet interrupt handler to
      low-level asm interrupt handlers.  Fixed in the multiple interrupt
      handler also.
    
    - Add space for thread local storage in thread_info struct.
    
    - Add NO_DMA to Kconfig, and include arch specific Kconfig using arch
      independent path. Include subsystem Kconfigs for pcmcia, usb, i2c,
      rtc and pci.
    
    Signed-off-by: Jesper Nilsson <[EMAIL PROTECTED]>
    Acked-by: Mikael Starvik <[EMAIL PROTECTED]>
    Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
    Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
---
 arch/cris/Kconfig                  |   15 ++++++++-
 arch/cris/arch-v10/drivers/Kconfig |    1 +
 arch/cris/arch-v10/kernel/entry.S  |   41 ++++++++++++-------------
 arch/cris/arch-v10/kernel/irq.c    |   59 ++++++++++++++++++++++++++++++++++-
 arch/cris/kernel/process.c         |    5 +++
 arch/cris/kernel/ptrace.c          |    6 ++--
 include/asm-cris/thread_info.h     |    9 ++++-
 7 files changed, 107 insertions(+), 29 deletions(-)

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index f653772..222da15 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -13,6 +13,10 @@ config ZONE_DMA
        bool
        default y
 
+config NO_DMA
+       bool
+       default y
+
 config RWSEM_GENERIC_SPINLOCK
        bool
        default y
@@ -153,7 +157,8 @@ source "net/Kconfig"
 
 # bring in ETRAX built-in drivers
 menu "Drivers for built-in interfaces"
-source arch/cris/arch-v10/drivers/Kconfig
+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
+source arch/cris/arch/drivers/Kconfig
 
 endmenu
 
@@ -184,6 +189,10 @@ source "drivers/isdn/Kconfig"
 
 source "drivers/telephony/Kconfig"
 
+source "drivers/i2c/Kconfig"
+
+source "drivers/rtc/Kconfig"
+
 #
 # input before char - char/joystick depends on it. As does USB.
 #
@@ -198,6 +207,10 @@ source "fs/Kconfig"
 
 source "sound/Kconfig"
 
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/Kconfig"
+
 source "drivers/usb/Kconfig"
 
 source "kernel/Kconfig.instrumentation"
diff --git a/arch/cris/arch-v10/drivers/Kconfig 
b/arch/cris/arch-v10/drivers/Kconfig
index 03e2e68..e6fc845 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -2,6 +2,7 @@ config ETRAX_ETHERNET
        bool "Ethernet support"
        depends on ETRAX_ARCH_V10
        select NET_ETHERNET
+       select MII
        help
          This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
          controller.
diff --git a/arch/cris/arch-v10/kernel/entry.S 
b/arch/cris/arch-v10/kernel/entry.S
index bc9bed9..ec62c95 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -500,9 +500,8 @@ _work_notifysig:
        ;; deal with pending signals and notify-resume requests
 
        move.d  $r9, $r10       ; do_notify_resume syscall/irq param
-       moveq   0, $r11         ; oldset param - 0 in this case
-       move.d  $sp, $r12       ; the regs param
-       move.d  $r1, $r13       ; the thread_info_flags parameter
+       move.d  $sp, $r11       ; the regs param
+       move.d  $r1, $r12       ; the thread_info_flags parameter
        jsr     do_notify_resume
        
        ba _Rexit
@@ -678,13 +677,19 @@ IRQ1_interrupt:
        push    $r10            ; push orig_r10
        clear.d [$sp=$sp-4]     ; frametype == 0, normal frame
 
+       ;; If there is a glitch on the NMI pin shorter than ~100ns
+       ;; (i.e. non-active by the time we get here) then the nmi_pin bit
+       ;; in R_IRQ_MASK0_RD will already be cleared.  The watchdog_nmi bit
+       ;; is cleared by us however (when feeding the watchdog), which is why
+       ;; we use that bit to determine what brought us here.
+
        move.d  [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog?
-       and.d   0x80000000, $r1
-       beq     wdog
+       and.d   (1<<30), $r1
+       bne     wdog
        move.d  $sp, $r10
        jsr     handle_nmi
        setf m                  ; Enable NMI again
-       retb                    ; Return from NMI
+       ba      _Rexit          ; Return the standard way
        nop
 wdog:
 #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
@@ -775,22 +780,9 @@ multiple_interrupt:
        push    $r10            ; push orig_r10
        clear.d [$sp=$sp-4]     ; frametype == 0, normal frame
        
-       moveq   2, $r2          ; first bit we care about is the timer0 irq
-       move.d  [R_VECT_MASK_RD], $r0; read the irq bits that triggered the 
multiple irq
-       move.d  $r0, [R_VECT_MASK_CLR] ; Block all active IRQs
-1:     
-       btst    $r2, $r0        ; check for the irq given by bit r2
-       bpl     2f
-       move.d  $r2, $r10       ; First argument to do_IRQ
-       move.d  $sp, $r11       ; second argument to do_IRQ
-       jsr     do_IRQ
-2:
-       addq    1, $r2          ; next vector bit
-       cmp.b   32, $r2
-       bne     1b      ; process all irq's up to and including number 31
-       moveq   0, $r9  ; make ret_from_intr realise we came from an ir
+       move.d  $sp, $r10
+       jsr     do_multiple_IRQ
        
-       move.d  $r0, [R_VECT_MASK_SET] ;  Unblock all the IRQs
        jump    ret_from_intr
 
 do_sigtrap:
@@ -837,6 +829,13 @@ _ugdb_handle_breakpoint:
        ba      do_sigtrap              ; SIGTRAP the offending process. 
        pop     $dccr                   ; Restore dccr in delay slot.
        
