Hi, Gluster Expert,
Sorry for wrong code "open(argv[1], O_CREAT|O_RDWR|S_IRUSR|S_IWUSR) "in
previous mail, after correct it , the issues seems GONE.
But I still confuse why wrong code not failed in EXT4 file system.
After I check tcpdump packet via network, it show that in CREATE process, the
mode of file sometime became to " Mode: 0101000, S_ISVTX, Reserved ", with this
mode, the file could be seen with "ls" command, but can't seen by
"hexdump"command even with root privilege, but if run this wrong program in
ext4 file system, this MODE can't be occurred.
So I suggest maybe Gluster could do some inprovment for this MODE , so that can
avoid thiss can't access file with wrong API called.
@Sami,
After I check the manual of open API, the correct format should be
int open(const char *pathname, int flags);
int open(const char *pathname, int flags, mode_t mode);
for your test code, I suppose the correct call should be "open(argv[1],
O_CREAT|O_RDWR,S_IRUSR|S_IWUSR) "
after I correct it , c and C++ code all PASS in 3.6 and 3.12.
Best Regards,
George
From: Lian, George (NSB - CN/Hangzhou)
Sent: Wednesday, December 27, 2017 5:23 PM
To: [email protected]
Cc: Zhong, Hua (NSB - CN/Hangzhou) <[email protected]>; Venetjoki, Sami
(Nokia - FI/Espoo) <[email protected]>; Li, Deqian (NSB - CN/Hangzhou)
<[email protected]>
Subject: Sometimes read failed just after write before file closed when try 100
times in different new files
Hi, Gluster expert,
I has just raise a bug with https://bugzilla.redhat.com/show_bug.cgi?id=1529237
on gluster community.
I also attached the reproduce source code and shell script here FYI.
>From my investigation , I suppose the issue maybe caused by "cache in client
>is invalid but the file still not been persistented in server brick"
But I can't find the root cause from the debug log which attached in
https://bugzilla.redhat.com/show_bug.cgi?id=1529237.
>From the following log I abstract client log from the attachment in the
>Bugzilla, I highlight it with YELLOW which in read phase, you can see both
>volume(test-client-0 and test-client-1) are failed
I just suppose it maybe some abnormal when it in read phase, but I can't any
usefully log in server brick log from myself, so your helps is highly
appreciated!
[2017-12-27 06:21:04.332524] T [MSGID: 0] [afr-inode-read.c:286:afr_fstat_cbk]
12-stack-trace: stack-address: 0x7fb5ec010680, test-replicate-0 returned 0
[2017-12-27 06:21:04.332724] T [MSGID: 0] [syncop.c:1715:syncop_fgetxattr]
12-stack-trace: stack-address: 0x7fb5fc0618d0, winding from test-dht to
test-replicate-0
[2017-12-27 06:21:04.332768] D [MSGID: 0] [afr-read-txn.c:220:afr_read_txn]
12-test-replicate-0: 70e0f7ee-2f0a-4364-a38e-96e7031eee7b: generation now vs
cached: 2, 2
[2017-12-27 06:21:04.332791] T [MSGID: 0]
[afr-inode-read.c:1728:afr_fgetxattr_wind] 12-stack-trace: stack-address:
0x7fb5fc0618d0, winding from test-replicate-0 to test-client-0
[2017-12-27 06:21:04.332817] T [rpc-clnt.c:1496:rpc_clnt_record]
12-test-client-0: Auth Info: pid: 5257, uid: 0, gid: 0, owner: 0000000000000000
[2017-12-27 06:21:04.332837] T [rpc-clnt.c:1353:rpc_clnt_record_build_header]
12-rpc-clnt: Request fraglen 140, payload: 64, rpc hdr: 76
[2017-12-27 06:21:04.332862] T [rpc-clnt.c:1699:rpc_clnt_submit] 12-rpc-clnt:
submitted request (XID: 0x2681 Program: GlusterFS 3.3, ProgVers: 330, Proc: 35)
to rpc-transport (test-client-0)
[2017-12-27 06:21:04.333943] T [rpc-clnt.c:675:rpc_clnt_reply_init]
12-test-client-0: received rpc message (RPC XID: 0x2681 Program: GlusterFS 3.3,
ProgVers: 330, Proc: 35) from rpc-transport (test-client-0)
[2017-12-27 06:21:04.334013] D [MSGID: 0]
[client-rpc-fops.c:1143:client3_3_fgetxattr_cbk] 12-test-client-0: remote
operation failed: No data available
[2017-12-27 06:21:04.334036] D [MSGID: 0]
