Hi Kaushal, Please find the logs here :- http://ur1.ca/iyhs5 and http://ur1.ca/iyhue
Thanks, punit On Tue, Dec 2, 2014 at 12:00 PM, Kaushal M <kshlms...@gmail.com> wrote: > Hey Punit, > Could you start Glusterd in debug mode and provide the logs here? > To start it in debug mode, append '-LDEBUG' to the ExecStart line in > the service file. > > ~kaushal > > On Mon, Dec 1, 2014 at 9:05 AM, Punit Dambiwal <hypu...@gmail.com> wrote: > > Hi, > > > > Can Any body help me on this ?? > > > > On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <hypu...@gmail.com> > wrote: > >> > >> Hi Kaushal, > >> > >> Thanks for the detailed reply....let me explain my setup first :- > >> > >> 1. Ovirt Engine > >> 2. 4* host as well as storage machine (Host and gluster combined) > >> 3. Every host has 24 bricks... > >> > >> Now whenever the host machine reboot...it can come up but can not join > the > >> cluster again and through the following error "Gluster command > [<UNKNOWN>] > >> failed on server.." > >> > >> Please check my comment in line :- > >> > >> 1. Use the same string for doing the peer probe and for the brick > address > >> during volume create/add-brick. Ideally, we suggest you use properly > >> resolvable FQDNs everywhere. If that is not possible, then use only IP > >> addresses. Try to avoid short names. > >> --------------- > >> [root@cpu05 ~]# gluster peer status > >> Number of Peers: 3 > >> > >> Hostname: cpu03.stack.com > >> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb > >> State: Peer in Cluster (Connected) > >> > >> Hostname: cpu04.stack.com > >> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0 > >> State: Peer in Cluster (Connected) > >> Other names: > >> 10.10.0.8 > >> > >> Hostname: cpu02.stack.com > >> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25 > >> State: Peer in Cluster (Connected) > >> [root@cpu05 ~]# > >> ---------------- > >> 2. During boot up, make sure to launch glusterd only after the network > is > >> up. This will allow the new peer identification mechanism to do its > >> job correctly. > >> >> I think the service itself doing the same job.... > >> > >> [root@cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service > >> [Unit] > >> Description=GlusterFS, a clustered file-system server > >> After=network.target rpcbind.service > >> Before=network-online.target > >> > >> [Service] > >> Type=forking > >> PIDFile=/var/run/glusterd.pid > >> LimitNOFILE=65536 > >> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid > >> KillMode=process > >> > >> [Install] > >> WantedBy=multi-user.target > >> [root@cpu05 ~]# > >> -------------------- > >> > >> gluster logs :- > >> > >> [2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main] > >> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1 > >> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid) > >> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management: > >> Maximum allowed open file descriptors set to 65536 > >> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management: > Using > >> /var/lib/glusterd as working directory > >> [2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create] > >> 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such > device) > >> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management: > >> Failed to initialize IB Device > >> [2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load] > >> 0-rpc-transport: 'rdma' initialization failed > >> [2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create] > >> 0-rpc-service: cannot create listener, initing the transport failed > >> [2014-11-24 09:22:22.156290] I > >> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd: > geo-replication > >> module not installed in the system > >> [2014-11-24 09:22:22.161318] I > >> [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd: > retrieved > >> op-version: 30600 > >> [2014-11-24 09:22:22.821800] I > >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] > 0-management: > >> connect returned 0 > >> [2014-11-24 09:22:22.825810] I > >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] > 0-management: > >> connect returned 0 > >> [2014-11-24 09:22:22.828705] I > >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] > 0-management: > >> connect returned 0 > >> [2014-11-24 09:22:22.828771] I [rpc-clnt.c:969:rpc_clnt_connection_init] > >> 0-management: setting frame-timeout to 600 > >> [2014-11-24 09:22:22.832670] I [rpc-clnt.c:969:rpc_clnt_connection_init] > >> 0-management: setting frame-timeout to 600 > >> [2014-11-24 09:22:22.835919] I [rpc-clnt.c:969:rpc_clnt_connection_init] > >> 0-management: setting frame-timeout to 600 > >> [2014-11-24 09:22:22.840209] E > >> [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve > >> brick failed in restore > >> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management: > >> Initialization of volume 'management' failed, review your volfile again > >> [2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init] > >> 0-management: initializing translator failed > >> [2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate] > >> 0-graph: init failed > >> [2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit] (--> > >> 0-: received signum (0), shutting down > >> > >> Thanks, > >> Punit > >> > >> > >> > >> > >> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlms...