thanks for the advice. Those modules were not autoloaded, but could be 
loaded manually.

I now have this profile:
------------------------------------
$ lsmod |egrep '(ib|rdma)'
ib_umad                12363  0 
ib_ucm                 12496  0 
rdma_ucm               11779  0 
ib_uverbs              31902  2 ib_ucm,rdma_ucm
rdma_cm                31030  1 rdma_ucm
ib_cm                  40316  2 ib_ucm,rdma_cm
iw_cm                   9385  1 rdma_cm
ib_sa                  22006  2 rdma_cm,ib_cm
ib_addr                 6766  1 rdma_cm
zlib_deflate           21834  1 btrfs
libcrc32c               1244  1 btrfs
ib_mthca              140934  0 
ib_mad                 41321  4 ib_umad,ib_cm,ib_sa,ib_mthca
ib_core                64935  10 
ib_umad,ib_ucm,rdma_ucm,ib_uverbs,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mthca,ib_mad
------------------------------------

and semi-magically, on one of the nodes, ibv_devinfo reports:

------------------------------------
root@pbs3:~
661 $ ibv_devinfo
hca_id: mthca0
        transport:                      InfiniBand (0)
        fw_ver:                         1.0.800
        node_guid:                      0006:6a00:9800:6e55
        sys_image_guid:                 0006:6a00:9800:6e55
        vendor_id:                      0x066a
        vendor_part_id:                 25204
        hw_ver:                         0xA0
        board_id:                       MT_0230000002
        phys_port_cnt:                  1
                port:   1
                        state:                  PORT_INIT (2)
                        max_mtu:                2048 (4)
                        active_mtu:             512 (2)
                        sm_lid:                 0
                        port_lid:               0
                        port_lmc:               0x00
------------------------------------

However, 2 other nodes are still mute - there's obviously some kind of 
software drift between them, but this gives me some purchase to figure 
other things out.

Still haven't upgraded the firmware, but this allows me to extract the 
PSID and get the right FW image.

Thanks!
Harry



On Monday 07 November 2011 06:44:06 Ben England wrote:
> To Harry Mangalam about Gluster/RDMA:
> 
> make sure these modules are loaded
> 
> # modprobe -v rdma_ucm
> # modprobe -v ib_uverbs
> # modprobe -v ib_ucm
> 
> To run the subnet manager
> 
> # modprobe -v ib_umad
> 
> Make sure libibverbs and (libmlx4 or libmthca) RPMs are installed.
> 
> I don't understand why they appropriate modules aren't loaded
> automatically.  Could put something in /etc/modprobe.d/ to make
> this happen maybe?  Infiniband should not require troubleshooting
> after 5-10 years of development, it should just work.
> _______________________________________________
> Gluster-users mailing list
> [email protected]
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users

-- 
Harry Mangalam - Research Computing, OIT, Rm 225 MSTB, UC Irvine
[ZOT 2225] / 92697  Google Voice Multiplexer: (949) 478-4487 
MSTB Lat/Long: (33.642025,-117.844414) (paste into Google Maps)
--
This signature has been OCCUPIED!
_______________________________________________
Gluster-users mailing list
[email protected]
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users

Reply via email to