Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1fea8e8838d009545d94588ac41037d8f20f969d
Commit:     1fea8e8838d009545d94588ac41037d8f20f969d
Parent:     f7d09d7c453f197d802c50172b27170a43e1a816
Author:     Ben Cahill <[EMAIL PROTECTED]>
AuthorDate: Thu Nov 29 11:09:52 2007 +0800
Committer:  David S. Miller <[EMAIL PROTECTED]>
CommitDate: Mon Jan 28 15:05:21 2008 -0800

    iwlwifi: Partially clean-up, add comments to iwl-*-hw.h
    
    Partially clean-up, add comments to iwl-XXXX-hw.h
    
    Signed-off-by: Ben Cahill <[EMAIL PROTECTED]>
    Signed-off-by: Zhu Yi <[EMAIL PROTECTED]>
    Signed-off-by: John W. Linville <[EMAIL PROTECTED]>
---
 drivers/net/wireless/iwlwifi/iwl-3945-hw.h |   66 ++++++++++++++++-------
 drivers/net/wireless/iwlwifi/iwl-4965-hw.h |   78 ++++++++++++++++++----------
 2 files changed, 97 insertions(+), 47 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h 
b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
index 2c9f884..97bffb1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
@@ -64,10 +64,11 @@
 #ifndef __iwl_3945_hw__
 #define __iwl_3945_hw__
 
-/* uCode queue management definitions */
+/*
+ * uCode queue management definitions ...
+ * Queue #4 is the command queue for 3945 and 4965.
+ */
 #define IWL_CMD_QUEUE_NUM       4
-#define IWL_CMD_FIFO_NUM        4
-#define IWL_BACK_QUEUE_FIRST_ID 7
 
 /* Tx rates */
 #define IWL_CCK_RATES 4
@@ -314,7 +315,6 @@ struct iwl3945_eeprom {
 
        u8 reserved9[194];
 
-
 /*
  * 3945 Txpower calibration data.
  */
@@ -355,7 +355,18 @@ struct iwl3945_eeprom {
 #define CSR_GPIO_IN             (CSR_BASE+0x018) /* read external chip pins */
 #define CSR_RESET               (CSR_BASE+0x020) /* busmaster enable, NMI, 
etc*/
 #define CSR_GP_CNTRL            (CSR_BASE+0x024)
+
+/*
+ * Hardware revision info
+ * Bit fields:
+ * 31-8:  Reserved
+ *  7-4:  Type of device:  0x0 = 4965, 0xd = 3945
+ *  3-2:  Revision step:  0 = A, 1 = B, 2 = C, 3 = D
+ *  1-0:  "Dash" value, as in A-1, etc.
+ */
 #define CSR_HW_REV              (CSR_BASE+0x028)
+
+/* EEPROM reads */
 #define CSR_EEPROM_REG          (CSR_BASE+0x02c)
 #define CSR_EEPROM_GP           (CSR_BASE+0x030)
 #define CSR_GP_UCODE           (CSR_BASE+0x044)
@@ -363,13 +374,13 @@ struct iwl3945_eeprom {
 #define CSR_UCODE_DRV_GP1_SET   (CSR_BASE+0x058)
 #define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
 #define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
-#define CSR_LED_REG            (CSR_BASE+0x094)
-#define CSR_DRAM_INT_TBL_CTL   (CSR_BASE+0x0A0)
 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
+
+/* Analog phase-lock-loop configuration (3945 only)
+ * Set bit 24. */
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
-#define CSR_HW_REV_WA_REG      (CSR_BASE+0x22C)
 
-/* HW I/F configuration */
+/* Bits for CSR_HW_IF_CONFIG_REG */
 #define CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MB         (0x00000100)
 #define CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MM         (0x00000200)
 #define CSR_HW_IF_CONFIG_REG_BIT_SKU_MRC            (0x00000400)
@@ -468,31 +479,46 @@ struct iwl3945_eeprom {
 /* CSR_ANA_PLL_CFG */
 #define CSR_ANA_PLL_CFG_SH             (0x00880300)
 
