Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dc0d5c1e5c7532e800fff6e313cd4af44af99976
Commit:     dc0d5c1e5c7532e800fff6e313cd4af44af99976
Parent:     d4a8d46d9129fbb26b4c2d3143b1b0975a9b4ae4
Author:     Joe Perches <[EMAIL PROTECTED]>
AuthorDate: Mon Dec 17 11:40:18 2007 -0800
Committer:  Greg Kroah-Hartman <[EMAIL PROTECTED]>
CommitDate: Fri Feb 1 14:34:57 2008 -0800

    USB: Spelling fixes
    
    Signed-off-by: Joe Perches <[EMAIL PROTECTED]>
    Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
 drivers/usb/atm/ueagle-atm.c        |    2 +-
 drivers/usb/class/cdc-acm.c         |    2 +-
 drivers/usb/gadget/at91_udc.h       |    2 +-
 drivers/usb/gadget/fsl_usb2_udc.c   |    2 +-
 drivers/usb/gadget/omap_udc.c       |    2 +-
 drivers/usb/host/ehci-fsl.c         |    2 +-
 drivers/usb/host/ehci-sched.c       |    2 +-
 drivers/usb/host/r8a66597.h         |    2 +-
 drivers/usb/misc/sisusbvga/sisusb.c |    2 +-
 drivers/usb/misc/usbtest.c          |    2 +-
 drivers/usb/serial/io_edgeport.c    |    8 ++++----
 drivers/usb/serial/mos7840.c        |    8 ++++----
 12 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index fad5d91..c5ec1a5 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -999,7 +999,7 @@ static void __uea_load_page_e4(struct uea_softc *sc, u8 
pageno, int boot)
                bi.dwAddress = swab32(blockidx->PageAddress);
 
                uea_dbg(INS_TO_USBDEV(sc),
-                      "sending block %u for DSP page %u size %u adress %x\n",
+                      "sending block %u for DSP page %u size %u address %x\n",
                       blockno, pageno, blocksize, 
le32_to_cpu(blockidx->PageAddress));
 
                /* send block info through the IDMA pipe */
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b0f9873..bcc4213 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -915,7 +915,7 @@ next_desc:
        }
        
        if (data_interface_num != call_interface_num)
-               dev_dbg(&intf->dev,"Seperate call control interface. That is 
not fully supported.\n");
+               dev_dbg(&intf->dev,"Separate call control interface. That is 
not fully supported.\n");
 
 skip_normal_probe:
 
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index aecc722..f3095a9 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -53,7 +53,7 @@
 #define     AT91_UDP_RXRSM     (1 <<  9)       /* USB Resume Interrupt Status 
*/
 #define     AT91_UDP_EXTRSM    (1 << 10)       /* External Resume Interrupt 
Status [AT91RM9200 only] */
 #define     AT91_UDP_SOFINT    (1 << 11)       /* Start of Frame Interrupt 
Status */
-#define     AT91_UDP_ENDBUSRES (1 << 12)       /* End of Bus Reset Interrpt 
Status */
+#define     AT91_UDP_ENDBUSRES (1 << 12)       /* End of Bus Reset Interrupt 
Status */
 #define     AT91_UDP_WAKEUP    (1 << 13)       /* USB Wakeup Interrupt Status 
[AT91RM9200 only] */
 
 #define AT91_UDP_ICR           0x20            /* Interrupt Clear Register */
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c 
b/drivers/usb/gadget/fsl_usb2_udc.c
index d59eb92..63e8fa3 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1896,7 +1896,7 @@ static int fsl_proc_read(char *page, char **start, off_t 
off, int count,
 
        spin_lock_irqsave(&udc->lock, flags);
 
-       /* ------basic driver infomation ---- */
+       /* ------basic driver information ---- */
        t = scnprintf(next, size,
                        DRIVER_DESC "\n"
                        "%s version: %s\n"
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 7d6bef5..e6d68bd 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1028,7 +1028,7 @@ omap_ep_queue(struct usb_ep *_ep, struct usb_request 
*_req, gfp_t gfp_flags)
 
                                /* STATUS for zero length DATA stages is
                                 * always an IN ... even for IN transfers,
-                                * a wierd case which seem to stall OMAP.
+                                * a weird case which seem to stall OMAP.
                                 */
                                UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR);
                                UDC_CTRL_REG = UDC_CLR_EP;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f35795f..adb0def 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -25,7 +25,7 @@
 
 #include "ehci-fsl.h"
 
-/* FIXME: Power Managment is un-ported so temporarily disable it */
+/* FIXME: Power Management is un-ported so temporarily disable it */
 #undef CONFIG_PM
 
