Good afternoon, I am playing around with GlusterFS 3.1 in CentOS 6 virtual machines to see if I can get of proof of concept for a bigger project. In my setup, I have 4 GlusterFS servers with two bricks each of 10GB with XFS (per your quick-start guide). So, I have a total of 8 bricks. When bu
I have no problem with distributed-replicated volumes. However, when I set up a striped replicated volume and mounted it via the native client, I had problems with file operations. My striped-replicated volume had 8 bricks. I set it up with 4 stripes and 2 replicas. I made sure that no bricks on the same server were in pairs next to each other. The volume created fine and started fine. "gluster volume info" and "gluster volume status" showed no problems. The volume mounted fine. I tried to run "dd if=/dev/zero..." to a new file on the volume, and it would fail every time. However, when I would "touch" the file to create it first, dd would work fine afterwards. The same was true with creating a text file with nano. First, the save of a new file would fail, then when re-tried, it would succeed. The errors I would see in the client log are: [2012-10-21 19:41:18.974559] E [stripe-helpers.c:268:stripe_ctx_handle] 0-dsr-vol-stripe-0: Failed to get stripe-size [2012-10-21 19:41:18.975471] W [fuse-bridge.c:2025:fuse_writev_cbk] 0-glusterfs-fuse: 11545: WRITE => -1 (Invalid argument) Please advise. Thanks, Michael ______________________________________________________________________________________ Michael Kushnir System Architect / Engineer Communications Engineering Branch Lister Hill National Center for Biomedical Communications National Library of Medicine 8600 Rockville Pike, Building 38A, Floor 10 Besthesda, MD 20894 Phone: 301-435-3219 Email: [email protected]<mailto:[email protected]> [cid:[email protected]]
<<inline: image001.jpg>>
_______________________________________________ Gluster-users mailing list [email protected] http://supercolony.gluster.org/mailman/listinfo/gluster-users
