Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=c2254f5a744eda55e73f5592d5bdcf75c0a5302c
Commit:     c2254f5a744eda55e73f5592d5bdcf75c0a5302c
Parent:     6c7e2a55d3f89deb5bc478ab1759a3a799890c7d
Author:     Paul Mundt <[EMAIL PROTECTED]>
AuthorDate: Thu Nov 8 18:30:40 2007 +0900
Committer:  Paul Mundt <[EMAIL PROTECTED]>
CommitDate: Mon Jan 28 13:18:38 2008 +0900

    sh: Rename Kconfig to Kconfig.sh.
    
    Signed-off-by: Paul Mundt <[EMAIL PROTECTED]>
---
 arch/sh/Kconfig    |  767 ----------------------------------------------------
 arch/sh/Kconfig.sh |  767 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 767 insertions(+), 767 deletions(-)

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
deleted file mode 100644
index 496d635..0000000
--- a/arch/sh/Kconfig
+++ /dev/null
@@ -1,767 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux/SuperH Kernel Configuration"
-
-config SUPERH
-       bool
-       default y
-       select EMBEDDED
-       help
-         The SuperH is a RISC processor targeted for use in embedded systems
-         and consumer electronics; it was also used in the Sega Dreamcast
-         gaming console.  The SuperH port has a home page at
-         <http://www.linux-sh.org/>.
-
-config RWSEM_GENERIC_SPINLOCK
-       bool
-       default y
-
-config RWSEM_XCHGADD_ALGORITHM
-       bool
-
-config GENERIC_BUG
-       def_bool y
-       depends on BUG
-
-config GENERIC_FIND_NEXT_BIT
-       bool
-       default y
-
-config GENERIC_HWEIGHT
-       bool
-       default y
-
-config GENERIC_HARDIRQS
-       bool
-       default y
-
-config GENERIC_IRQ_PROBE
-       bool
-       default y
-
-config GENERIC_CALIBRATE_DELAY
-       bool
-       default y
-
-config GENERIC_IOMAP
-       bool
-
-config GENERIC_TIME
-       def_bool n
-
-config GENERIC_CLOCKEVENTS
-       def_bool n
-
-config SYS_SUPPORTS_PM
-       bool
-
-config SYS_SUPPORTS_APM_EMULATION
-       bool
-       select SYS_SUPPORTS_PM
-
-config SYS_SUPPORTS_SMP
-       bool
-
-config SYS_SUPPORTS_NUMA
-       bool
-
-config SYS_SUPPORTS_PCI
-       bool
-
-config ARCH_MAY_HAVE_PC_FDC
-       bool
-
-config STACKTRACE_SUPPORT
-       bool
-       default y
-
-config LOCKDEP_SUPPORT
-       bool
-       default y
-
-config ARCH_HAS_ILOG2_U32
-       bool
-       default n
-
-config ARCH_HAS_ILOG2_U64
-       bool
-       default n
-
-config ARCH_NO_VIRT_TO_BUS
-       def_bool y
-
-source "init/Kconfig"
-
-menu "System type"
-
-source "arch/sh/mm/Kconfig"
-
-menu "Processor features"
-
-choice
-       prompt "Endianess selection" 
-       default CPU_LITTLE_ENDIAN
-       help
-         Some SuperH machines can be configured for either little or big
-         endian byte order. These modes require different kernels.
-
-config CPU_LITTLE_ENDIAN
-       bool "Little Endian"
-
-config CPU_BIG_ENDIAN
-       bool "Big Endian"
-
-endchoice
-
-config SH_FPU
-       bool "FPU support"
-       depends on CPU_HAS_FPU
-       default y
-       help
-         Selecting this option will enable support for SH processors that
-         have FPU units (ie, SH77xx).
-
-         This option must be set in order to enable the FPU.
-
-config SH_FPU_EMU
-       bool "FPU emulation support"
-       depends on !SH_FPU && EXPERIMENTAL
-       default n
-       help
-         Selecting this option will enable support for software FPU emulation.
-         Most SH-3 users will want to say Y here, whereas most SH-4 users will
-         want to say N.
-
-config SH_DSP
-       bool "DSP support"
-       depends on CPU_HAS_DSP
-       default y
-       help
-         Selecting this option will enable support for SH processors that
-         have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
-
-         This option must be set in order to enable the DSP.
-
-config SH_ADC
-       bool "ADC support"
-       depends on CPU_SH3
-       default y
-       help
-         Selecting this option will allow the Linux kernel to use SH3 on-chip
-         ADC module.
-
-         If unsure, say N.
-
-config SH_STORE_QUEUES
-       bool "Support for Store Queues"
-       depends on CPU_SH4
-       help
-         Selecting this option will enable an in-kernel API for manipulating
-         the store queues integrated in the SH-4 processors.
-
-config SPECULATIVE_EXECUTION
-       bool "Speculative subroutine return"
-       depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
-       help
-         This enables support for a speculative instruction fetch for
-         subroutine return. There are various pitfalls associated with
-         this, as outlined in the SH7780 hardware manual.
-
-         If unsure, say N.
-
-config CPU_HAS_INTEVT
-       bool
-
-config CPU_HAS_MASKREG_IRQ
-       bool
-
-config CPU_HAS_IPR_IRQ
-       bool
-
-config CPU_HAS_SR_RB
-       bool
-       help
-         This will enable the use of SR.RB register bank usage. Processors
-         that are lacking this bit must have another method in place for
-         accomplishing what is taken care of by the banked registers.