@gmail.com> wrote: > >>> > >>> Based on the logs I can guess that glusterd is being started before > >>> the network has come up and that the addresses given to bricks do not > >>> directly match the addresses used in during peer probe. > >>> > >>> The gluster_after_reboot log has the line "[2014-11-25 > >>> 06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks] > >>> 0-glusterd: resolve brick failed in restore". > >>> > >>> Brick resolution fails when glusterd cannot match the address for the > >>> brick, with one of the peers. Brick resolution happens in two phases, > >>> 1. We first try to identify the peer by performing string comparisions > >>> with the brick address and the peer addresses (The peer names will be > >>> the names/addresses that were given when the peer was probed). > >>> 2. If we don't find a match from step 1, we will then resolve all the > >>> brick address and the peer addresses into addrinfo structs, and then > >>> compare these structs to find a match. This process should generally > >>> find a match if available. This will fail only if the network is not > >>> up yet as we cannot resolve addresses. > >>> > >>> The above steps are applicable only to glusterfs versions >=3.6. They > >>> were introduced to reduce problems with peer identification, like the > >>> one you encountered > >>> > >>> Since both of the steps failed to find a match in one run, but > >>> succeeded later, we can come to the conclusion that, > >>> a) the bricks don't have the exact same string used in peer probe for > >>> their addresses as step 1 failed, and > >>> b) the network was not up in the initial run, as step 2 failed during > >>> the initial run, but passed in the second run. > >>> > >>> Please let me know if my conclusion is correct. > >>> > >>> If it is, you can solve your problem in two ways. > >>> 1. Use the same string for doing the peer probe and for the brick > >>> address during volume create/add-brick. Ideally, we suggest you use > >>> properly resolvable FQDNs everywhere. If that is not possible, then > >>> use only IP addresses. Try to avoid short names. > >>> 2. During boot up, make sure to launch glusterd only after the network > >>> is up. This will allow the new peer identification mechanism to do its > >>> job correctly. > >>> > >>> > >>> If you have already followed these steps and yet still hit the > >>> problem, then please provide more information (setup, logs, etc.). It > >>> could be much different problem that you are facing. > >>> > >>> ~kaushal > >>> > >>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <hypu...@gmail.com> > >>> wrote: > >>> > Is there any one can help on this ?? > >>> > > >>> > Thanks, > >>> > punit > >>> > > >>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <hypu...@gmail.com> > >>> > wrote: > >>> >> > >>> >> Hi, > >>> >> > >>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7 > >>> >> > >>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy > >>> >> <kmayi...@redhat.com> > >>> >> wrote: > >>> >>> > >>> >>> [+Gluster-users@gluster.org] > >>> >>> > >>> >>> "Initialization of volume 'management' failed, review your volfile > >>> >>> again", glusterd throws this error when the service is started > >>> >>> automatically > >>> >>> after the reboot. But the service is successfully started later > >>> >>> manually by > >>> >>> the user. > >>> >>> > >>> >>> can somebody from gluster-users please help on this? > >>> >>> > >>> >>> glusterfs version: 3.5.1 > >>> >>> > >>> >>> Thanks, > >>> >>> Kanagaraj > >>> >>> > >>> >>> ----- Original Message ----- > >>> >>> > From: "Punit Dambiwal" <hypu...@gmail.com> > >>> >>> > To: "Kanagaraj" <kmayi...@redhat.com> > >>> >>> > Cc: us...@ovirt.org > >>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM > >>> >>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on > >>> >>> > server... > >>> >>> > > >>> >>> > Hi Kanagraj, > >>> >>> > > >>> >>> > Please check the attached log files....i didn't find any thing > >>> >>> > special.... > >>> >>> > > >>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <kmayi...@redhat.com > > > >>> >>> > wrote: > >>> >>> > > >>> >>> > > Do you see any errors in > >>> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log > >>> >>> > > when > >>> >>> > > the > >>> >>> > > service is trying to start automatically after the reboot? > >>> >>> > > > >>> >>> > > Thanks, > >>> >>> > > Kanagaraj > >>> >>> > > > >>> >>> > > > >>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote: > >>> >>> > > > >>> >>> > > Hi Kanagaraj, > >>> >>> > > > >>> >>> > > Yes...once i will start the gluster service and then vdsmd > >>> >>> > > ...the > >>> >>> > > host > >>> >>> > > can connect to cluster...but the question is why it's not > started > >>> >>> > > even it > >>> >>> > > has chkconfig enabled... > >>> >>> > > > >>> >>> > > I have tested it in two host cluster environment...