Hello again! I am complete rebuild my storage. As base: ext4 over mdadm-raid1 Gluster volume in distributed-replicated mode with settings:
Options Reconfigured: performance.cache-size: 1024MB nfs.disable: on performance.write-behind-window-size: 4MB performance.io-thread-count: 64 features.quota: off features.quota-timeout: 1800 performance.io-cache: on performance.write-behind: on performance.flush-behind: on performance.read-ahead: on As result, I got write performance about 80MB/s on dd if=/dev/zero of=testfile.bin bs=100M count=10, but I also got some strange things. If I try to execute above command inside virtual machine (KVM), first time all going right - about 900MB/s (cache effect, I think), but if I run this test again on existing file - task (dd) hungs up and can be stopped only by Ctrl+C. Overall virtual system latency is poor too. For example, apt-get upgrade upgrading system very, very slow, freezing on "Unpacking replacement" and other io-related steps. Does glusterfs have any tuning options, that can help me? 2013/2/27 Brian Candler <[email protected]> > On Wed, Feb 27, 2013 at 02:46:28PM +0000, Robert van Leeuwen wrote: > > You could try to trunk the network on your client but 10Gbit ethernet ( > i suggest to use fiber, because of latency issues with copper 10Gbit) > > Aside: 10G with SFP+ direct-attach cables also works well, even though it's > copper. The latency problem is with 10Gbase-T (RJ45 / CAT6(a)) > _______________________________________________ > Gluster-users mailing list > [email protected] > http://supercolony.gluster.org/mailman/listinfo/gluster-users > -- With best regards, differentlocal (www.differentlocal.ru | [email protected]), System administrator.
_______________________________________________ Gluster-users mailing list [email protected] http://supercolony.gluster.org/mailman/listinfo/gluster-users
