I see that ram type are only EDO, DDR, SDRAM, SDRAM-2.
I think that are missing at least:
+ ``Normal'' (non edo, non fpm, non ECC)
+ FPM
+ ECC/Registered (but this is an attribute, there's out there EDO ECC
and non EDO ECC...)
+ DIMM
+ SODIMM
+ RAMBUS
Also, AFAIK DIMM and DDR are both SDRAM, so i've not really understood
the classification, i suppose.
I think that a better classification would be:
+ at the name field, the ``form factor'': SIMM 30pin, SIMM 72pin,
DIMM, SODIMM, DDR, RAMBUS, ...
+ at the type, the ``subtype'': Normal, EDO, FPM, ECC, Registered,
SDRAM, ...
(with the same note, ECC are an attribute of EDO and SDRAM at
least...)
+ at the speed/freq the real ones (60ns, PC133, PC2700, ...)
I've not clear another thing. We keep the RAM as example.
If on a computer i add two RAM type, eg:
Desc: DIMM type: SDRAM freq: PC100
Desc: DIMM type: SDRAM freq: PC133
and on computer view i add some RAM, i can choose from two entries DIMM
that seems equal.
I have to ``overload'' the description as:
Desc: DIMM PC100 type: SDRAM freq: PC100
Desc: DIMM PC133 type: SDRAM freq: PC133
this are intended? I'm missing something?
Many thanks.
--
dott. Marco Gaiarin GNUPG Key ID: 240A3D66
Associazione ``La Nostra Famiglia'' http://www.sv.lnf.it/
Polo FVG - Via della Bontà , 7 - 33078 - San Vito al Tagliamento (PN)
gaio(at)sv.lnf.it tel +39-0434-842711 fax +39-0434-842797
Per favore, aiutate gli Stati Uniti a salvarsi dai brevetti sul
software, salvando innanzitutto voi stessi.
http://punto-informatico.it/p.asp?i=52786&p=2