+       .global kernel_execve
+kernel_execve:
+       move.d __NR_execve, $r9
+       break 13
+       ret
+       nop
+
        .data
 
 hw_bp_trigs:
diff --git a/arch/cris/arch-v10/kernel/irq.c b/arch/cris/arch-v10/kernel/irq.c
index 845c95f..e06ab00 100644
--- a/arch/cris/arch-v10/kernel/irq.c
+++ b/arch/cris/arch-v10/kernel/irq.c
@@ -12,10 +12,16 @@
  */
 
 #include <asm/irq.h>
+#include <asm/current.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+/* From kgdb.c. */
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
 #define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
 #define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 
@@ -75,8 +81,8 @@ BUILD_IRQ(12, 0x1000)
 BUILD_IRQ(13, 0x2000)
 void mmu_bus_fault(void);      /* IRQ 14 is the bus fault interrupt */
 void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */
-BUILD_IRQ(16, 0x10000)
-BUILD_IRQ(17, 0x20000)
+BUILD_IRQ(16, 0x10000 | 0x20000)  /* ethernet tx interrupt needs to block rx */
+BUILD_IRQ(17, 0x20000 | 0x10000)  /* ...and vice versa */
 BUILD_IRQ(18, 0x40000)
 BUILD_IRQ(19, 0x80000)
 BUILD_IRQ(20, 0x100000)
@@ -147,6 +153,55 @@ void system_call(void);  /* from entry.S */
 void do_sigtrap(void); /* from entry.S */
 void gdb_handle_breakpoint(void); /* from entry.S */
 
+extern void do_IRQ(int irq, struct pt_regs * regs);
+
+/* Handle multiple IRQs */
+void do_multiple_IRQ(struct pt_regs* regs)
+{
+       int bit;
+       unsigned masked;
+       unsigned mask;
+       unsigned ethmask = 0;
+
+       /* Get interrupts to mask and handle */
+       mask = masked = *R_VECT_MASK_RD;
+
+       /* Never mask timer IRQ */
+       mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0));
+
+       /*
+        * If either ethernet interrupt (rx or tx) is active then block
+        * the other one too. Unblock afterwards also.
+        */
+       if (mask &
+           (IO_STATE(R_VECT_MASK_RD, dma0, active) |
+            IO_STATE(R_VECT_MASK_RD, dma1, active))) {
+               ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) |
+                          IO_MASK(R_VECT_MASK_RD, dma1));
+       }
+
+       /* Block them */
+       *R_VECT_MASK_CLR = (mask | ethmask);
+
+       /* An extra irq_enter here to prevent softIRQs to run after
+        * each do_IRQ. This will decrease the interrupt latency.
+        */
+       irq_enter();
+
+       /* Handle all IRQs */
+       for (bit = 2; bit < 32; bit++) {
+               if (masked & (1 << bit)) {
+                       do_IRQ(bit, regs);
+               }
+       }
+
+       /* This irq_exit() will trigger the soft IRQs. */
+       irq_exit();
+
+       /* Unblock the IRQs again */
+       *R_VECT_MASK_SET = (masked | ethmask);
+}
+
 /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ 
masks and
    setting the irq vector table.
 */
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 123451c..9ca558f 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -195,6 +195,11 @@ EXPORT_SYMBOL(enable_hlt);
  */
 void (*pm_idle)(void);
 
+extern void default_idle(void);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
 /*
  * The idle thread. There's no useful work to be
  * done, so just try to conserve power and have a
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index 1085d03..3ccd20e 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -81,13 +81,13 @@
 /* notification of userspace execution resumption
  * - triggered by current->work.notify_resume
  */
-extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal(int canrestart, struct pt_regs *regs);
 
 
-void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs, 
+void do_notify_resume(int canrestart, struct pt_regs *regs,
                      __u32 thread_info_flags  )
 {
        /* deal with pending signal delivery */
        if (thread_info_flags & _TIF_SIGPENDING)
-               do_signal(canrestart,oldset,regs);
+               do_signal(canrestart,regs);
 }
diff --git a/include/asm-cris/thread_info.h b/include/asm-cris/thread_info.h
index fde39f6..784668a 100644
--- a/include/asm-cris/thread_info.h
+++ b/include/asm-cris/thread_info.h
@@ -32,6 +32,7 @@ struct thread_info {
        unsigned long           flags;          /* low level flags */
        __u32                   cpu;            /* current CPU */
        int                     preempt_count;  /* 0 => preemptable, <0 => BUG 
*/
+       __u32                   tls;            /* TLS for this thread */
 
        mm_segment_t            addr_limit;     /* thread address space:
                                                   0-0xBFFFFFFF for user-thead
@@ -79,14 +80,18 @@ struct thread_info {
  * - other flags in MSW
  */
 #define TIF_SYSCALL_TRACE      0       /* syscall trace active */
-#define TIF_SIGPENDING         1       /* signal pending */
-#define TIF_NEED_RESCHED       2       /* rescheduling necessary */
+#define TIF_NOTIFY_RESUME      1       /* resumption notification requested */
+#define TIF_SIGPENDING         2       /* signal pending */
+#define TIF_NEED_RESCHED       3       /* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK    9       /* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG     16      /* true if poll_idle() is polling 
TIF_NEED_RESCHED */
 #define TIF_MEMDIE             17
 
 #define _TIF_SYSCALL_TRACE     (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME     (1<<TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING                (1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED      (1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK   (1<<TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG    (1<<TIF_POLLING_NRFLAG)
 
 #define _TIF_WORK_MASK         0x0000FFFE      /* work to do on 
interrupt/exception return */
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to