Yes you can declare multiple server sections on the same server volume spec file (one for each interface). It is also possible to use "ha" translator on the client side to fail over to 1GigE if 10GigE fails.
Look for the bind option. -------------------------------------------------------------------------- ### 10GigE Server Configuration volume server type protocol/server option transport-type tcp/server # For TCP/IP transport transport.socket.bind-address 192.168.10.11 # Your 10GigE Server1 subvolumes brick1 brick2 option auth.addr.brick1.allow 192.168.* # Allow access to "brick1" volume option auth.addr.brick2.allow 192.168.* # Allow access to "brick2" volume end-volume ### 1GigE Server Configuration volume server type protocol/server option transport-type tcp/server # For TCP/IP transport transport.socket.bind-address 192.168.1.11 # Your 1GigE Server1 subvolumes brick1 brick2 option auth.addr.brick1.allow 192.168.* # Allow access to "brick1" volume option auth.addr.brick2.allow 192.168.* # Allow access to "brick2" volume end-volume -------------------------------------------------------------------------- -- Anand Babu Periasamy GPG Key ID: 0x62E15A31 Blog [http://ab.multics.org] GlusterFS [http://www.gluster.org] The GNU Operating System [http://www.gnu.org] Johnson, Glenn wrote:
I have the glusterfs server processes running on machines that have a 10GB network (via Myri-10G cards). There is also a 1GB interface in each machine that is used for clients to connect to. Is it possible to set up glusterfs to use both the 10GB interfaces and the 1GB interfaces in the glusterfs server machines? Thanks. _______________________________________________ Gluster-users mailing list [email protected] http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
_______________________________________________ Gluster-users mailing list [email protected] http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