-
-         See <file:Documentation/sh/register-banks.txt> for further
-         information on SR.RB and register banking in the kernel in general.
-
-config CPU_HAS_PTEA
-       bool
-
-config CPU_HAS_DSP
-       bool
-
-config CPU_HAS_FPU
-       bool
-
-endmenu
-
-menu "Board support"
-
-config SOLUTION_ENGINE
-       bool
-
-config SH_SOLUTION_ENGINE
-       bool "SolutionEngine"
-       select SOLUTION_ENGINE
-       select CPU_HAS_IPR_IRQ
-       depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || 
CPU_SUBTYPE_SH7710 || \
-         CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-         CPU_SUBTYPE_SH7750R 
-       help
-         Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-         SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-       bool "SolutionEngine7206"
-       select SOLUTION_ENGINE
-       depends on CPU_SUBTYPE_SH7206
-       help
-         Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-         evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-       bool "SolutionEngine7619"
-       select SOLUTION_ENGINE
-       depends on CPU_SUBTYPE_SH7619
-       help
-         Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-         evaluation board.
-       
-config SH_7722_SOLUTION_ENGINE
-       bool "SolutionEngine7722"
-       select SOLUTION_ENGINE
-       depends on CPU_SUBTYPE_SH7722
-       help
-         Select 7722 SolutionEngine if configuring for a Hitachi SH772
-         evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-       bool "SolutionEngine7751"
-       select SOLUTION_ENGINE
-       select CPU_HAS_IPR_IRQ
-       depends on CPU_SUBTYPE_SH7751
-       help
-         Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-         evaluation board.
-         
-config SH_7780_SOLUTION_ENGINE
-       bool "SolutionEngine7780"
-       select SOLUTION_ENGINE
-       select SYS_SUPPORTS_PCI
-       depends on CPU_SUBTYPE_SH7780
-       help
-         Select 7780 SolutionEngine if configuring for a Renesas SH7780
-         evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-       bool "SolutionEngine7343"
-       select SOLUTION_ENGINE
-       depends on CPU_SUBTYPE_SH7343
-       help
-         Select 7343 SolutionEngine if configuring for a Hitachi
-         SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-       bool "SystemH7751R"
-       depends on CPU_SUBTYPE_SH7751R
-       help
-         Select SystemH if you are configuring for a Renesas SystemH
-         7751R evaluation board.
-
-config SH_HP6XX
-       bool "HP6XX"
-       select SYS_SUPPORTS_APM_EMULATION
-       select HD6446X_SERIES
-       depends on CPU_SUBTYPE_SH7709
-       help
-         Select HP6XX if configuring for a HP jornada HP6xx.
-         More information (hardware only) at
-         <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-       bool "Dreamcast"
-       select SYS_SUPPORTS_PCI
-       depends on CPU_SUBTYPE_SH7091
-       help
-         Select Dreamcast if configuring for a SEGA Dreamcast.
-         More information at <http://www.linux-sh.org>
-
-config SH_MPC1211
-       bool "Interface MPC1211"
-       depends on CPU_SUBTYPE_SH7751 && BROKEN
-       help
-         CTP/PCI-SH02 is a CPU module computer that is produced
-         by Interface Corporation.
-         More information at <http://www.interface.co.jp>
-
-config SH_SH03
-       bool "Interface CTP/PCI-SH03"
-       depends on CPU_SUBTYPE_SH7751
-       select CPU_HAS_IPR_IRQ
-       select SYS_SUPPORTS_PCI
-       help
-         CTP/PCI-SH03 is a CPU module computer that is produced
-         by Interface Corporation.
-         More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-       bool "SecureEdge5410"
-       depends on CPU_SUBTYPE_SH7751R
-       select CPU_HAS_IPR_IRQ
-       select SYS_SUPPORTS_PCI
-       help
-         Select SecureEdge5410 if configuring for a SnapGear SH board.
-         This includes both the OEM SecureEdge products as well as the
-         SME product line.
-
-config SH_HS7751RVOIP
-       bool "HS7751RVOIP"
-       depends on CPU_SUBTYPE_SH7751R
-       help
-         Select HS7751RVOIP if configuring for a Renesas Technology
-         Sales VoIP board.
-
-config SH_7710VOIPGW
-       bool "SH7710-VOIP-GW"
-       depends on CPU_SUBTYPE_SH7710
-       help
-         Select this option to build a kernel for the SH7710 based
-         VOIP GW.
-
-config SH_RTS7751R2D
-       bool "RTS7751R2D"
-       depends on CPU_SUBTYPE_SH7751R
-       select SYS_SUPPORTS_PCI
-       help
-         Select RTS7751R2D if configuring for a Renesas Technology
-         Sales SH-Graphics board.
-
-config SH_HIGHLANDER
-       bool "Highlander"
-       depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-       select SYS_SUPPORTS_PCI
-
-config SH_EDOSK7705
-       bool "EDOSK7705"
-       depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-       bool "SH4-202 MicroDev"
-       depends on CPU_SUBTYPE_SH4_202
-       help
-         Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-         with an SH4-202 CPU.
-
-config SH_LANDISK
-       bool "LANDISK"
-       depends on CPU_SUBTYPE_SH7751R
-       select SYS_SUPPORTS_PCI
-       help
-         I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-       bool "TITAN"
-       depends on CPU_SUBTYPE_SH7751R
-       select CPU_HAS_IPR_IRQ
-       select SYS_SUPPORTS_PCI
-       help
-         Select Titan if you are configuring for a Nimble Microsystems
-         NetEngine NP51R.
