As you mentioned, they're *Chinese* frames.  It could also be a
localized thing...most Chinese are of smaller stature than
Europeans/Americans.  The smaller sizes could be a better proportion
for smaller people?

I'm relatively short (5'8") for a Texan, but am fairly average for an
American.  By many Oriental standards, I'd be considered quite tall.

     -- Chuck Knight



On Mon, Mar 29, 2010 at 2:42 AM, garyinla <[email protected]> wrote:
> It seems to me, after checking out a lot of eyeglass frames at local
> stores and also online, looking at the measurements, that the chinese
> noname eyeglass frames generally (not always) are shorter than 30mm in
> height.    On the other hand, many (not all) branded, designer frames
> are larger in height, with many between 30 and 35mm and some larger,
> some going over 40mm in height.
>
> As most of us know, progressive lenses require a certain height, and
> if you do a search on the online store websites for progressive
> capable frames, these will be the larger of the frames sold on the
> website.
>
> But even so, it seems to me that there's a clear trend where these
> chinese noname frames are much shorter in height on average in general
> than name brand, designer frames, and also than most vintage frames.
>
> Some of this could be fashion trends, but i feel that there also may
> be a factor where the chinese producers want to keep costs down by
> using less materials on frames and lenses by mostly offering short
> height frames.
>
> To people new to these online stores they may be surprised when they
> get their ordered glasses and see how short they look on their face,
> not realizing how the measurements translate into how the frames look
> in person on their faces.
>
> It seems to me that of the online stores, the 39dollarglasses.com
> website seems to offer frames that are somewhat larger in height more
> than zennioptical.com and some of the other more popular websites.  I
> read somewhere that 39dollar was reviewed somewhere as having frames
> that fit better than some of the other websites.
>
> I wonder if keeping the frame heights down below 30mm allow the
> chinese producers to use shorter blanks for lenses, or even if they
> can cut the standard blanks in half and use half a standard size lens
> for each frame lens.  This is just my speculation but i suspect
> there's some profit/cost incentive going on to keep most of the frame
> heights very low.
>
> One thing Ive noticed for example is that a standard large aviator
> frame in the US is generally 58mm in lens width, with a lens height
> somewhere in the area of 50mm.  If you look on the websites selling
> the chinese noname eyeglass frames, it is very rare to see any aviator
> style sold in excess of 54mm lens width, with a height greater than
> 35mm.   Same situation is true about Wayfarer type frames.   The real
> Wayfarer and other similar frames from branded manufacturers sold in
> the US have lens heights in excess of 40mm generally, roughly but on
> the chinese noname versions they generally never exceed approximately
> 35mm in height.
>
> I am just pointing this out for consideration and discussion.  I dont
> like it.  I dont like the fact that the options for the larger sized
> frames are much less with the chinese noname producers than with name
> brand manufacturers.
>
>
>
>
> --
> Check us out at the oft-updated http://glassyeyes.blogspot.com!
>
> You received this message because you are subscribed to the Google Groups 
> "GlassyEyes" group.
> To post to this group, send email to [email protected]
> To unsubscribe from this group, send email to 
> [email protected]
> For more options, visit this group at 
> http://groups.google.com/group/glassyeyes?hl=en
>
> To unsubscribe, reply using "remove me" as the subject.
>

-- 
Check us out at the oft-updated http://glassyeyes.blogspot.com!

You received this message because you are subscribed to the Google Groups 
"GlassyEyes" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/glassyeyes?hl=en

Reply via email to