Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=012c6c72275e66f4e52ae2df629f53a8d127e39f
Commit:     012c6c72275e66f4e52ae2df629f53a8d127e39f
Parent:     1032c0ba9da5c5b53173ad2dcf8b2a2da78f8b17
Author:     Sam Ravnborg <[EMAIL PROTECTED]>
AuthorDate: Tue Nov 6 21:57:20 2007 +0100
Committer:  Sam Ravnborg <[EMAIL PROTECTED]>
CommitDate: Mon Nov 12 21:02:19 2007 +0100

    x86: add X86_32 dependency to i386 specific symbols in Kconfig.i386
    
    To ease unification of Kconfig.i386 and Kconfig.x86_64
    add X86_32 dependencies to all i386 specific symbols.
    
    This patch introduce no functional changes but is one step
    towards unification. This smaller step is used to ease
    review of the patch set.
    
    Signed-off-by: Sam Ravnborg <[EMAIL PROTECTED]>
    Cc: Thomas Gleixner <[EMAIL PROTECTED]>
    Cc: Ingo Molnar <[EMAIL PROTECTED]>
    Cc: "H. Peter Anvin" <[EMAIL PROTECTED]>
---
 arch/x86/Kconfig.i386 |   90 +++++++++++++++++++++++++++++--------------------
 1 files changed, 53 insertions(+), 37 deletions(-)

diff --git a/arch/x86/Kconfig.i386 b/arch/x86/Kconfig.i386
index 9fe63f1..174b909 100644
--- a/arch/x86/Kconfig.i386
+++ b/arch/x86/Kconfig.i386
@@ -137,6 +137,7 @@ config X86_PC
 
 config X86_ELAN
        bool "AMD Elan"
+       depends on X86_32
        help
          Select this for an AMD Elan processor.
 
@@ -146,6 +147,7 @@ config X86_ELAN
 
 config X86_VOYAGER
        bool "Voyager (NCR)"
+       depends on X86_32
        select SMP if !BROKEN
        help
          Voyager is an MCA-based 32-way capable SMP architecture proprietary
@@ -160,6 +162,7 @@ config X86_NUMAQ
        bool "NUMAQ (IBM/Sequent)"
        select SMP
        select NUMA
+       depends on X86_32
        help
          This option is used for getting Linux to run on a (IBM/Sequent) NUMA
          multiquad box. This changes the way that processors are bootstrapped,
@@ -169,7 +172,7 @@ config X86_NUMAQ
 
 config X86_SUMMIT
        bool "Summit/EXA (IBM x440)"
-       depends on SMP
+       depends on X86_32 && SMP
        help
          This option is needed for IBM systems that use the Summit/EXA chipset.
          In particular, it is needed for the x440.
@@ -179,7 +182,7 @@ config X86_SUMMIT
 
 config X86_BIGSMP
        bool "Support for other sub-arch SMP systems with more than 8 CPUs"
-       depends on SMP
+       depends on X86_32 && SMP
        help
          This option is needed for the systems that have more than 8 CPUs
          and if the system is not of any sub-arch type above.
@@ -188,6 +191,7 @@ config X86_BIGSMP
 
 config X86_VISWS
        bool "SGI 320/540 (Visual Workstation)"
+       depends on X86_32
        help
          The SGI Visual Workstation series is an IA32-based workstation
          based on SGI systems chips with some legacy PC hardware attached.
@@ -199,6 +203,7 @@ config X86_VISWS
 
 config X86_GENERICARCH
        bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+       depends on X86_32
        help
           This option compiles in the Summit, bigsmp, ES7000, default 
subarchitectures.
          It is intended for a generic binary kernel.
@@ -206,7 +211,7 @@ config X86_GENERICARCH
 
 config X86_ES7000
        bool "Support for Unisys ES7000 IA32 series"
-       depends on SMP
+       depends on X86_32 && SMP
        help
          Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
          supposed to run on an IA32-based Unisys ES7000 system.
@@ -218,6 +223,7 @@ endchoice
 config SCHED_NO_NO_OMIT_FRAME_POINTER
        bool "Single-depth WCHAN output"
        default y
+       depends on X86_32
        help
          Calculate simpler /proc/<PID>/wchan values. If this option
          is disabled then wchan values will recurse back to the
@@ -228,7 +234,7 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER
 
 config PARAVIRT
        bool
-       depends on !(X86_VISWS || X86_VOYAGER)
+       depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
        help
          This changes the kernel so it can modify itself when it is run
          under a hypervisor, potentially improving performance significantly
@@ -237,6 +243,7 @@ config PARAVIRT
 
 menuconfig PARAVIRT_GUEST
        bool "Paravirtualized guest support"
+       depends on X86_32
        help
          Say Y here to get to see options related to running Linux under
          various hypervisors.  This option alone does not add any kernel code.
@@ -264,7 +271,7 @@ endif
 config ACPI_SRAT
        bool
        default y
-       depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+       depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
        select ACPI_NUMA
 