-
-config SH_SHMIN
-       bool "SHMIN"
-       depends on CPU_SUBTYPE_SH7706
-       select CPU_HAS_IPR_IRQ
-       help
-         Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-       bool "L-BOX RE2"
-       depends on CPU_SUBTYPE_SH7751R
-       select SYS_SUPPORTS_PCI
-       help
-         Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-       bool "SH-X3 Prototype board"
-       depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-       bool "Magic Panel R2"
-       depends on CPU_SUBTYPE_SH7720
-       help
-         Select Magic Panel R2 if configuring for Magic Panel R2.
-
-endmenu
-
-source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
-
-menu "Timer and clock configuration"
-
-config SH_TMU
-       bool "TMU timer support"
-       depends on CPU_SH3 || CPU_SH4
-       select GENERIC_TIME
-       select GENERIC_CLOCKEVENTS
-       default y
-       help
-         This enables the use of the TMU as the system timer.
-
-config SH_CMT
-       bool "CMT timer support"
-       depends on CPU_SH2
-       default y
-       help
-         This enables the use of the CMT as the system timer.
-
-config SH_MTU2
-       bool "MTU2 timer support"
-       depends on CPU_SH2A
-       default n
-       help
-         This enables the use of the MTU2 as the system timer.
-
-config SH_TIMER_IRQ
-       int
-       default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-       default "86" if CPU_SUBTYPE_SH7619
-       default "140" if CPU_SUBTYPE_SH7206
-       default "16"
-
-config SH_PCLK_FREQ
-       int "Peripheral clock frequency (in Hz)"
-       default "27000000" if CPU_SUBTYPE_SH7343
-       default "31250000" if CPU_SUBTYPE_SH7619
-       default "32000000" if CPU_SUBTYPE_SH7722
-       default "33333333" if CPU_SUBTYPE_SH7770 || \
-                             CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
-                             CPU_SUBTYPE_SH7206
-       default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
-       default "66000000" if CPU_SUBTYPE_SH4_202
-       default "50000000"
-       help
-         This option is used to specify the peripheral clock frequency.
-         This is necessary for determining the reference clock value on
-         platforms lacking an RTC.
-
-config SH_CLK_MD
-       int "CPU Mode Pin Setting"
-       depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
-       default 6 if CPU_SUBTYPE_SH7206
-       default 5 if CPU_SUBTYPE_SH7619
-       default 0
-       help
-         MD2 - MD0 pin setting.
-
-source "kernel/time/Kconfig"
-
-endmenu
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-config SH_CPU_FREQ
-       tristate "SuperH CPU Frequency driver"
-       depends on CPU_FREQ
-       select CPU_FREQ_TABLE
-       help
-         This adds the cpufreq driver for SuperH. At present, only
-         the SH-4 is supported.
-
-         For details, take a look at <file:Documentation/cpu-freq>.
-
-         If unsure, say N.
-
-endmenu
-
-source "arch/sh/drivers/Kconfig"
-
-endmenu
-
-config ISA_DMA_API
-       bool
-       depends on SH_MPC1211
-       default y
-
-menu "Kernel features"
-
-source kernel/Kconfig.hz
-
-config KEXEC
-       bool "kexec system call (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
-       help
-         kexec is a system call that implements the ability to shutdown your
-         current kernel, and to start another kernel.  It is like a reboot
-         but it is independent of the system firmware.  And like a reboot
-         you can start any kernel with it, not just Linux.
-
-         The name comes from the similarity to the exec system call.
-
-         It is an ongoing process to be certain the hardware in a machine
-         is properly shutdown, so do not be surprised if this code does not
-         initially work for you.  It may help to enable device hotplugging
-         support.  As of this writing the exact hardware interface is
-         strongly in flux, so no good recommendation can be made.
-
-config CRASH_DUMP
-       bool "kernel crash dumps (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
-       help
-         Generate crash dump after being started by kexec.
-         This should be normally only set in special crash dump kernels
-         which are loaded in the main kernel with kexec-tools into
-         a specially reserved region and then later executed after
-         a crash by kdump/kexec. The crash dump kernel must be compiled
-         to a memory address not used by the main kernel using
-         MEMORY_START.
-
-         For more details see Documentation/kdump/kdump.txt
-
-config SMP
-       bool "Symmetric multi-processing support"
-       depends on SYS_SUPPORTS_SMP
-       ---help---
-         This enables support for systems with more than one CPU. If you have
-         a system with only one CPU, like most personal computers, say N. If
-         you have a system with more than one CPU, say Y.
-
-         If you say N here, the kernel will run on single and multiprocessor
-         machines, but will use only one CPU of a multiprocessor machine. If
-         you say Y here, the kernel will run on many, but not all,
-         singleprocessor machines. On a singleprocessor machine, the kernel
-         will run faster if you say N here.
-
-         People using multiprocessor machines who say Y here should also say
-         Y to "Enhanced Real Time Clock Support", below.
-
-         See also the <file:Documentation/smp.txt>,
-         <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available
-         at <http://www.tldp.org/docs.html#howto>.
-
-         If you don't know what to do here, say N.
