On 01/28/2016 02:59 PM, baul jianguo wrote:
http://pastebin.centos.org/38941/
client statedump,only the pid 27419,168030,208655 hang，you can search
this pid in the statedump file。
Could you take one more statedump please?
Pranith
On Wed, Jan 27, 2016 at 4:35 PM, Pranith Kumar Karampuri
<pkara...@redhat.com> wrote:
Hi,
If the hang appears on enabling client side io-threads then it could
be because of some race that is seen when io-threads is enabled on the
client side. 2 things will help us debug this issue:
1) thread apply all bt inside gdb (with debuginfo rpms/debs installed )
2) Complete statedump of the mount at two intervals preferably 10 seconds
apart. It becomes difficult to find out which ones are stuck vs the ones
that are on-going when we have just one statedump. If we have two, we can
find which frames are common in both of the statedumps and then take a
closer look there.
Feel free to ping me on #gluster-dev, nick: pranithk if you have the process
hung in that state and you guys don't mind me do a live debugging with you
guys. This option is the best of the lot!
Thanks a lot baul, Oleksandr for the debugging so far!
Pranith
On 01/25/2016 01:03 PM, baul jianguo wrote:
3.5.7 also hangs.only the flush op hung. Yes,off the
performance.client-io-threads ,no hang.
The hang does not relate the client kernel version.
One client statdump about flush op,any abnormal?
[global.callpool.stack.12]
uid=0
gid=0
pid=14432
unique=16336007098
lk-owner=77cb199aa36f3641
op=FLUSH
type=1
cnt=6
[global.callpool.stack.12.frame.1]
ref_count=1
translator=fuse
complete=0
[global.callpool.stack.12.frame.2]
ref_count=0
translator=datavolume-write-behind
complete=0
parent=datavolume-read-ahead
wind_from=ra_flush
wind_to=FIRST_CHILD (this)->fops->flush
unwind_to=ra_flush_cbk
[global.callpool.stack.12.frame.3]
ref_count=1
translator=datavolume-read-ahead
complete=0
parent=datavolume-open-behind
wind_from=default_flush_resume
wind_to=FIRST_CHILD(this)->fops->flush
unwind_to=default_flush_cbk
[global.callpool.stack.12.frame.4]
ref_count=1
translator=datavolume-open-behind
complete=0
parent=datavolume-io-threads
wind_from=iot_flush_wrapper
wind_to=FIRST_CHILD(this)->fops->flush
unwind_to=iot_flush_cbk
[global.callpool.stack.12.frame.5]
ref_count=1
translator=datavolume-io-threads
complete=0
parent=datavolume
wind_from=io_stats_flush
wind_to=FIRST_CHILD(this)->fops->flush
unwind_to=io_stats_flush_cbk
[global.callpool.stack.12.frame.6]
ref_count=1
translator=datavolume
complete=0
parent=fuse
wind_from=fuse_flush_resume
wind_to=xl->fops->flush
unwind_to=fuse_err_cbk
On Sun, Jan 24, 2016 at 5:35 AM, Oleksandr Natalenko
<oleksa...@natalenko.name> wrote:
With "performance.client-io-threads" set to "off" no hangs occurred in 3
rsync/rm rounds. Could that be some fuse-bridge lock race? Will bring
that
option to "on" back again and try to get full statedump.
On четвер, 21 січня 2016 р. 14:54:47 EET Raghavendra G wrote:
On Thu, Jan 21, 2016 at 10:49 AM, Pranith Kumar Karampuri <
pkara...@redhat.com> wrote:
On 01/18/2016 02:28 PM, Oleksandr Natalenko wrote:
XFS. Server side works OK, I'm able to mount volume again. Brick is
30%
full.
Oleksandr,
Will it be possible to get the statedump of the client, bricks
output next time it happens?
https://github.com/gluster/glusterfs/blob/master/doc/debugging/statedump.m
d#how-to-generate-statedump
We also need to dump inode information. To do that you've to add
"all=yes"
to /var/run/gluster/glusterdump.options before you issue commands to get
statedump.
Pranith
On понеділок, 18 січня 2016 р. 15:07:18 EET baul jianguo wrote:
What is your brick file system? and the glusterfsd process and all
thread status?
I met same issue when client app such as rsync stay in D status,and
the brick process and relate thread also be in the D status.
And the brick dev disk util is 100% .
On Sun, Jan 17, 2016 at 6:13 AM, Oleksandr Natalenko
<oleksa...@natalenko.name> wrote:
Wrong assumption, rsync hung again.
On субота, 16 січня 2016 р. 22:53:04 EET Oleksandr Natalenko wrote:
One possible reason:
cluster.lookup-optimize: on
cluster.readdir-optimize: on
I've disabled both optimizations, and at least as of now rsync
still
does
its job with no issues. I would like to find out what option causes
such
a
behavior and why. Will test more.