 config HAVE_ARCH_PARSE_SRAT
@@ -275,12 +282,12 @@ config HAVE_ARCH_PARSE_SRAT
 config X86_SUMMIT_NUMA
        bool
        default y
-       depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+       depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
 
 config X86_CYCLONE_TIMER
        bool
        default y
-       depends on X86_SUMMIT || X86_GENERICARCH
+       depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
 
 config ES7000_CLUSTERED_APIC
        bool
@@ -290,7 +297,8 @@ config ES7000_CLUSTERED_APIC
 source "arch/x86/Kconfig.cpu"
 
 config HPET_TIMER
-       bool "HPET Timer Support"
+       bool
+       prompt "HPET Timer Support" if X86_32
        help
          This enables the use of the HPET for the kernel's internal timer.
          HPET is the next generation timer replacing legacy 8254s.
@@ -341,7 +349,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
        bool "Local APIC support on uniprocessors"
-       depends on !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
+       depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || 
X86_GENERICARCH)
        help
          A local APIC (Advanced Programmable Interrupt Controller) is an
          integrated interrupt controller in the CPU. If you have a single-CPU
@@ -366,17 +374,17 @@ config X86_UP_IOAPIC
 
 config X86_LOCAL_APIC
        bool
-       depends on X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || 
X86_GENERICARCH
+       depends on X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && 
!X86_VOYAGER) || X86_GENERICARCH)
        default y
 
 config X86_IO_APIC
        bool
-       depends on X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || 
X86_GENERICARCH
+       depends on X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || 
X86_VOYAGER)) || X86_GENERICARCH)
        default y
 
 config X86_VISWS_APIC
        bool
-       depends on X86_VISWS
+       depends on X86_32 && X86_VISWS
        default y
 
 config X86_MCE
@@ -398,7 +406,7 @@ config X86_MCE
 
 config X86_MCE_NONFATAL
        tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel 
Pentium 4"
-       depends on X86_MCE
+       depends on X86_32 && X86_MCE
        help
          Enabling this feature starts a timer that triggers every 5 seconds 
which
          will look at the machine check registers to see if anything happened.
@@ -411,14 +419,15 @@ config X86_MCE_NONFATAL
 
 config X86_MCE_P4THERMAL
        bool "check for P4 thermal throttling interrupt."
-       depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
+       depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
        help
          Enabling this feature will cause a message to be printed when the P4
          enters thermal throttling.
 
 config VM86
-       default y
        bool "Enable VM86 support" if EMBEDDED
+       default y
+       depends on X86_32
        help
           This option is required by programs like DOSEMU to run 16-bit legacy
          code on X86 processors. It also may be needed by software like
@@ -427,6 +436,7 @@ config VM86
 
 config TOSHIBA
        tristate "Toshiba Laptop support"
+       depends on X86_32
        ---help---
          This adds a driver to safely access the System Management Mode of
          the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
@@ -442,6 +452,7 @@ config TOSHIBA
 
 config I8K
        tristate "Dell laptop support"
+       depends on X86_32
        ---help---
          This adds a driver to safely access the System Management Mode
          of the CPU on the Dell Inspiron 8000. The System Management Mode
@@ -462,7 +473,7 @@ config I8K
 
 config X86_REBOOTFIXUPS
        bool "Enable X86 board specific fixups for reboot"
-       depends on X86
+       depends on X86_32 && X86
        default n
        ---help---
          This enables chipset and/or board specific fixups to be done
@@ -521,6 +532,7 @@ choice
        prompt "High Memory Support"
        default HIGHMEM4G if !X86_NUMAQ
        default HIGHMEM64G if X86_NUMAQ
+       depends on X86_32
 
 config NOHIGHMEM
        bool "off"
@@ -580,6 +592,7 @@ choice
        depends on EXPERIMENTAL
        prompt "Memory split" if EMBEDDED
        default VMSPLIT_3G
+       depends on X86_32
        help
          Select the desired split between kernel and user memory.
 
@@ -617,16 +630,17 @@ config PAGE_OFFSET
        default 0x78000000 if VMSPLIT_2G_OPT
        default 0x40000000 if VMSPLIT_1G
        default 0xC0000000
+       depends on X86_32
 
 config HIGHMEM
        bool
-       depends on HIGHMEM64G || HIGHMEM4G
+       depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
        default y
 
 config X86_PAE
        bool "PAE (Physical Address Extension) Support"
        default n
-       depends on !HIGHMEM4G
+       depends on X86_32 && !HIGHMEM4G
        select RESOURCES_64BIT
        help
          PAE is required for NX support, and furthermore enables
@@ -637,7 +651,7 @@ config X86_PAE
 # Common NUMA Features
 config NUMA
        bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
-       depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || 
X86_GENERICARCH) && ACPI) && EXPERIMENTAL
+       depends on X86_32 && SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || 
X86_GENERICARCH) && ACPI) && EXPERIMENTAL
        default n if X86_PC
        default y if (X86_NUMAQ || X86_SUMMIT)
        help
@@ -646,7 +660,7 @@ config NUMA
          cause boot failures.
 