-
-config NR_CPUS
-       int "Maximum number of CPUs (2-32)"
-       range 2 32
-       depends on SMP
-       default "4" if CPU_SHX3
-       default "2"
-       help
-         This allows you to specify the maximum number of CPUs which this
-         kernel will support.  The maximum supported value is 32 and the
-         minimum value which makes sense is 2.
-
-         This is purely to save memory - each supported CPU adds
-         approximately eight kilobytes to the kernel image.
-
-source "kernel/Kconfig.preempt"
-
-config GUSA
-       def_bool y
-       depends on !SMP
-       help
-         This enables support for gUSA (general UserSpace Atomicity).
-         This is the default implementation for both UP and non-ll/sc
-         CPUs, and is used by the libc, amongst others.
-
-         For additional information, design information can be found 
-         in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
-
-         This should only be disabled for special cases where alternate
-         atomicity implementations exist.
-
-endmenu
-
-menu "Boot options"
-
-config ZERO_PAGE_OFFSET
-       hex "Zero page offset"
-       default "0x00004000" if SH_MPC1211 || SH_SH03
-       default "0x00010000" if PAGE_SIZE_64KB
-       default "0x00002000" if PAGE_SIZE_8KB
-       default "0x00001000"
-       help
-         This sets the default offset of zero page.
-
-config BOOT_LINK_OFFSET
-       hex "Link address offset for booting"
-       default "0x00800000"
-       help
-         This option allows you to set the link address offset of the zImage.
-         This can be useful if you are on a board which has a small amount of
-         memory.
-
-config UBC_WAKEUP
-       bool "Wakeup UBC on startup"
-       depends on CPU_SH4 && !CPU_SH4A
-       help
-         Selecting this option will wakeup the User Break Controller (UBC) on
-         startup. Although the UBC is left in an awake state when the processor
-         comes up, some boot loaders misbehave by putting the UBC to sleep in a
-         power saving state, which causes issues with things like ptrace().
-
-         If unsure, say N.
-
-config CMDLINE_BOOL
-       bool "Default bootloader kernel arguments"
-
-config CMDLINE
-       string "Initial kernel command string"
-       depends on CMDLINE_BOOL
-       default "console=ttySC1,115200"
-
-endmenu
-
-menu "Bus options"
-
-# Even on SuperH devices which don't have an ISA bus,
-# this variable helps the PCMCIA modules handle
-# IRQ requesting properly -- Greg Banks.
-#
-# Though we're generally not interested in it when
-# we're not using PCMCIA, so we make it dependent on
-# PCMCIA outright. -- PFM.
-config ISA
-       def_bool y
-       depends on PCMCIA && HD6446X_SERIES
-       help
-         Find out whether you have ISA slots on your motherboard.  ISA is the
-         name of a bus system, i.e. the way the CPU talks to the other stuff
-         inside your box.  Other bus systems are PCI, EISA, MicroChannel
-         (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-         newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config EISA
-       bool
-       ---help---
-         The Extended Industry Standard Architecture (EISA) bus was
-         developed as an open alternative to the IBM MicroChannel bus.
-
-         The EISA bus provided some of the features of the IBM MicroChannel
-         bus while maintaining backward compatibility with cards made for
-         the older ISA bus.  The EISA bus saw limited use between 1988 and
-         1995 when it was made obsolete by the PCI bus.
-
-         Say Y here if you are building a kernel for an EISA-based machine.
-
-         Otherwise, say N.
-
-config MCA
-       bool
-       help
-         MicroChannel Architecture is found in some IBM PS/2 machines and
-         laptops.  It is a bus system similar to PCI or ISA. See
-         <file:Documentation/mca.txt> (and especially the web page given
-         there) before attempting to build an MCA bus kernel.
-
-config SBUS
-       bool
-
-config SUPERHYWAY
-       tristate "SuperHyway Bus support"
-       depends on CPU_SUBTYPE_SH4_202
-
-config MAPLE
-       bool "Maple Bus support"
-       depends on SH_DREAMCAST
-       help
-         The Maple Bus is SEGA's serial communication bus for peripherals
-         on the Dreamcast. Without this bus support you won't be able to
-         get your Dreamcast keyboard etc to work, so most users
-         probably want to say 'Y' here, unless you are only using the
-         Dreamcast with a serial line terminal or a remote network
-         connection.
-
-config CF_ENABLER
-       bool "Compact Flash Enabler support"
-       depends on SOLUTION_ENGINE || SH_SH03
-       ---help---
-         Compact Flash is a small, removable mass storage device introduced
-         in 1994 originally as a PCMCIA device.  If you say `Y' here, you
-         compile in support for Compact Flash devices directly connected to
-         a SuperH processor.  A Compact Flash FAQ is available at
-         <http://www.compactflash.org/faqs/faq.htm>.
-
-         If your board has "Directly Connected" CompactFlash at area 5 or 6,
-         you may want to enable this option.  Then, you can use CF as
-         primary IDE drive (only tested for SanDisk).
-
-         If in doubt, select 'N'.
-
-choice
-       prompt "Compact Flash Connection Area"
-       depends on CF_ENABLER
-       default CF_AREA6
-
-config CF_AREA5
-       bool "Area5"
-       help
-         If your board has "Directly Connected" CompactFlash, You should
-         select the area where your CF is connected to.
-
-         - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
-         - "Area6" if it is connected to Area 6 (0x18000000)
-
-         "Area6" will work for most boards.