 /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 80d99bc..dce305b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -211,7 +211,7 @@ static inline void carryover_tt_bandwidth(unsigned short 
tt_usecs[8])
  * low/fullspeed transfer can "carry over" from one uframe to the next,
  * since the TT just performs downstream transfers in sequence.
  *
- * For example two seperate 100 usec transfers can start in the same uframe,
+ * For example two separate 100 usec transfers can start in the same uframe,
  * and the second one would "carry over" 75 usecs into the next uframe.
  */
 static void
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index fe9ceb0..5738825 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -405,7 +405,7 @@
 
 struct r8a66597_pipe_info {
        u16 pipenum;
-       u16 address;    /* R8A66597 HCD usb addres */
+       u16 address;    /* R8A66597 HCD usb address */
        u16 epnum;
        u16 maxpacket;
        u16 type;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c 
b/drivers/usb/misc/sisusbvga/sisusb.c
index 8832a72..cb7fa0e 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -323,7 +323,7 @@ sisusb_bulkin_msg(struct sisusb_usb_data *sisusb, unsigned 
int pipe, void *data,
                        usb_kill_urb(urb);
                        retval = -ETIMEDOUT;
                } else {
-                       /* URB completed within timout */
+                       /* URB completed within timeout */
                        retval = urb->status;
                        readbytes = urb->actual_length;
                }
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index f1b886c..da922df 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1312,7 +1312,7 @@ static int ctrl_out (struct usbtest_dev *dev,
                len += vary;
 
                /* [real world] the "zero bytes IN" case isn't really used.
-                * hardware can easily trip up in this wierd case, since its
+                * hardware can easily trip up in this weird case, since its
                 * status stage is IN, not OUT like other ep0in transfers.
                 */
                if (len > length)
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index a5d2e11..3428ccc 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -959,7 +959,7 @@ static int edge_open (struct usb_serial_port *port, struct 
file * filp)
  *
  *     This function will block the close until one of the following:
  *             1. Response to our Chase comes from Edgeport
- *             2. A timout of 10 seconds without activity has expired
+ *             2. A timeout of 10 seconds without activity has expired
  *                (1K of Edgeport data @ 2400 baud ==> 4 sec to empty)
  *
  ************************************************************************/
@@ -999,7 +999,7 @@ static void block_until_chase_response(struct edgeport_port 
*edge_port)
                                return;
                        }
                } else {
-                       // Reset timout value back to 10 seconds
+                       // Reset timeout value back to 10 seconds
                        dbg("%s - Last %d, Current %d", __FUNCTION__, 
lastCredits, edge_port->txCredits);
                        loop = 10;
                }
@@ -1014,7 +1014,7 @@ static void block_until_chase_response(struct 
edgeport_port *edge_port)
  *     This function will block the close until one of the following:
  *             1. TX count are 0
  *             2. The edgeport has stopped
- *             3. A timout of 3 seconds without activity has expired
+ *             3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
 static void block_until_tx_empty (struct edgeport_port *edge_port)
@@ -1050,7 +1050,7 @@ static void block_until_tx_empty (struct edgeport_port 
*edge_port)
                                return;
                        }
                } else {
-                       // Reset timout value back to seconds
+                       // Reset timeout value back to seconds
                        loop = 30;
                }
        }
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c29c912..869ecd3 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1133,7 +1133,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port 
*port)
  *     This function will block the close until one of the following:
  *             1. TX count are 0
  *             2. The mos7840 has stopped
- *             3. A timout of 3 seconds without activity has expired
+ *             3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
 static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
@@ -1161,7 +1161,7 @@ static void mos7840_block_until_tx_empty(struct 
moschip_port *mos7840_port)
                        dbg("%s - TIMEOUT", __FUNCTION__);
                        return;
                } else {
-                       /* Reset timout value back to seconds */
+                       /* Reset timeout value back to seconds */
                        wait = 30;
                }
        }
@@ -1275,7 +1275,7 @@ static void mos7840_close(struct usb_serial_port *port, 
struct file *filp)
  *
  *     This function will block the close until one of the following:
  *             1. Response to our Chase comes from mos7840
- *             2. A timout of 10 seconds without activity has expired
+ *             2. A timeout of 10 seconds without activity has expired
  *                (1K of mos7840 data @ 2400 baud ==> 4 sec to empty)
  *
  ************************************************************************/
@@ -1304,7 +1304,7 @@ static void mos7840_block_until_chase_response(struct 
moschip_port
                        dbg("%s - TIMEOUT", __FUNCTION__);
                        return;
                } else {
-                       /* Reset timout value back to seconds */
+                       /* Reset timeout value back to seconds */
                        wait = 10;
                }
        }
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to