----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Hey Dennis! Since the cowling holes seem to be worn out, you may want to consider the repair piece from Skyport. Lee sells a piece that already has the dzus mounted. You just have to rivet the piece in place, it is about 5 inches wide and replaces all four bottom dzus on the side cowl. If your problem is the dzus on the front cowling, you will have to make and rivet patches behind the worn out holes. I have machined a tool out of a bolt that works fine to set the new retainers. However, there is a washer and spring retainer that you can use that does not require the tool, as long as the hole is not completely worn out. I have used both methods, and either will work fine. Lynn Nelsen N67HS 52FL ==^================================================================
This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
