Gitweb:     
http://git.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ff11d0780376a3821d790a6ceb8b297d976b14fe
Commit:     ff11d0780376a3821d790a6ceb8b297d976b14fe
Parent:     789c7048bfaa4901860b4c86606c2651fc2298f4
Author:     Maciej W. Rozycki <[EMAIL PROTECTED]>
AuthorDate: Thu Feb 7 00:15:14 2008 -0800
Committer:  Linus Torvalds <[EMAIL PROTECTED]>
CommitDate: Thu Feb 7 08:42:24 2008 -0800

    dz: clean up and improve the setup of termios settings
    
    A set of changes to the way termios settings are propagated to the serial
    port hardware.  The DZ11 only supports a selection of fixed baud settings,
    so some requests may not be fulfilled.  Keep the old setting in such a case
    and failing that resort to 9600bps.  Also add a missing update of the
    transmit timeout.  And remove the explicit encoding of the line selected
    from writes to the Line Parameters Register as it has been preencoded by
    the ->set_termios() call already.  Finally, remove a duplicate macro for
    the Receiver Enable bit.
    
    Signed-off-by: Maciej W. Rozycki <[EMAIL PROTECTED]>
    Cc: Ralf Baechle <[EMAIL PROTECTED]>
    Cc: Alan Cox <[EMAIL PROTECTED]>
    Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
    Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
---
 drivers/serial/dz.c |  103 ++++++++++++++++++++++++++------------------------
 drivers/serial/dz.h |    4 +-
 2 files changed, 56 insertions(+), 51 deletions(-)

diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index ae3203b..765b700 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -128,8 +128,8 @@ static void dz_stop_rx(struct uart_port *uport)
 {
        struct dz_port *dport = (struct dz_port *)uport;
 
-       dport->cflag &= ~DZ_CREAD;
-       dz_out(dport, DZ_LPR, dport->cflag | dport->port.line);
+       dport->cflag &= ~DZ_RXENAB;
+       dz_out(dport, DZ_LPR, dport->cflag);
 }
 
 static void dz_enable_ms(struct uart_port *port)
@@ -464,12 +464,51 @@ static void dz_break_ctl(struct uart_port *uport, int 
break_state)
        spin_unlock_irqrestore(&uport->lock, flags);
 }
 
+static int dz_encode_baud_rate(unsigned int baud)
+{
+       switch (baud) {
+       case 50:
+               return DZ_B50;
+       case 75:
+               return DZ_B75;
+       case 110:
+               return DZ_B110;
+       case 134:
+               return DZ_B134;
+       case 150:
+               return DZ_B150;
+       case 300:
+               return DZ_B300;
+       case 600:
+               return DZ_B600;
+       case 1200:
+               return DZ_B1200;
+       case 1800:
+               return DZ_B1800;
+       case 2000:
+               return DZ_B2000;
+       case 2400:
+               return DZ_B2400;
+       case 3600:
+               return DZ_B3600;
+       case 4800:
+               return DZ_B4800;
+       case 7200:
+               return DZ_B7200;
+       case 9600:
+               return DZ_B9600;
+       default:
+               return -1;
+       }
+}
+
 static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
                           struct ktermios *old_termios)
 {
        struct dz_port *dport = (struct dz_port *)uport;
        unsigned long flags;
        unsigned int cflag, baud;
+       int bflag;
 
        cflag = dport->port.line;
 
@@ -496,60 +535,26 @@ static void dz_set_termios(struct uart_port *uport, 
struct ktermios *termios,
                cflag |= DZ_PARODD;
 
        baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600);
-       switch (baud) {
-       case 50:
-               cflag |= DZ_B50;
-               break;
-       case 75:
-               cflag |= DZ_B75;
-               break;
-       case 110:
-               cflag |= DZ_B110;
-               break;
-       case 134:
-               cflag |= DZ_B134;
-               break;
-       case 150:
-               cflag |= DZ_B150;
-               break;
-       case 300:
-               cflag |= DZ_B300;
-               break;
-       case 600:
-               cflag |= DZ_B600;
-               break;
-       case 1200:
-               cflag |= DZ_B1200;
-               break;
-       case 1800:
-               cflag |= DZ_B1800;
-               break;
-       case 2000:
-               cflag |= DZ_B2000;
-               break;
-       case 2400:
-               cflag |= DZ_B2400;
-               break;
-       case 3600:
-               cflag |= DZ_B3600;
-               break;
-       case 4800:
-               cflag |= DZ_B4800;
-               break;
-       case 7200:
-               cflag |= DZ_B7200;
-               break;
-       case 9600:
-       default:
-               cflag |= DZ_B9600;
+       bflag = dz_encode_baud_rate(baud);
+       if (bflag < 0)  {                       /* Try to keep unchanged.  */
+               baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600);
+               bflag = dz_encode_baud_rate(baud);
+               if (bflag < 0)  {               /* Resort to 9600.  */
+                       baud = 9600;
+                       bflag = DZ_B9600;
+               }
+               tty_termios_encode_baud_rate(termios, baud, baud);
        }
+       cflag |= bflag;
 
        if (termios->c_cflag & CREAD)
                cflag |= DZ_RXENAB;
 
        spin_lock_irqsave(&dport->port.lock, flags);
 
-       dz_out(dport, DZ_LPR, cflag | dport->port.line);
+       uart_update_timeout(uport, termios->c_cflag, baud);
+
+       dz_out(dport, DZ_LPR, cflag);
        dport->cflag = cflag;
 
        /* setup accept flag */
diff --git a/drivers/serial/dz.h b/drivers/serial/dz.h
index 1e836c3..faf169e 100644
--- a/drivers/serial/dz.h
+++ b/drivers/serial/dz.h
@@ -109,8 +109,8 @@
 #define DZ_B7200         0x0D00
 #define DZ_B9600         0x0E00
 
-#define DZ_CREAD         0x1000               /* Enable receiver */
-#define DZ_RXENAB        0x1000               /* enable receive char */
+#define DZ_RXENAB        0x1000               /* Receiver Enable */
+
 /*
  * Addresses for the DZ registers
  */
-
To unsubscribe from this list: send the line "unsubscribe git-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to