-#define CSR_LED_REG_TRUN_ON            (0x00000078)
-#define CSR_LED_REG_TRUN_OFF           (0x00000038)
-#define CSR_LED_BSM_CTRL_MSK           (0xFFFFFFDF)
-
-/* DRAM_INT_TBL_CTRL */
-#define CSR_DRAM_INT_TBL_CTRL_EN       (1<<31)
-#define CSR_DRAM_INT_TBL_CTRL_WRAP_CHK (1<<27)
-
 /*=== HBUS (Host-side Bus) ===*/
 #define HBUS_BASE      (0x400)
 
+/*
+ * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
+ * structures, error log, event log, verifying uCode load).
+ * First write to address register, then read from or write to data register
+ * to complete the job.  Once the address register is set up, accesses to
+ * data registers auto-increment the address by one dword.
+ * Bit usage for address registers (read or write):
+ *  0-31:  memory address within device
+ */
 #define HBUS_TARG_MEM_RADDR     (HBUS_BASE+0x00c)
 #define HBUS_TARG_MEM_WADDR     (HBUS_BASE+0x010)
 #define HBUS_TARG_MEM_WDAT      (HBUS_BASE+0x018)
 #define HBUS_TARG_MEM_RDAT      (HBUS_BASE+0x01c)
+
+/*
+ * Registers for accessing device's internal peripheral registers
+ * (e.g. SCD, BSM, etc.).  First write to address register,
+ * then read from or write to data register to complete the job.
+ * Bit usage for address registers (read or write):
+ *  0-15:  register address (offset) within device
+ * 24-25:  (# bytes - 1) to read or write (e.g. 3 for dword)
+ */
 #define HBUS_TARG_PRPH_WADDR    (HBUS_BASE+0x044)
 #define HBUS_TARG_PRPH_RADDR    (HBUS_BASE+0x048)
 #define HBUS_TARG_PRPH_WDAT     (HBUS_BASE+0x04c)
 #define HBUS_TARG_PRPH_RDAT     (HBUS_BASE+0x050)
-#define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)
-
-#define HBUS_TARG_MBX_C         (HBUS_BASE+0x030)
 
+/*
+ * Per-Tx-queue write pointer (index, really!) (3945 and 4965).
+ * Indicates index to next TFD that driver will fill (1 past latest filled).
+ * Bit usage:
+ *  0-7:  queue write index
+ * 11-8:  queue selector
+ */
+#define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)
 
-/* SCD (Scheduler) */
+/* SCD (3945 Tx Frame Scheduler) */
 #define SCD_BASE                        (CSR_BASE + 0x2E00)
 
 #define SCD_MODE_REG                    (SCD_BASE + 0x000)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h 
b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
index f0371ad..e7bce82 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
@@ -64,7 +64,12 @@
 #ifndef __iwl_4965_hw_h__
 #define __iwl_4965_hw_h__
 
-/* uCode queue management definitions */
+/*
+ * uCode queue management definitions ...
+ * Queue #4 is the command queue for 3945 and 4965; map it to Tx FIFO chnl 4.
+ * The first queue used for block-ack aggregation is #7 (4965 only).
+ * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7.
+ */
 #define IWL_CMD_QUEUE_NUM       4
 #define IWL_CMD_FIFO_NUM        4
 #define IWL_BACK_QUEUE_FIRST_ID 7
@@ -444,7 +449,20 @@ struct iwl4965_eeprom {
 #define CSR_GPIO_IN             (CSR_BASE+0x018) /* read external chip pins */
 #define CSR_RESET               (CSR_BASE+0x020) /* busmaster enable, NMI, 
etc*/
 #define CSR_GP_CNTRL            (CSR_BASE+0x024)
+
+/*
+ * Hardware revision info
+ * Bit fields:
+ * 31-8:  Reserved
+ *  7-4:  Type of device:  0x0 = 4965, 0xd = 3945
+ *  3-2:  Revision step:  0 = A, 1 = B, 2 = C, 3 = D
+ *  1-0:  "Dash" value, as in A-1, etc.
+ *
+ * NOTE:  Revision step affects calculation of CCK txpower for 4965.
+ */
 #define CSR_HW_REV              (CSR_BASE+0x028)
+
+/* EEPROM reads */
 #define CSR_EEPROM_REG          (CSR_BASE+0x02c)
 #define CSR_EEPROM_GP           (CSR_BASE+0x030)
 #define CSR_GP_UCODE           (CSR_BASE+0x044)
@@ -452,10 +470,13 @@ struct iwl4965_eeprom {
 #define CSR_UCODE_DRV_GP1_SET   (CSR_BASE+0x058)
 #define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
 #define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
-#define CSR_LED_REG            (CSR_BASE+0x094)
-#define CSR_DRAM_INT_TBL_CTL   (CSR_BASE+0x0A0)
 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
-#define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
+
+/*
+ * Indicates hardware rev, to determine CCK backoff for txpower calculation.
+ * Bit fields:
+ *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
+ */
 #define CSR_HW_REV_WA_REG      (CSR_BASE+0x22C)
 
