----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 07:30 PM 1/30/02 -0500, you wrote:
>Just completed installing new donuts on the main gear.
>
>Anyway, The Coupe has the spacers, above the donuts, to raise the tail
up.
>Do I leave these on or take them off?
>
>(BTW - Single fork nose gear).
For the single fork, or any other nose gear, Jack.
You set the tail so it is 72 inches off Level Ground. Actually, there
is probably
an angle to use. But that figure is the norm. The idea is to have the
`coupe
assume a specific angle when rolling on the ground. It kills lift on
roll-out,
just like Fred W. designed.
Percy in Portland
==^================================================================
This email was sent to: [EMAIL PROTECTED]
EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT
Or send an email to: [EMAIL PROTECTED]
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
<<attachment: winmail.dat>>
