I have a simple setup: gluster> volume info
Volume Name: myvolume Type: Distributed-Replicate Status: Started Number of Bricks: 3 x 2 = 6 Transport-type: tcp Bricks: Brick1: 10.2.218.188:/srv Brick2: 10.116.245.136:/srv Brick3: 10.206.38.103:/srv Brick4: 10.114.41.53:/srv Brick5: 10.68.73.41:/srv Brick6: 10.204.129.91:/srv I *killed* Brick #4 (kill -9 and then shut down instance). My intention is to simulate a catastrophic failure of Brick4 and replace it with a new server. I probed the new server, then ran the following command: gluster> peer probe 10.76.242.97 Probe successful gluster> volume replace-brick myvolume 10.114.41.53:/srv 10.76.242.97:/srv start replace-brick started successfully I waited a little while, saw no traffic on the new server and then ran this: gluster> volume replace-brick myvolume 10.114.41.53:/srv 10.76.242.97:/srv status It never returned. Now my cluster is in some weird state. It's still serving files, I still have a job copying files to it, but I am unable to replace the bad peer with a new one. root@ip-10-2-218-188:~# gluster volume replace-brick myvolume 10.114.41.53:/srv 10.76.242.97:/srv status replace-brick status unknown root@ip-10-2-218-188:~# gluster volume replace-brick myvolume 10.114.41.53:/srv 10.76.242.97:/srv abort replace-brick abort failed root@ip-10-2-218-188:~# gluster volume replace-brick myvolume 10.114.41.53:/srv 10.76.242.97:/srv start replace-brick failed to start How can I get my cluster back into a clean working state? Thanks, Bryan
_______________________________________________ Gluster-users mailing list [email protected] http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
