But you still didn't answer my question. Can you do a telnet to your
FQDN port 80 from the server itself?
Also, the client host should be set to localhost instead of FQDN,
although it would work too when correctly configured.
Tip: take a look if you have an entry in /etc/hosts pointing to your
FQDN unless you are using some well configured DHCP+DNS server. For
instance, try this on your Gitorious server:
nslookup your.fqdn.gitorious.servername
What is the output of this command?
Em 06-06-2011 20:07, Areva escreveu:
They are set to the FQDN as is the ServerName in the httpd.conf.
I just rebuilt the server and tried again, still have the same problem
with same error.
Thanks for the response.
On Jun 6, 2:14 pm, Rodrigo Rosenfeld Rosas<[email protected]> wrote:
Take a look if you can access the hosts in gitorious.yml, in port 80,
from your Gitorious server.
What are the hosts configured in your gitorious.yml?
Em 06-06-2011 18:00, Areva escreveu:
Still wondering and search for help with this. Have changed keys, etc,
etc, etc.
When I look at the gitorious_auth.log it has the following:
I, [2011-06-06 20:54:28#28875] INFO -- : Connection from
"192.168.171.78 56046 22" (wmgeorge): git-receive-pack 'git-
documentation/git-documentation.git'
F, [2011-06-06 20:54:49#28875] FATAL -- : Errno::ETIMEDOUT Connection
timed out - connect(2): /usr/local/lib/ruby/1.8/net/http.rb:560:in
`initialize
No idea about this.
HELP !!!!
Thanks
On May 31, 2:43 pm, Areva<[email protected]> wrote:
I have successfully set up a gitorious server and can push,
create ,etc when everything is set up for hostname
gitorious.localdomain. Now when I set this server pointing toward the
internet and use FQDN I can not push to it , I get a fatal error. Now
I assume this is a security or credential things but I have racked my
brain for hours trying different things and can not narrow this down.
I have looked over most of this group, but nothing really answers
this. Any help would be greatly appreciated.
Just to be clear original install had everything set to
gitorious.localdomain on port 80 in the yml file and the apache2
gitorious file. These are the only changes I made for the FQDN which I
hope was right. Maybe something I am missing.
Thanks in advance for help.
--
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