(Centos 6.6 > >>> >>> > > and > >>> >>> > > centos 7.0) on both hypervisior cluster..it's failed to > reconnect > >>> >>> > > in > >>> >>> > > to > >>> >>> > > cluster after reboot.... > >>> >>> > > > >>> >>> > > In both the environment glusterd enabled for next boot....but > >>> >>> > > it's > >>> >>> > > failed with the same error....seems it's bug in either gluster > or > >>> >>> > > Ovirt ?? > >>> >>> > > > >>> >>> > > Please help me to find the workaround here if can not resolve > >>> >>> > > it...as > >>> >>> > > without this the Host machine can not connect after > >>> >>> > > reboot....that > >>> >>> > > means > >>> >>> > > engine will consider it as down and every time need to manually > >>> >>> > > start > >>> >>> > > the > >>> >>> > > gluster service and vdsmd... ?? > >>> >>> > > > >>> >>> > > Thanks, > >>> >>> > > Punit > >>> >>> > > > >>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj < > kmayi...@redhat.com> > >>> >>> > > wrote: > >>> >>> > > > >>> >>> > >> From vdsm.log "error: Connection failed. Please check if > >>> >>> > >> gluster > >>> >>> > >> daemon > >>> >>> > >> is operational." > >>> >>> > >> > >>> >>> > >> Starting glusterd service should fix this issue. 'service > >>> >>> > >> glusterd > >>> >>> > >> start' > >>> >>> > >> But i am wondering why the glusterd was not started > >>> >>> > >> automatically > >>> >>> > >> after > >>> >>> > >> the reboot. > >>> >>> > >> > >>> >>> > >> Thanks, > >>> >>> > >> Kanagaraj > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote: > >>> >>> > >> > >>> >>> > >> Hi Kanagaraj, > >>> >>> > >> > >>> >>> > >> Please find the attached VDSM logs :- > >>> >>> > >> > >>> >>> > >> ---------------- > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> > 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) > >>> >>> > >> Owner.cancelAll requests {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref) > >>> >>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting > >>> >>> > >> False > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState) > >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state > >>> >>> > >> init > >>> >>> > >> -> > >>> >>> > >> state preparing > >>> >>> > >> Thread-13::INFO::2014-11-24 > >>> >>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and > >>> >>> > >> protect: > >>> >>> > >> repoStats(options=None) > >>> >>> > >> Thread-13::INFO::2014-11-24 > >>> >>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and > >>> >>> > >> protect: > >>> >>> > >> repoStats, Return response: {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare) > >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState) > >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state > >>> >>> > >> preparing > >>> >>> > >> -> > >>> >>> > >> state finished > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> > 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) > >>> >>> > >> Owner.releaseAll requests {} resources {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> > 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) > >>> >>> > >> Owner.cancelAll requests {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref) > >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting > >>> >>> > >> False > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client > >>> >>> > >> [10.10.10.2]::call > >>> >>> > >> getCapabilities with () {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,553::utils::738::root::(execCmd) > >>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None) > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,560::utils::758::root::(execCmd) > >>> >>> > >> SUCCESS: <err> = ''; <rc> = 0 > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('gluster-swift',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('gluster-swift-object',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('gluster-swift-plugin',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('gluster-swift-account',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('gluster-swift-proxy',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('gluster-swift-doc',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('gluster-swift-container',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package > >>> >>> > >> ('glusterfs-geo-replication',) not found > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,600::caps::646::root::(get) > >>> >>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 required > >>> >>> > >> >= > >>> >>> > >> 0.10.2-31 > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return > >>> >>> > >> getCapabilities > >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info': > >>> >>> > >> {'HBAInventory': > >>> >>> > >> {'iSCSI': [{'InitiatorName': > >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}], > >>> >>> > >> 'FC': > >>> >>> > >> []}, 'packages2': {'kernel': {'release': '431.el6.x86_64', > >>> >>> > >> 'buildtime': > >>> >>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma': > >>> >>> > >> {'release': > >>> >>> > >> '1.el6', > >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, > 'glusterfs-fuse': > >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': > >>> >>> > >> '3.5.1'}, > >>> >>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime': > >>> >>> > >> 1402324637L, > >>> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release': '1.gitdb83943.el6', > >>> >>> > >> 