On 3/19/2014 7:17 AM, [email protected] wrote:
Hi,
One of my bricks suffered from complete raid failure, (3 disks on raid6). I
created a new raid, and wanted to bring the brick back up in the volume.
Did the following
1. Removed it with
gluster volume remove-brick gluster s1:/mnt/raid6 start
gluster volume remove-brick gluster s1:/mnt/raid6 commit
2. Detached with
gluster peer detach s1
3. Probed anew:
gluster peer probe s1
4. Tried to add with
gluster volume add-brick gluster s1:/mnt/raid6
But last one fails with
Stage failed on operation 'Volume Add brick'
I'm using 3.4.2.
Thanks,
/jon
WARNING: I'm not even sure if this is true, or if I changed something else,
but I give you my experience to try.
I was having trouble adding an additional brick to my replica array, and I
was getting the same (or a similar) message. I then tried adding the brick
from the command line on the machine where the brick is located. All of the
sudden I began to get meaningful error messages. As far as I know, the only
thing I changed was which computer I sshed into, but it made all the
difference in the world. The error messages were quite specific, and easy to
understand.
I am curious if others have experienced the same thing.
Ted Miller
Elkhart, IN, USA
_______________________________________________
Gluster-users mailing list
[email protected]
http://supercolony.gluster.org/mailman/listinfo/gluster-users
