Just some experiments with 3.0.2. Using Gluster doc instruction source
compiles fine to 32 bit
binaries/libraries (64 bit x86 server).
Performance issues when Server is 64 bit x86 osol-0906 /ZFS fs and
single gigabit e1000 nics.
1 server. + 1 Linux client works at wire speed (> 100Mbytes/s). Good.
1 server + 2 Linux clients or more the performance drops to near zero
(20Mbytes/s). Bad.
Raw disk speed on server is about 500Mbyte/s on local disk.
Using network mode iozone .
I notice that using 2 clients the network bandwidth of each client
struggles at about 10Mbytes/s.
With a single client is it as expected (112 Mbytes/s).
Anyone had experience with this ?
Possibly a question for OSOL people ?
Nick
This e-mail message may contain confidential and/or privileged information. If
you are not an addressee or otherwise authorized to receive this message, you
should not use, copy, disclose or take any action based on this e-mail or any
information contained in the message.
If you have received this material in error, please advise the sender
immediately by reply e-mail and delete this message. Thank you.
Streamline Computing is a trading division of Concurrent Thinking Limited:
Registered in England and Wales No: 03913912
Registered Address: The Innovation Centre, Warwick Technology Park, Gallows
Hill, Warwick, CV34 6UW, United Kingdom
_______________________________________________
Gluster-users mailing list
[email protected]
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
