This seems like such an innocent question. I have a firewall system
controlling tunnels all over the USA. It's an HA setup with two nodes. And I
built it with Gluster 3.2 to keep all the configs and logs replicated.
It's an active/standby system and it's been in place for something like 3
years. The standby system had a catastrophic hardware failure a while ago and
it looks like it needs a new motherboard. We have a new motherboard coming in
a few days. The standby hard drive seems fine.
But now the primary system repeatedly stalls its I/Os, sometimes to directories
that aren't even part of Glusterfs. And the problem is getting worse day by
day, hour by hour. Before they barbecue me, how do I tell Gluster to
temporarily take the failed node offline while its motherboard is replaced,
then put it back in service and copy everything over to it after it's repaired?
I would rather not completely remove the brick because when the hardware is
repaired and we start it up again, I want it to join back up and have
everything replicate over to it.
So for now - what can I do on the surviving node to tell it not to try to
replicate until further notice, and then how to I tell it to go back to normal
when I get the standby system back online?
Here is an example of the stalled disk I/Os. These take 1-2 minutes or more
before giving me any output. Sometimes I/Os just hang and never return.
[root@lme-fw2 ipsec.d]# gluster help
Traceback (most recent call last):
File
"/opt/glusterfs/3.2.5/local/libexec//glusterfs/python/syncdaemon/gsyncd.py",
line 19, in <module>
import resource
File
"/opt/glusterfs/3.2.5/local/libexec/glusterfs/python/syncdaemon/resource.py",
line 11, in <module>
import tempfile
File "/usr/lib64/python2.7/tempfile.py", line 18, in <module>
"""
KeyboardInterrupt
^C
[root@lme-fw2 ipsec.d]#
[root@lme-fw2 ipsec.d]#
[root@lme-fw2 ipsec.d]#
[root@lme-fw2 ipsec.d]# gluster help
Traceback (most recent call last):
File
"/opt/glusterfs/3.2.5/local/libexec//glusterfs/python/syncdaemon/gsyncd.py",
line 19, in <module>
import resource
File
"/opt/glusterfs/3.2.5/local/libexec/glusterfs/python/syncdaemon/resource.py",
line 15, in <module>
import repce
File
"/opt/glusterfs/3.2.5/local/libexec/glusterfs/python/syncdaemon/repce.py", line
1, in <module>
import os
KeyboardInterrupt
^C
[root@lme-fw2 ipsec.d]# echo $0
-bash
[root@lme-fw2 ipsec.d]# echo $?
0
[root@lme-fw2 ipsec.d]# gluster help
Traceback (most recent call last):
File
"/opt/glusterfs/3.2.5/local/libexec//glusterfs/python/syncdaemon/gsyncd.py",
line 19, in <module>
import resource
File
"/opt/glusterfs/3.2.5/local/libexec/glusterfs/python/syncdaemon/resource.py",
line 17, in <module>
from master import GMaster
File
"/opt/glusterfs/3.2.5/local/libexec/glusterfs/python/syncdaemon/master.py",
line 1, in <module>
import os
KeyboardInterrupt
volume info [all|<VOLNAME>] - list information of all volumes
volume create <NEW-VOLNAME> [stripe <COUNT>] [replica <COUNT>] [transport
<tcp|rdma|tcp,rdma>] <NEW-BRICK> ... - create a new volume of specified type
with mentioned bricks
volume delete <VOLNAME> - delete volume specified by <VOLNAME>
volume start <VOLNAME> [force] - start volume specified by <VOLNAME>
volume stop <VOLNAME> [force] - stop volume specified by <VOLNAME>
volume add-brick <VOLNAME> <NEW-BRICK> ... - add brick to volume <VOLNAME>
volume remove-brick <VOLNAME> <BRICK> ... - remove brick from volume <VOLNAME>
volume rebalance <VOLNAME> [fix-layout|migrate-data] {start|stop|status} -
rebalance operations
volume replace-brick <VOLNAME> <BRICK> <NEW-BRICK>
{start|pause|abort|status|commit} - replace-brick operations
volume set <VOLNAME> <KEY> <VALUE> - set options for volume <VOLNAME>
volume help - display help for the volume command
volume log filename <VOLNAME> [BRICK] <PATH> - set the log file for
corresponding volume/brick
volume log locate <VOLNAME> [BRICK] - locate the log file for corresponding
volume/brick
volume log rotate <VOLNAME> [BRICK] - rotate the log file for corresponding
volume/brick
volume sync <HOSTNAME> [all|<VOLNAME>] - sync the volume information from a peer
volume reset <VOLNAME> [force] - reset all the reconfigured options
volume geo-replication [<VOLNAME>] [<SLAVE-URL>]
{start|stop|config|status|log-rotate} [options...] - Geo-sync operations
volume profile <VOLNAME> {start|info|stop} - volume profile operations
volume quota <VOLNAME> <enable|disable|limit-usage|list|remove> [path] [value]
- quota translator specific operations
volume top <VOLNAME> {[open|read|write|opendir|readdir] |[read-perf|write-perf
bs <size> count <count>]} [brick <brick>] [list-cnt <count>] - volume top
operations
peer probe <HOSTNAME> - probe peer specified by <HOSTNAME>
peer detach <HOSTNAME> - detach peer specified by <HOSTNAME>
peer status - list status of peers
peer help - Help command for peer
quit - quit
help - display command options
[root@lme-fw2 ipsec.d]#
Thanks
- Greg Scott
_______________________________________________
Gluster-users mailing list
[email protected]
http://supercolony.gluster.org/mailman/listinfo/gluster-users
