----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Scott, I'll try to keep this short. Yes there are a number of ways to fix this without pulling the tank. Best results are as follows. Completely drain the header tank... Leave the cap off for a few days to let any excess fuel evaporate. Buy yourself some Miracle paint from JCWhitney's on-line catalog. The black works the best as it's a little thicker than the clear. OK, now for the hard part. Crawl under the dash.... Lightly sand the rivet heads and an area about 1 inch in diameter around each rivet. Wipe clean with tack cloth and a little rubbing alcohol. Then apply as many coats of the miracle paint as you care to apply. I'd put at least 4 coats on and 6 or 8 would be even better. This will stop the leaking rivets. If they start leaking again in 4 or 5 years. Remove the old glue using a chemical paint stripper and repeat the process. This will work on your wing tanks too. In the mean time save up your money and have your tanks rebuilt.
Bill W. DuCharme ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