 /* HW I/F configuration */
@@ -554,44 +575,47 @@ struct iwl4965_eeprom {
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)
 
-/* CSR_ANA_PLL_CFG */
-#define CSR_ANA_PLL_CFG_SH             (0x00880300)
-
-#define CSR_LED_REG_TRUN_ON            (0x00000078)
-#define CSR_LED_REG_TRUN_OFF           (0x00000038)
-#define CSR_LED_BSM_CTRL_MSK           (0xFFFFFFDF)
-
-/* DRAM_INT_TBL_CTRL */
-#define CSR_DRAM_INT_TBL_CTRL_EN       (1<<31)
-#define CSR_DRAM_INT_TBL_CTRL_WRAP_CHK (1<<27)
-
 /*=== HBUS (Host-side Bus) ===*/
 #define HBUS_BASE      (0x400)
 
+/*
+ * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
+ * structures, error log, event log, verifying uCode load).
+ * First write to address register, then read from or write to data register
+ * to complete the job.  Once the address register is set up, accesses to
+ * data registers auto-increment the address by one dword.
+ * Bit usage for address registers (read or write):
+ *  0-31:  memory address within device
+ */
 #define HBUS_TARG_MEM_RADDR     (HBUS_BASE+0x00c)
 #define HBUS_TARG_MEM_WADDR     (HBUS_BASE+0x010)
 #define HBUS_TARG_MEM_WDAT      (HBUS_BASE+0x018)
 #define HBUS_TARG_MEM_RDAT      (HBUS_BASE+0x01c)
+
+/*
+ * Registers for accessing device's internal peripheral registers
+ * (e.g. SCD, BSM, etc.).  First write to address register,
+ * then read from or write to data register to complete the job.
+ * Bit usage for address registers (read or write):
+ *  0-15:  register address (offset) within device
+ * 24-25:  (# bytes - 1) to read or write (e.g. 3 for dword)
+ */
 #define HBUS_TARG_PRPH_WADDR    (HBUS_BASE+0x044)
 #define HBUS_TARG_PRPH_RADDR    (HBUS_BASE+0x048)
 #define HBUS_TARG_PRPH_WDAT     (HBUS_BASE+0x04c)
 #define HBUS_TARG_PRPH_RDAT     (HBUS_BASE+0x050)
+
+/*
+ * Per-Tx-queue write pointer (index, really!) (3945 and 4965).
+ * Indicates index to next TFD that driver will fill (1 past latest filled).
+ * Bit usage:
+ *  0-7:  queue write index (0-255)
+ * 11-8:  queue selector (0-15)
+ */
 #define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)
 
 #define HBUS_TARG_MBX_C         (HBUS_BASE+0x030)
 
-
-/* SCD (Scheduler) */
-#define SCD_BASE                        (CSR_BASE + 0x2E00)
-
-#define SCD_MODE_REG                    (SCD_BASE + 0x000)
-#define SCD_ARASTAT_REG                 (SCD_BASE + 0x004)
-#define SCD_TXFACT_REG                  (SCD_BASE + 0x010)
-#define SCD_TXF4MF_REG                  (SCD_BASE + 0x014)
-#define SCD_TXF5MF_REG                  (SCD_BASE + 0x020)
-#define SCD_SBYP_MODE_1_REG             (SCD_BASE + 0x02C)
-#define SCD_SBYP_MODE_2_REG             (SCD_BASE + 0x030)
-
 /*=== FH (data Flow Handler) ===*/
 #define FH_BASE     (0x800)
 
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to