Hello, my config is very standard, see at this end of this email. With 2.0 branche ( configuration file with same translator) , glusterfs is working. With 3.0.x ( 3.0.0 / 3.0.1 ) glusterfs is not working correctly : When I boot system ( 2 servers in replicate mode) , all is ok, as soon I desactivate network card of glusterfs server ( eth1 ) , my two servers reboot between 2 and 5 minutes !! Log logs nothing as server reboot, i'm trying with kernel from 2.6.32 -> 2.6.33 : same things If i running just glusterfs server, without client, nothing reboot. I suspect a fuse module bad usage with gluster
Regards, NP volume 10.98.98.1 type protocol/client option transport-type tcp/client option remote-host 10.98.98.1 option transport.socket.nodelay on option remote-subvolume brick end-volume volume 10.98.98.10 type protocol/client option transport-type tcp/client option remote-host 10.98.98.10 option transport.socket.nodelay on option remote-subvolume brick end-volume # ------------- Create Brick Replicate definition volume last0 type cluster/replicate subvolumes 10.98.98.1 10.98.98.10 end-volume # ------------- Create Distribute definition volume last type cluster/distribute subvolumes last0 end-volume volume iothreads type performance/io-threads option thread-count 8 subvolumes last end-volume volume io-cache type performance/io-cache option cache-size 2GB # default is 32MB option cache-timeout 5 # default is 1 subvolumes iothreads end-volume volume writebehind type performance/write-behind option cache-size 4MB subvolumes io-cache end-volume cat /etc/glusterfs/glusterfs-server.vol volume brickless type storage/posix option directory /mnt/disks/export end-volume volume brickthread type features/locks subvolumes brickless end-volume volume brickcache type performance/io-cache option cache-size 2GB # default is 32MB option cache-timeout 2 # default is 1 subvolumes brickthread end-volume volume brick type performance/io-threads option thread-count 8 subvolumes brickcache end-volume volume server type protocol/server subvolumes brick option client-volume-filename /etc/glusterfs/Gglusterfs-client.vol option transport-type tcp option transport.socket.nodelay on option verify-volfile-checksum no option auth.addr.brick.allow 10.98.98.* end-volume
_______________________________________________ Gluster-devel mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/gluster-devel