-
-config CF_AREA6
-       bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
-       hex
-       depends on CF_ENABLER
-       default "0xb8000000" if CF_AREA6
-       default "0xb4000000" if CF_AREA5
-
-source "arch/sh/drivers/pci/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-menu "Power management options (EXPERIMENTAL)"
-depends on EXPERIMENTAL && SYS_SUPPORTS_PM
-
-source kernel/power/Kconfig
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "kernel/Kconfig.instrumentation"
-
-source "arch/sh/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/sh/Kconfig.sh b/arch/sh/Kconfig.sh
new file mode 100644
index 0000000..496d635
--- /dev/null
+++ b/arch/sh/Kconfig.sh
@@ -0,0 +1,767 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/SuperH Kernel Configuration"
+
+config SUPERH
+       bool
+       default y
+       select EMBEDDED
+       help
+         The SuperH is a RISC processor targeted for use in embedded systems
+         and consumer electronics; it was also used in the Sega Dreamcast
+         gaming console.  The SuperH port has a home page at
+         <http://www.linux-sh.org/>.
+
+config RWSEM_GENERIC_SPINLOCK
+       bool
+       default y
+
+config RWSEM_XCHGADD_ALGORITHM
+       bool
+
+config GENERIC_BUG
+       def_bool y
+       depends on BUG
+
+config GENERIC_FIND_NEXT_BIT
+       bool
+       default y
+
+config GENERIC_HWEIGHT
+       bool
+       default y
+
+config GENERIC_HARDIRQS
+       bool
+       default y
+
+config GENERIC_IRQ_PROBE
+       bool
+       default y
+
+config GENERIC_CALIBRATE_DELAY
+       bool
+       default y
+
+config GENERIC_IOMAP
+       bool
+
+config GENERIC_TIME
+       def_bool n
+
+config GENERIC_CLOCKEVENTS
+       def_bool n
+
+config SYS_SUPPORTS_PM
+       bool
+
+config SYS_SUPPORTS_APM_EMULATION
+       bool
+       select SYS_SUPPORTS_PM
+
+config SYS_SUPPORTS_SMP
+       bool
+
+config SYS_SUPPORTS_NUMA
+       bool
+
+config SYS_SUPPORTS_PCI
+       bool
+
+config ARCH_MAY_HAVE_PC_FDC
+       bool
+
+config STACKTRACE_SUPPORT
+       bool
+       default y
+
+config LOCKDEP_SUPPORT
+       bool
+       default y
+
+config ARCH_HAS_ILOG2_U32
+       bool
+       default n
+
+config ARCH_HAS_ILOG2_U64
+       bool
+       default n
+
+config ARCH_NO_VIRT_TO_BUS
+       def_bool y
+
+source "init/Kconfig"
+
+menu "System type"
+
+source "arch/sh/mm/Kconfig"
+
+menu "Processor features"
+
+choice
+       prompt "Endianess selection" 
+       default CPU_LITTLE_ENDIAN
+       help
+         Some SuperH machines can be configured for either little or big
+         endian byte order. These modes require different kernels.
+
+config CPU_LITTLE_ENDIAN
+       bool "Little Endian"
+
+config CPU_BIG_ENDIAN
+       bool "Big Endian"
+
+endchoice
+
+config SH_FPU
+       bool "FPU support"
+       depends on CPU_HAS_FPU
+       default y
+       help
+         Selecting this option will enable support for SH processors that
+         have FPU units (ie, SH77xx).
+
+         This option must be set in order to enable the FPU.
+
+config SH_FPU_EMU
+       bool "FPU emulation support"
+       depends on !SH_FPU && EXPERIMENTAL
+       default n
+       help
+         Selecting this option will enable support for software FPU emulation.
+         Most SH-3 users will want to say Y here, whereas most SH-4 users will
+         want to say N.
+
+config SH_DSP
+       bool "DSP support"
+       depends on CPU_HAS_DSP
+       default y
+       help
+         Selecting this option will enable support for SH processors that
+         have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
+
+         This option must be set in order to enable the DSP.
+
+config SH_ADC
+       bool "ADC support"
+       depends on CPU_SH3
+       default y
+       help
+         Selecting this option will allow the Linux kernel to use SH3 on-chip
+         ADC module.
+
+         If unsure, say N.
+
+config SH_STORE_QUEUES
+       bool "Support for Store Queues"
+       depends on CPU_SH4
+       help
+         Selecting this option will enable an in-kernel API for manipulating
+         the store queues integrated in the SH-4 processors.
+
+config SPECULATIVE_EXECUTION
+       bool "Speculative subroutine return"
+       depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+       help
+         This enables support for a speculative instruction fetch for
+         subroutine return. There are various pitfalls associated with
+         this, as outlined in the SH7780 hardware manual.
+
+         If unsure, say N.
+
+config CPU_HAS_INTEVT
+       bool
+
+config CPU_HAS_MASKREG_IRQ
+       bool
+
+config CPU_HAS_IPR_IRQ
+       bool
+
+config CPU_HAS_SR_RB
+       bool
+       help
+         This will enable the use of SR.RB register bank usage. Processors
+         that are lacking this bit must have another method in place for
+         accomplishing what is taken care of by the banked registers.
+
+         See <file:Documentation/sh/register-banks.txt> for further
+         information on SR.RB and register banking in the kernel in general.
