I've actually worked through this problem, but I'm having a new problem
which is causing confusion.
I've got an initrd that boots and can mount gluster and afr/unify
volumes. The problem is the disk performance is very very slow.
When I boot the box normally it is fine but there's something that's
causing the connection to lag badly. There are no errors in the client
log but even a simple ls takes minutes.
I'm using the latest fuse, tla build, readahead, writebehind, and
io-cache translators etc etc. Is there anything you can think of that
would cause io to hang for minutes before it starts?
Thanks!
-Mickey Mazarick
Anand Avati wrote:
Everything looks correct but when I mount the filesystem I get the
error:
[fuse-bridge.c:431fuse_entry_cbk] glusterfs-fuse:11
the log message you posted is incomplete. the complete log message
will help a lot. also what is the output of
sh# stat /mnt/glusterfs
(if possible before you pivot root into glusterfs)
avati
--
_______________________________________________
Gluster-devel mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/gluster-devel
