Signed-off-by: Elijah Newren <new...@gmail.com>
---
t/t6043-merge-rename-directories.sh | 336 ++++++++++++++++++++++++++++++++++++
1 file changed, 336 insertions(+)
diff --git a/t/t6043-merge-rename-directories.sh
b/t/t6043-merge-rename-directories.sh
index f9d75c83c..dc3fc66e5 100755
--- a/t/t6043-merge-rename-directories.sh
+++ b/t/t6043-merge-rename-directories.sh
@@ -1172,4 +1172,340 @@ test_expect_failure '5d-check: Directory/file/file
conflict due to directory ren
# back to old handling. But, sadly, see testcases 8a and 8b.
###########################################################################
+
+###########################################################################
+# SECTION 6: Same side of the merge was the one that did the rename
+#
+# It may sound obvious that you only want to apply implicit directory
+# renames to directories if the _other_ side of history did the renaming.
+# If you did make an implementation that didn't explicitly enforce this
+# rule, the majority of cases that would fall under this section would
+# also be solved by following the rules from the above sections. But
+# there are still a few that stick out, so this section covers them just
+# to make sure we also get them right.
+###########################################################################
+
+# Testcase 6a, Tricky rename/delete
+# Commit O: z/{b,c,d}
+# Commit A: z/b
+# Commit B: y/{b,c}, z/d
+# Expected: y/b, CONFLICT(rename/delete, z/c -> y/c vs. NULL)
+# Note: We're just checking here that the rename of z/b and z/c to put
+# them under y/ doesn't accidentally catch z/d and make it look like
+# it is also involved in a rename/delete conflict.
+
+test_expect_success '6a-setup: Tricky rename/delete' '
+ test_create_repo 6a &&
+ (
+ cd 6a &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ echo d >z/d &&
+ git add z &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ git rm z/c &&
+ git rm z/d &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git checkout B &&
+ mkdir y &&
+ git mv z/b y/ &&
+ git mv z/c y/ &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_success '6a-check: Tricky rename/delete' '
+ (
+ cd 6a &&
+
+ git checkout A^0 &&
+
+ test_must_fail git merge -s recursive B^0 >out &&
+ test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out &&
+
+ git ls-files -s >out &&
+ test_line_count = 2 out &&
+ git ls-files -u >out &&
+ test_line_count = 1 out &&
+ git ls-files -o >out &&
+ test_line_count = 1 out &&
+
+ git rev-parse >actual \
+ :0:y/b :3:y/c &&
+ git rev-parse >expect \
+ O:z/b O:z/c &&
+ test_cmp expect actual
+ )
+'
+
+# Testcase 6b, Same rename done on both sides
+# (Related to testcases 6c and 8e)
+# Commit O: z/{b,c}
+# Commit A: y/{b,c}
+# Commit B: y/{b,c}, z/d
+# Expected: y/{b,c}, z/d
+# Note: If we did directory rename detection here, we'd move z/d into y/,
+# but B did that rename and still decided to put the file into z/,
+# so we probably shouldn't apply directory rename detection for it.
+
+test_expect_success '6b-setup: Same rename done on both sides' '
+ test_create_repo 6b &&
+ (
+ cd 6b &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ git add z &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ git mv z y &&
+ test_tick &&
+ git commit -m "A" &&
+
+ git checkout B &&
+ git mv z y &&
+ mkdir z &&
+ echo d >z/d &&
+ git add z/d &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_success '6b-check: Same rename done on both sides' '
+ (
+ cd 6b &&
+
+ git checkout A^0 &&
+
+ git merge -s recursive B^0 &&
+
+ git ls-files -s >out &&
+ test_line_count = 3 out &&
+ git ls-files -u >out &&
+ test_line_count = 0 out &&
+ git ls-files -o >out &&
+ test_line_count = 1 out &&
+
+ git rev-parse >actual \
+ HEAD:y/b HEAD:y/c HEAD:z/d &&
+ git rev-parse >expect \
+ O:z/b O:z/c B:z/d &&
+ test_cmp expect actual
+ )
+'
+
+# Testcase 6c, Rename only done on same side