+
+config CPU_HAS_PTEA
+       bool
+
+config CPU_HAS_DSP
+       bool
+
+config CPU_HAS_FPU
+       bool
+
+endmenu
+
+menu "Board support"
+
+config SOLUTION_ENGINE
+       bool
+
+config SH_SOLUTION_ENGINE
+       bool "SolutionEngine"
+       select SOLUTION_ENGINE
+       select CPU_HAS_IPR_IRQ
+       depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || 
CPU_SUBTYPE_SH7710 || \
+         CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+         CPU_SUBTYPE_SH7750R 
+       help
+         Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+         SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+       bool "SolutionEngine7206"
+       select SOLUTION_ENGINE
+       depends on CPU_SUBTYPE_SH7206
+       help
+         Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+         evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+       bool "SolutionEngine7619"
+       select SOLUTION_ENGINE
+       depends on CPU_SUBTYPE_SH7619
+       help
+         Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+         evaluation board.
+       
+config SH_7722_SOLUTION_ENGINE
+       bool "SolutionEngine7722"
+       select SOLUTION_ENGINE
+       depends on CPU_SUBTYPE_SH7722
+       help
+         Select 7722 SolutionEngine if configuring for a Hitachi SH772
+         evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+       bool "SolutionEngine7751"
+       select SOLUTION_ENGINE
+       select CPU_HAS_IPR_IRQ
+       depends on CPU_SUBTYPE_SH7751
+       help
+         Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+         evaluation board.
+         
+config SH_7780_SOLUTION_ENGINE
+       bool "SolutionEngine7780"
+       select SOLUTION_ENGINE
+       select SYS_SUPPORTS_PCI
+       depends on CPU_SUBTYPE_SH7780
+       help
+         Select 7780 SolutionEngine if configuring for a Renesas SH7780
+         evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+       bool "SolutionEngine7343"
+       select SOLUTION_ENGINE
+       depends on CPU_SUBTYPE_SH7343
+       help
+         Select 7343 SolutionEngine if configuring for a Hitachi
+         SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+       bool "SystemH7751R"
+       depends on CPU_SUBTYPE_SH7751R
+       help
+         Select SystemH if you are configuring for a Renesas SystemH
+         7751R evaluation board.
+
+config SH_HP6XX
+       bool "HP6XX"
+       select SYS_SUPPORTS_APM_EMULATION
+       select HD6446X_SERIES
+       depends on CPU_SUBTYPE_SH7709
+       help
+         Select HP6XX if configuring for a HP jornada HP6xx.
+         More information (hardware only) at
+         <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+       bool "Dreamcast"
+       select SYS_SUPPORTS_PCI
+       depends on CPU_SUBTYPE_SH7091
+       help
+         Select Dreamcast if configuring for a SEGA Dreamcast.
+         More information at <http://www.linux-sh.org>
+
+config SH_MPC1211
+       bool "Interface MPC1211"
+       depends on CPU_SUBTYPE_SH7751 && BROKEN
+       help
+         CTP/PCI-SH02 is a CPU module computer that is produced
+         by Interface Corporation.
+         More information at <http://www.interface.co.jp>
+
+config SH_SH03
+       bool "Interface CTP/PCI-SH03"
+       depends on CPU_SUBTYPE_SH7751
+       select CPU_HAS_IPR_IRQ
+       select SYS_SUPPORTS_PCI
+       help
+         CTP/PCI-SH03 is a CPU module computer that is produced
+         by Interface Corporation.
+         More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+       bool "SecureEdge5410"
+       depends on CPU_SUBTYPE_SH7751R
+       select CPU_HAS_IPR_IRQ
+       select SYS_SUPPORTS_PCI
+       help
+         Select SecureEdge5410 if configuring for a SnapGear SH board.
+         This includes both the OEM SecureEdge products as well as the
+         SME product line.
+
+config SH_HS7751RVOIP
+       bool "HS7751RVOIP"
+       depends on CPU_SUBTYPE_SH7751R
+       help
+         Select HS7751RVOIP if configuring for a Renesas Technology
+         Sales VoIP board.
+
+config SH_7710VOIPGW
+       bool "SH7710-VOIP-GW"
+       depends on CPU_SUBTYPE_SH7710
+       help
+         Select this option to build a kernel for the SH7710 based
+         VOIP GW.
+
+config SH_RTS7751R2D
+       bool "RTS7751R2D"
+       depends on CPU_SUBTYPE_SH7751R
+       select SYS_SUPPORTS_PCI
+       help
+         Select RTS7751R2D if configuring for a Renesas Technology
+         Sales SH-Graphics board.
+
+config SH_HIGHLANDER
+       bool "Highlander"
+       depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+       select SYS_SUPPORTS_PCI
+
+config SH_EDOSK7705
+       bool "EDOSK7705"
+       depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+       bool "SH4-202 MicroDev"
+       depends on CPU_SUBTYPE_SH4_202
+       help
+         Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+         with an SH4-202 CPU.
+
+config SH_LANDISK
+       bool "LANDISK"
+       depends on CPU_SUBTYPE_SH7751R
+       select SYS_SUPPORTS_PCI
+       help
+         I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+       bool "TITAN"
+       depends on CPU_SUBTYPE_SH7751R
+       select CPU_HAS_IPR_IRQ
+       select SYS_SUPPORTS_PCI
+       help
+         Select Titan if you are configuring for a Nimble Microsystems
+         NetEngine NP51R.
