----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi Dennis I use a 7/8 deep on most all , That one left front lower had to make a blue wrench ,Nose bowl suport gets in the way .Oh dont forget the antiseez.Plug torques 300-360 inch lbs or 25 ft lbs. Good luck Joe W --- Dennis Spiegel <[EMAIL PROTECTED]> wrote: > ----[Please read http://ercoupers.com/disclaimer.htm > before following any advice in this forum.]---- > > > Hello all coupers,, I had the first time EVER a > funky run up Rt Mag drop > was nearly 200 and rough.lft was normal .I suspect > either a speck of > carbon or lead on a plug .I cleared it with a full > powwer static > runup.What size wrench is the one we would use and > is it deep socket > too..I'm gunna pull the plugs and inspect em > anyway.Mag is fine. I hope all > of you are having a MARVELOUS summer it's been fun > so far.. > Dennis 99564 in ill BTW----- Greg did you learn > those tunes yet? ds > > > > The information contained in this message may be > CONFIDENTIAL and is for the intended addressee only. > Any unauthorized use, dissemination of the > information, or copying of this message is > prohibited. If you are not the intended addressee, > please notify the sender immediately and delete this > message. > > > > > > ================================================================== > TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm > > > __________________________________________________ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com ================================================================== TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