 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
-       depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+       depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
 
 config NODES_SHIFT
        int
@@ -656,27 +670,27 @@ config NODES_SHIFT
 
 config HAVE_ARCH_BOOTMEM_NODE
        bool
-       depends on NUMA
+       depends on X86_32 && NUMA
        default y
 
 config ARCH_HAVE_MEMORY_PRESENT
        bool
-       depends on DISCONTIGMEM
+       depends on X86_32 && DISCONTIGMEM
        default y
 
 config NEED_NODE_MEMMAP_SIZE
        bool
-       depends on DISCONTIGMEM || SPARSEMEM
+       depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
        default y
 
 config HAVE_ARCH_ALLOC_REMAP
        bool
-       depends on NUMA
+       depends on X86_32 && NUMA
        default y
 
 config ARCH_FLATMEM_ENABLE
        def_bool y
-       depends on (ARCH_SELECT_MEMORY_MODEL && X86_PC)
+       depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC
 
 config ARCH_DISCONTIGMEM_ENABLE
        def_bool y
@@ -689,11 +703,11 @@ config ARCH_DISCONTIGMEM_DEFAULT
 config ARCH_SPARSEMEM_ENABLE
        def_bool y
        depends on (NUMA || (X86_PC && EXPERIMENTAL))
-       select SPARSEMEM_STATIC
+       select SPARSEMEM_STATIC if X86_32
 
 config ARCH_SELECT_MEMORY_MODEL
        def_bool y
-       depends on ARCH_SPARSEMEM_ENABLE
+       depends on X86_32 && ARCH_SPARSEMEM_ENABLE
 
 config ARCH_POPULATES_NODE_MAP
        def_bool y
@@ -702,7 +716,7 @@ source "mm/Kconfig"
 
 config HIGHPTE
        bool "Allocate 3rd-level pagetables from highmem"
-       depends on HIGHMEM4G || HIGHMEM64G
+       depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
        help
          The VM uses one page table entry for each page of physical memory.
          For systems with a lot of RAM, this can be wasteful of precious
@@ -710,7 +724,8 @@ config HIGHPTE
          entries in high memory.
 
 config MATH_EMULATION
-       bool "Math emulation"
+       bool
+       prompt "Math emulation" if X86_32
        ---help---
          Linux can emulate a math coprocessor (used for floating point
          operations) if you don't have one. 486DX and Pentium processors have
@@ -770,7 +785,7 @@ config MTRR
 
 config EFI
        bool "Boot from EFI support"
-       depends on ACPI
+       depends on X86_32 && ACPI
        default n
        ---help---
        This enables the kernel to boot on EFI platforms using
@@ -788,7 +803,7 @@ config EFI
 
 config IRQBALANCE
        bool "Enable kernel irq balancing"
-       depends on SMP && X86_IO_APIC
+       depends on X86_32 && SMP && X86_IO_APIC
        default y
        help
          The default yes will allow the kernel to do irq load balancing.
@@ -798,7 +813,7 @@ config IRQBALANCE
 # Summit needs it only when NUMA is on
 config BOOT_IOREMAP
        bool
-       depends on (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
+       depends on X86_32 && (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 
&& EFI))
        default y
 
 config SECCOMP
@@ -907,7 +922,8 @@ config RELOCATABLE
          kernel.
 
 config PHYSICAL_ALIGN
-       hex "Alignment value to which kernel should be aligned"
+       hex
+       prompt "Alignment value to which kernel should be aligned" if X86_32
        default "0x100000"
        range 0x2000 0x400000
        help
@@ -940,6 +956,7 @@ config HOTPLUG_CPU
 config COMPAT_VDSO
        bool "Compat VDSO support"
        default y
+       depends on X86_32
        help
          Map the VDSO to the predictable old-style address too.
        ---help---
@@ -974,7 +991,7 @@ config GENERIC_PENDING_IRQ
 
 config X86_SMP
        bool
-       depends on SMP && !X86_VOYAGER
+       depends on X86_32 && SMP && !X86_VOYAGER
        default y
 
 config X86_HT
@@ -984,7 +1001,7 @@ config X86_HT
 
 config X86_BIOS_REBOOT
        bool
-       depends on !(X86_VISWS || X86_VOYAGER)
+       depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
        default y
 
 config X86_TRAMPOLINE
@@ -993,7 +1010,6 @@ config X86_TRAMPOLINE
        default y
 
 config KTIME_SCALAR
-       bool
-       default y
+       def_bool X86_32
 
 source "arch/x86/Kconfig"
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to