+
+config SH_SHMIN
+       bool "SHMIN"
+       depends on CPU_SUBTYPE_SH7706
+       select CPU_HAS_IPR_IRQ
+       help
+         Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+       bool "L-BOX RE2"
+       depends on CPU_SUBTYPE_SH7751R
+       select SYS_SUPPORTS_PCI
+       help
+         Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+       bool "SH-X3 Prototype board"
+       depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+       bool "Magic Panel R2"
+       depends on CPU_SUBTYPE_SH7720
+       help
+         Select Magic Panel R2 if configuring for Magic Panel R2.
+
+endmenu
+
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
+source "arch/sh/boards/magicpanelr2/Kconfig"
+
+menu "Timer and clock configuration"
+
+config SH_TMU
+       bool "TMU timer support"
+       depends on CPU_SH3 || CPU_SH4
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
+       default y
+       help
+         This enables the use of the TMU as the system timer.
+
+config SH_CMT
+       bool "CMT timer support"
+       depends on CPU_SH2
+       default y
+       help
+         This enables the use of the CMT as the system timer.
+
+config SH_MTU2
+       bool "MTU2 timer support"
+       depends on CPU_SH2A
+       default n
+       help
+         This enables the use of the MTU2 as the system timer.
+
+config SH_TIMER_IRQ
+       int
+       default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+       default "86" if CPU_SUBTYPE_SH7619
+       default "140" if CPU_SUBTYPE_SH7206
+       default "16"
+
+config SH_PCLK_FREQ
+       int "Peripheral clock frequency (in Hz)"
+       default "27000000" if CPU_SUBTYPE_SH7343
+       default "31250000" if CPU_SUBTYPE_SH7619
+       default "32000000" if CPU_SUBTYPE_SH7722
+       default "33333333" if CPU_SUBTYPE_SH7770 || \
+                             CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
+                             CPU_SUBTYPE_SH7206
+       default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
+       default "66000000" if CPU_SUBTYPE_SH4_202
+       default "50000000"
+       help
+         This option is used to specify the peripheral clock frequency.
+         This is necessary for determining the reference clock value on
+         platforms lacking an RTC.
+
+config SH_CLK_MD
+       int "CPU Mode Pin Setting"
+       depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
+       default 6 if CPU_SUBTYPE_SH7206
+       default 5 if CPU_SUBTYPE_SH7619
+       default 0
+       help
+         MD2 - MD0 pin setting.
+
+source "kernel/time/Kconfig"
+
+endmenu
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config SH_CPU_FREQ
+       tristate "SuperH CPU Frequency driver"
+       depends on CPU_FREQ
+       select CPU_FREQ_TABLE
+       help
+         This adds the cpufreq driver for SuperH. At present, only
+         the SH-4 is supported.
+
+         For details, take a look at <file:Documentation/cpu-freq>.
+
+         If unsure, say N.
+
+endmenu
+
+source "arch/sh/drivers/Kconfig"
+
+endmenu
+
+config ISA_DMA_API
+       bool
+       depends on SH_MPC1211
+       default y
+
+menu "Kernel features"
+
+source kernel/Kconfig.hz
+
+config KEXEC
+       bool "kexec system call (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       help
+         kexec is a system call that implements the ability to shutdown your
+         current kernel, and to start another kernel.  It is like a reboot
+         but it is independent of the system firmware.  And like a reboot
+         you can start any kernel with it, not just Linux.
+
+         The name comes from the similarity to the exec system call.
+
+         It is an ongoing process to be certain the hardware in a machine
+         is properly shutdown, so do not be surprised if this code does not
+         initially work for you.  It may help to enable device hotplugging
+         support.  As of this writing the exact hardware interface is
+         strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+       bool "kernel crash dumps (EXPERIMENTAL)"
+       depends on EXPERIMENTAL
+       help
+         Generate crash dump after being started by kexec.
+         This should be normally only set in special crash dump kernels
+         which are loaded in the main kernel with kexec-tools into
+         a specially reserved region and then later executed after
+         a crash by kdump/kexec. The crash dump kernel must be compiled
+         to a memory address not used by the main kernel using
+         MEMORY_START.
+
+         For more details see Documentation/kdump/kdump.txt
+
+config SMP
+       bool "Symmetric multi-processing support"
+       depends on SYS_SUPPORTS_SMP
+       ---help---
+         This enables support for systems with more than one CPU. If you have
+         a system with only one CPU, like most personal computers, say N. If
+         you have a system with more than one CPU, say Y.
+
+         If you say N here, the kernel will run on single and multiprocessor
+         machines, but will use only one CPU of a multiprocessor machine. If
+         you say Y here, the kernel will run on many, but not all,
+         singleprocessor machines. On a singleprocessor machine, the kernel
+         will run faster if you say N here.
+
+         People using multiprocessor machines who say Y here should also say
+         Y to "Enhanced Real Time Clock Support", below.
+
+         See also the <file:Documentation/smp.txt>,
+         <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available
+         at <http://www.tldp.org/docs.html#howto>.
+
+         If you don't know what to do here, say N.
+
+config NR_CPUS
+       int "Maximum number of CPUs (2-32)"
+       range 2 32
+       depends on SMP
+       default "4" if CPU_SHX3
+       default "2"
+       help
+         This allows you to specify the maximum number of CPUs which this
+         kernel will support.  The maximum supported value is 32 and the
+         minimum value which makes sense is 2.
+
+         This is purely to save memory - each supported CPU adds
+         approximately eight kilobytes to the kernel image.
+
+source "kernel/Kconfig.preempt"
+
+config GUSA
+       def_bool y
+       depends on !SMP
+       help
+         This enables support for gUSA (general UserSpace Atomicity).