On пʼятниця, 15 січня 2016 р. 16:09:51 EET Oleksandr Natalenko
wrote:
Another observation: if rsyncing is resumed after hang, rsync
itself
hangs a lot faster because it does stat of already copied files.
So,
the
reason may be not writing itself, but massive stat on GlusterFS
volume
as well.
15.01.2016 09:40, Oleksandr Natalenko написав:
While doing rsync over millions of files from ordinary partition
to
GlusterFS volume, just after approx. first 2 million rsync hang
happens, and the following info appears in dmesg:
===
[17075038.924481] INFO: task rsync:10310 blocked for more than
120
seconds.
[17075038.931948] "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[17075038.940748] rsync D ffff88207fc13680 0 10310
10309 0x00000080
[17075038.940752] ffff8809c578be18 0000000000000086
ffff8809c578bfd8
0000000000013680
[17075038.940756] ffff8809c578bfd8 0000000000013680
ffff880310cbe660
ffff881159d16a30
[17075038.940759] ffff881e3aa25800 ffff8809c578be48
ffff881159d16b10
ffff88087d553980
[17075038.940762] Call Trace:
[17075038.940770] [<ffffffff8160a1d9>] schedule+0x29/0x70
[17075038.940797] [<ffffffffa023a53d>]
__fuse_request_send+0x13d/0x2c0
[fuse]
[17075038.940801] [<ffffffffa023db30>] ?
fuse_get_req_nofail_nopages+0xc0/0x1e0 [fuse]
[17075038.940805] [<ffffffff81098350>] ? wake_up_bit+0x30/0x30
[17075038.940809] [<ffffffffa023a6d2>]
fuse_request_send+0x12/0x20
[fuse]
[17075038.940813] [<ffffffffa024382f>] fuse_flush+0xff/0x150
[fuse]
[17075038.940817] [<ffffffff811c45c4>] filp_close+0x34/0x80
[17075038.940821] [<ffffffff811e4ed8>] __close_fd+0x78/0xa0
[17075038.940824] [<ffffffff811c6103>] SyS_close+0x23/0x50
[17075038.940828] [<ffffffff81614de9>]
system_call_fastpath+0x16/0x1b
===
rsync blocks in D state, and to kill it, I have to do umount
--lazy
on
GlusterFS mountpoint, and then kill corresponding client
glusterfs
process. Then rsync exits.
Here is GlusterFS volume info:
===
Volume Name: asterisk_records
Type: Distributed-Replicate
Volume ID: dc1fe561-fa3a-4f2e-8330-ec7e52c75ba4
Status: Started
Number of Bricks: 3 x 2 = 6
Transport-type: tcp
Bricks:
Brick1:
server1:/bricks/10_megaraid_0_3_9_x_0_4_3_hdd_r1_nolvm_hdd_storage_0
1
/as
te
risk/records Brick2:
server2:/bricks/10_megaraid_8_5_14_x_8_6_16_hdd_r1_nolvm_hdd_storage
_
01/
as
terisk/records Brick3:
server1:/bricks/11_megaraid_0_5_4_x_0_6_5_hdd_r1_nolvm_hdd_storage_0
2
/as
te
risk/records Brick4:
server2:/bricks/11_megaraid_8_7_15_x_8_8_20_hdd_r1_nolvm_hdd_storage
_
02/
as
terisk/records Brick5:
server1:/bricks/12_megaraid_0_7_6_x_0_13_14_hdd_r1_nolvm_hdd_storage
_
03/
as
terisk/records Brick6:
server2:/bricks/12_megaraid_8_9_19_x_8_13_24_hdd_r1_nolvm_hdd_storag
e
_03
/a
sterisk/records Options Reconfigured:
cluster.lookup-optimize: on
cluster.readdir-optimize: on
client.event-threads: 2
network.inode-lru-limit: 4096
server.event-threads: 4
performance.client-io-threads: on
storage.linux-aio: on
performance.write-behind-window-size: 4194304
performance.stat-prefetch: on
performance.quick-read: on
performance.read-ahead: on
performance.flush-behind: on
performance.write-behind: on
performance.io-thread-count: 2
performance.cache-max-file-size: 1048576
performance.cache-size: 33554432
features.cache-invalidation: on
performance.readdir-ahead: on
===
The issue reproduces each time I rsync such an amount of files.
How could I debug this issue better?
_______________________________________________
Gluster-users mailing list
gluster-us...@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-devel mailing list
Gluster-devel@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-devel
_______________________________________________
Gluster-devel mailing list
Gluster-devel@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-devel
_______________________________________________
Gluster-devel mailing list
Gluster-devel@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-devel
_______________________________________________
Gluster-users mailing list
gluster-us...@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-devel mailing list
Gluster-devel@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-devel
_______________________________________________
Gluster-devel mailing list
Gluster-devel@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-devel
