Maybe you should make some io test with iometer for get it What kind of raid configurtion will you have on each physcal server ? radi 5 or raid 6 or raid10 ?
Also whak kind of application will you use , you know DHT is file based and maybe using it for mysql or mssql couldn't make you happy but maybe stripe translator make you happy İf your files are big maybe jumbo frames could help you better for getting much throughput Also ram is important you know if you have too much ram and if you are making read more then write it can help too -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Julien Cornuwel Sent: Monday, June 01, 2009 9:31 PM To: [email protected] Subject: Re: [Gluster-users] Configuration validation needed My test servers were not available today, so I had to test my design on virtual machines :-/ All I can tell is : it works (after correcting minor errors in the config file). But I have no idea what performances I can expect on real servers... Le lundi 01 juin 2009 à 02:35 +0200, Julien Cornuwel a écrit : > I asked because I cannot perform tests until tomorrow and I wanted to be > sure. I'll keep you posted about the result... > > Le dimanche 31 mai 2009 à 15:15 +0300, Vahriç Muhtaryan a écrit : > > I'm new to glusterfs but looks like your config file is okay. > > Why don't you execute your conf and test it ;) go ahead. > > İf something wrong glusterfs or glusterfsd will kick you ;) > > > > Pls keep informed , its work or not ! I can simulate same environment on my > > servers. > > > > Regards > > Vahric > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Julien Cornuwel > > Sent: Sunday, May 31, 2009 2:55 PM > > To: [email protected] > > Subject: [Gluster-users] Configuration validation needed > > > > Hi, > > > > > > I will soon have to deploy a glusterFS across several servers. Here are my > > goals : > > > > - Every server can access the all filesystem > > - Every file must be replicated > > > > I used a combination of Replicate and Distribute to be able to add new > > servers. > > > > Each server storage is divided in two bricks (primary and secondary). > > First server's primary storage is replicated on second server's secondary. > > Second server's primary is replicated on third servers secondary and so on. > > > > And then, I use Distribute across these replicated volumes. I think this > > should work, but could you please review the attached configuration file > > for errors ? > > > > > > Regards, > > > > > _______________________________________________ > Gluster-users mailing list > [email protected] > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users _______________________________________________ Gluster-users mailing list [email protected] http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users _______________________________________________ Gluster-users mailing list [email protected] http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