+         This is the default implementation for both UP and non-ll/sc
+         CPUs, and is used by the libc, amongst others.
+
+         For additional information, design information can be found 
+         in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
+
+         This should only be disabled for special cases where alternate
+         atomicity implementations exist.
+
+endmenu
+
+menu "Boot options"
+
+config ZERO_PAGE_OFFSET
+       hex "Zero page offset"
+       default "0x00004000" if SH_MPC1211 || SH_SH03
+       default "0x00010000" if PAGE_SIZE_64KB
+       default "0x00002000" if PAGE_SIZE_8KB
+       default "0x00001000"
+       help
+         This sets the default offset of zero page.
+
+config BOOT_LINK_OFFSET
+       hex "Link address offset for booting"
+       default "0x00800000"
+       help
+         This option allows you to set the link address offset of the zImage.
+         This can be useful if you are on a board which has a small amount of
+         memory.
+
+config UBC_WAKEUP
+       bool "Wakeup UBC on startup"
+       depends on CPU_SH4 && !CPU_SH4A
+       help
+         Selecting this option will wakeup the User Break Controller (UBC) on
+         startup. Although the UBC is left in an awake state when the processor
+         comes up, some boot loaders misbehave by putting the UBC to sleep in a
+         power saving state, which causes issues with things like ptrace().
+
+         If unsure, say N.
+
+config CMDLINE_BOOL
+       bool "Default bootloader kernel arguments"
+
+config CMDLINE
+       string "Initial kernel command string"
+       depends on CMDLINE_BOOL
+       default "console=ttySC1,115200"
+
+endmenu
+
+menu "Bus options"
+
+# Even on SuperH devices which don't have an ISA bus,
+# this variable helps the PCMCIA modules handle
+# IRQ requesting properly -- Greg Banks.
+#
+# Though we're generally not interested in it when
+# we're not using PCMCIA, so we make it dependent on
+# PCMCIA outright. -- PFM.
+config ISA
+       def_bool y
+       depends on PCMCIA && HD6446X_SERIES
+       help
+         Find out whether you have ISA slots on your motherboard.  ISA is the
+         name of a bus system, i.e. the way the CPU talks to the other stuff
+         inside your box.  Other bus systems are PCI, EISA, MicroChannel
+         (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+         newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+config EISA
+       bool
+       ---help---
+         The Extended Industry Standard Architecture (EISA) bus was
+         developed as an open alternative to the IBM MicroChannel bus.
+
+         The EISA bus provided some of the features of the IBM MicroChannel
+         bus while maintaining backward compatibility with cards made for
+         the older ISA bus.  The EISA bus saw limited use between 1988 and
+         1995 when it was made obsolete by the PCI bus.
+
+         Say Y here if you are building a kernel for an EISA-based machine.
+
+         Otherwise, say N.
+
+config MCA
+       bool
+       help
+         MicroChannel Architecture is found in some IBM PS/2 machines and
+         laptops.  It is a bus system similar to PCI or ISA. See
+         <file:Documentation/mca.txt> (and especially the web page given
+         there) before attempting to build an MCA bus kernel.
+
+config SBUS
+       bool
+
+config SUPERHYWAY
+       tristate "SuperHyway Bus support"
+       depends on CPU_SUBTYPE_SH4_202
+
+config MAPLE
+       bool "Maple Bus support"
+       depends on SH_DREAMCAST
+       help
+         The Maple Bus is SEGA's serial communication bus for peripherals
+         on the Dreamcast. Without this bus support you won't be able to
+         get your Dreamcast keyboard etc to work, so most users
+         probably want to say 'Y' here, unless you are only using the
+         Dreamcast with a serial line terminal or a remote network
+         connection.
+
+config CF_ENABLER
+       bool "Compact Flash Enabler support"
+       depends on SOLUTION_ENGINE || SH_SH03
+       ---help---
+         Compact Flash is a small, removable mass storage device introduced
+         in 1994 originally as a PCMCIA device.  If you say `Y' here, you
+         compile in support for Compact Flash devices directly connected to
+         a SuperH processor.  A Compact Flash FAQ is available at
+         <http://www.compactflash.org/faqs/faq.htm>.
+
+         If your board has "Directly Connected" CompactFlash at area 5 or 6,
+         you may want to enable this option.  Then, you can use CF as
+         primary IDE drive (only tested for SanDisk).
+
+         If in doubt, select 'N'.
+
+choice
+       prompt "Compact Flash Connection Area"
+       depends on CF_ENABLER
+       default CF_AREA6
+
+config CF_AREA5
+       bool "Area5"
+       help
+         If your board has "Directly Connected" CompactFlash, You should
+         select the area where your CF is connected to.
+
+         - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
+         - "Area6" if it is connected to Area 6 (0x18000000)
+
+         "Area6" will work for most boards.
+
+config CF_AREA6
+       bool "Area6"
+
+endchoice
+
+config CF_BASE_ADDR
+       hex
+       depends on CF_ENABLER
+       default "0xb8000000" if CF_AREA6
+       default "0xb4000000" if CF_AREA5
+
+source "arch/sh/drivers/pci/Kconfig"
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options (EXPERIMENTAL)"
+depends on EXPERIMENTAL && SYS_SUPPORTS_PM
+
+source kernel/power/Kconfig
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "kernel/Kconfig.instrumentation"
+
+source "arch/sh/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to