No veo ningún error, solo que no has creado el arreglo en la tarjeta controladora.
Aquí está la tarjeta > 01:00.0 RAID bus controller: LSI Logic / Symbios Logic LSI MegaSAS 9260 (rev > 03) Aquí está el controlador > megaraid_sas 41593 0 Y aquí se levanta la tarjeta, si te fijas exporta los 2 discos duros. Crea el arreglo, lee con detenimiento los mensajes cuando arranca el servidor, ahí verás cuando dice "Press Ctrl + R to enter to the RAID configuration utility" (o algo así). > <6>megasas: 00.00.04.17-RH1 Wed. Nov. 25, 11:41:51 PST 2009 > <6>megasas: 0x1000:0x0079:0x1014:0x03b2: bus 1:slot 0:func 0 > <6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201 > <7>PCI: Setting latency timer of device 0000:01:00.0 to 64 > <6>megasas: FW now in Ready state > <6>scsi0 : LSI SAS based MegaRAID driver > <5> Vendor: ATA Model: ST9500530NS Rev: BE16 > <5> Type: Direct-Access ANSI SCSI revision: 05 > <5> Vendor: ATA Model: ST9500530NS Rev: BE16 > <5> Type: Direct-Access ANSI SCSI revision: 05 -- Rodolfo