[client-rpc-fops.c:1151:client3_3_fgetxattr_cbk] 12-stack-trace: stack-address:
0x7fb5fc0618d0, test-client-0 returned -1 error: No data available [No data
available]
[2017-12-27 06:21:04.334114] T [MSGID: 0]
[afr-common.c:1306:afr_inode_refresh_subvol_with_fstat] 12-stack-trace:
stack-address: 0x7fb5fc0618d0, winding from test-replicate-0 to test-client-0
[2017-12-27 06:21:04.334174] T [rpc-clnt.c:1496:rpc_clnt_record]
12-test-client-0: Auth Info: pid: 5257, uid: 0, gid: 0, owner: 0000000000000000
[2017-12-27 06:21:04.334196] T [rpc-clnt.c:1353:rpc_clnt_record_build_header]
12-rpc-clnt: Request fraglen 336, payload: 260, rpc hdr: 76
[2017-12-27 06:21:04.334229] T [rpc-clnt.c:1699:rpc_clnt_submit] 12-rpc-clnt:
submitted request (XID: 0x2682 Program: GlusterFS 3.3, ProgVers: 330, Proc: 25)
to rpc-transport (test-client-0)
[2017-12-27 06:21:04.334280] T [MSGID: 0]
[afr-common.c:1306:afr_inode_refresh_subvol_with_fstat] 12-stack-trace:
stack-address: 0x7fb5fc0618d0, winding from test-replicate-0 to test-client-1
[2017-12-27 06:21:04.334311] T [rpc-clnt.c:1496:rpc_clnt_record]
12-test-client-1: Auth Info: pid: 5257, uid: 0, gid: 0, owner: 0000000000000000
[2017-12-27 06:21:04.334330] T [rpc-clnt.c:1353:rpc_clnt_record_build_header]
12-rpc-clnt: Request fraglen 336, payload: 260, rpc hdr: 76
[2017-12-27 06:21:04.334354] T [rpc-clnt.c:1699:rpc_clnt_submit] 12-rpc-clnt:
submitted request (XID: 0x252c Program: GlusterFS 3.3, ProgVers: 330, Proc: 25)
to rpc-transport (test-client-1)
[2017-12-27 06:21:04.334904] T [rpc-clnt.c:675:rpc_clnt_reply_init]
12-test-client-1: received rpc message (RPC XID: 0x252c Program: GlusterFS 3.3,
ProgVers: 330, Proc: 25) from rpc-transport (test-client-1)
[2017-12-27 06:21:04.334983] T [MSGID: 0]
[client-rpc-fops.c:1462:client3_3_fstat_cbk] 12-stack-trace: stack-address:
0x7fb5fc0618d0, test-client-1 returned 0
[2017-12-27 06:21:04.335128] T [rpc-clnt.c:675:rpc_clnt_reply_init]
12-test-client-0: received rpc message (RPC XID: 0x2682 Program: GlusterFS 3.3,
ProgVers: 330, Proc: 25) from rpc-transport (test-client-0)
[2017-12-27 06:21:04.335165] T [MSGID: 0]
[client-rpc-fops.c:1462:client3_3_fstat_cbk] 12-stack-trace: stack-address:
0x7fb5fc0618d0, test-client-0 returned 0
[2017-12-27 06:21:04.335193] T [MSGID: 0]
[afr-inode-read.c:1728:afr_fgetxattr_wind] 12-stack-trace: stack-address:
0x7fb5fc0618d0, winding from test-replicate-0 to test-client-1
[2017-12-27 06:21:04.335224] T [rpc-clnt.c:1496:rpc_clnt_record]
12-test-client-1: Auth Info: pid: 5257, uid: 0, gid: 0, owner: 0000000000000000
[2017-12-27 06:21:04.335253] T [rpc-clnt.c:1353:rpc_clnt_record_build_header]
12-rpc-clnt: Request fraglen 140, payload: 64, rpc hdr: 76
[2017-12-27 06:21:04.335284] T [rpc-clnt.c:1699:rpc_clnt_submit] 12-rpc-clnt:
submitted request (XID: 0x252d Program: GlusterFS 3.3, ProgVers: 330, Proc: 35)
to rpc-transport (test-client-1)
[2017-12-27 06:21:04.335870] T [rpc-clnt.c:675:rpc_clnt_reply_init]
12-test-client-1: received rpc message (RPC XID: 0x252d Program: GlusterFS 3.3,
ProgVers: 330, Proc: 35) from rpc-transport (test-client-1)
[2017-12-27 06:21:04.335902] D [MSGID: 0]
[client-rpc-fops.c:1143:client3_3_fgetxattr_cbk] 12-test-client-1: remote
operation failed: No data available
[2017-12-27 06:21:04.335922] D [MSGID: 0]
[client-rpc-fops.c:1151:client3_3_fgetxattr_cbk] 12-stack-trace: stack-address:
0x7fb5fc0618d0, test-client-1 returned -1 error: No data available [No data
available]
[2017-12-27 06:21:04.335950] D [MSGID: 0]
[afr-inode-read.c:1720:afr_fgetxattr_wind] 12-stack-trace: stack-address:
0x7fb5fc0618d0, test-replicate-0 returned -1 error: No data available [No data
available]
Best Regards,
George
_______________________________________________
Gluster-devel mailing list
[email protected]
http://lists.gluster.org/mailman/listinfo/gluster-devel