+# (Related to testcases 6b and 8e)
+# Commit O: z/{b,c}
+# Commit A: z/{b,c} (no change)
+# Commit B: y/{b,c}, z/d
+# Expected: y/{b,c}, z/d
+# NOTE: Seems obvious, but just checking that the implementation doesn't
+# "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6c-setup: Rename only done on same side' '
+ test_create_repo 6c &&
+ (
+ cd 6c &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ git add z &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ test_tick &&
+ git commit --allow-empty -m "A" &&
+
+ git checkout B &&
+ git mv z y &&
+ mkdir z &&
+ echo d >z/d &&
+ git add z/d &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_success '6c-check: Rename only done on same side' '
+ (
+ cd 6c &&
+
+ git checkout A^0 &&
+
+ git merge -s recursive B^0 &&
+
+ git ls-files -s >out &&
+ test_line_count = 3 out &&
+ git ls-files -u >out &&
+ test_line_count = 0 out &&
+ git ls-files -o >out &&
+ test_line_count = 1 out &&
+
+ git rev-parse >actual \
+ HEAD:y/b HEAD:y/c HEAD:z/d &&
+ git rev-parse >expect \
+ O:z/b O:z/c B:z/d &&
+ test_cmp expect actual
+ )
+'
+
+# Testcase 6d, We don't always want transitive renaming
+# (Related to testcase 1c)
+# Commit O: z/{b,c}, x/d
+# Commit A: z/{b,c}, x/d (no change)
+# Commit B: y/{b,c}, z/d
+# Expected: y/{b,c}, z/d
+# NOTE: Again, this seems obvious but just checking that the implementation
+# doesn't "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6d-setup: We do not always want transitive renaming' '
+ test_create_repo 6d &&
+ (
+ cd 6d &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ mkdir x &&
+ echo d >x/d &&
+ git add z x &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ test_tick &&
+ git commit --allow-empty -m "A" &&
+
+ git checkout B &&
+ git mv z y &&
+ git mv x z &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_success '6d-check: We do not always want transitive renaming' '
+ (
+ cd 6d &&
+
+ git checkout A^0 &&
+
+ git merge -s recursive B^0 &&
+
+ git ls-files -s >out &&
+ test_line_count = 3 out &&
+ git ls-files -u >out &&
+ test_line_count = 0 out &&
+ git ls-files -o >out &&
+ test_line_count = 1 out &&
+
+ git rev-parse >actual \
+ HEAD:y/b HEAD:y/c HEAD:z/d &&
+ git rev-parse >expect \
+ O:z/b O:z/c O:x/d &&
+ test_cmp expect actual
+ )
+'
+
+# Testcase 6e, Add/add from one-side
+# Commit O: z/{b,c}
+# Commit A: z/{b,c} (no change)
+# Commit B: y/{b,c,d_1}, z/d_2
+# Expected: y/{b,c,d_1}, z/d_2
+# NOTE: Again, this seems obvious but just checking that the implementation
+# doesn't "accidentally detect a rename" and give us y/{b,c} +
+# add/add conflict on y/d_1 vs y/d_2.
+
+test_expect_success '6e-setup: Add/add from one side' '
+ test_create_repo 6e &&
+ (
+ cd 6e &&
+
+ mkdir z &&
+ echo b >z/b &&
+ echo c >z/c &&
+ git add z &&
+ test_tick &&
+ git commit -m "O" &&
+
+ git branch O &&
+ git branch A &&
+ git branch B &&
+
+ git checkout A &&
+ test_tick &&
+ git commit --allow-empty -m "A" &&
+
+ git checkout B &&
+ git mv z y &&
+ echo d1 > y/d &&
+ mkdir z &&
+ echo d2 > z/d &&
+ git add y/d z/d &&
+ test_tick &&
+ git commit -m "B"
+ )
+'
+
+test_expect_success '6e-check: Add/add from one side' '
+ (
+ cd 6e &&
+
+ git checkout A^0 &&
+
+ git merge -s recursive B^0 &&
+
+ git ls-files -s >out &&
+ test_line_count = 4 out &&
+ git ls-files -u >out &&
+ test_line_count = 0 out &&
+ git ls-files -o >out &&
+ test_line_count = 1 out &&
+
+ git rev-parse >actual \
+ HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/d &&
+ git rev-parse >expect \
+ O:z/b O:z/c B:y/d B:z/d &&
+ test_cmp expect actual
+ )
+'
+
+###########################################################################
+# Rules suggested by section 6:
+#
+# Only apply implicit directory renames to directories if the other
+# side of history is the one doing the renaming.
+###########################################################################
+
test_done
--
2.14.2