'buildtime': > >>> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': {'release': > >>> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, 'version': > >>> >>> > >> '0.12.1.2'}, > >>> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10', 'buildtime': > >>> >>> > >> 1402435700L, > >>> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release': '29.el6_5.9', > >>> >>> > >> 'buildtime': > >>> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs': {'release': > >>> >>> > >> '1.el6', > >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom': > >>> >>> > >> {'release': > >>> >>> > >> '2.el6', > >>> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'}, > >>> >>> > >> 'glusterfs-server': > >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': > >>> >>> > >> '3.5.1'}}, > >>> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]}, > 'cpuModel': > >>> >>> > >> 'Intel(R) > >>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge': 'false', > >>> >>> > >> 'hooks': > >>> >>> > >> {}, > >>> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux': {'mode': > '1'}, > >>> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', '2.3'], > >>> >>> > >> 'networks': > >>> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr': '43.252.176.16', > >>> >>> > >> 'bridged': > >>> >>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': > >>> >>> > >> '1500', > >>> >>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0', 'ipv4addrs': > >>> >>> > >> [' > >>> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>], 'interface': > >>> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway': '43.25.17.1'}, > >>> >>> > >> 'Internal': > >>> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE': 'no', > >>> >>> > >> 'HOTPLUG': > >>> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': 'no', > >>> >>> > >> 'BOOTPROTO': > >>> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE': 'Bridge', > >>> >>> > >> 'ONBOOT': > >>> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs': > >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], > >>> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', 'stp': > >>> >>> > >> 'off', > >>> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::', 'ports': > >>> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', 'addr': > >>> >>> > >> '10.10.10.6', > >>> >>> > >> 'bridged': False, 'ipv6addrs': > ['fe80::210:18ff:fecd:daac/64'], > >>> >>> > >> 'mtu': > >>> >>> > >> '9000', 'bootproto4': 'none', 'netmask': '255.255.255.0', > >>> >>> > >> 'ipv4addrs': [' > >>> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>], 'interface': > >>> >>> > >> u'bond1', > >>> >>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork': {'iface': > >>> >>> > >> 'VMNetwork', > >>> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU': > >>> >>> > >> '1500', > >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', > 'STP': > >>> >>> > >> 'off', > >>> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': 'no'}, > >>> >>> > >> 'bridged': > >>> >>> > >> True, > >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'gateway': '', > >>> >>> > >> 'bootproto4': > >>> >>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], 'mtu': > >>> >>> > >> '1500', > >>> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, 'bridges': > >>> >>> > >> {'Internal': > >>> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU': > >>> >>> > >> '9000', > >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', > 'STP': > >>> >>> > >> 'off', > >>> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': 'no'}, > >>> >>> > >> 'ipv6addrs': > >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000', 'netmask': '', > >>> >>> > >> 'stp': > >>> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', 'gateway': '', > >>> >>> > >> 'opts': > >>> >>> > >> {'topology_change_detected': '0', > 'multicast_last_member_count': > >>> >>> > >> '2', > >>> >>> > >> 'hash_elasticity': '4', 'multicast_query_response_interval': > >>> >>> > >> '999', > >>> >>> > >> 'multicast_snooping': '1', 'multicast_startup_query_interval': > >>> >>> > >> '3124', > >>> >>> > >> 'hello_timer': '31', 'multicast_querier_interval': '25496', > >>> >>> > >> 'max_age': > >>> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0', 'root_id': > >>> >>> > >> '8000.001018cddaac', 'priority': '32768', > >>> >>> > >> 'multicast_membership_interval': > >>> >>> > >> '25996', 'root_path_cost': '0', 'root_port': '0', > >>> >>> > >> 'multicast_querier': > >>> >>> > >> '0', > >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199', > >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.001018cddaac', > >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', > >>> >>> > >> 'gc_timer': > >>> >>> > >> '31', > >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', > >>> >>> > >> 'multicast_query_interval': '12498', > >>> >>> > >> 'multicast_last_member_interval': > >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports': > >>> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg': {'DEFROUTE': > >>> >>> > >> 'no', > >>> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0', 'NM_CONTROLLED': > >>> >>> > >> 'no', > >>> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': 'VMNetwork', > >>> >>> > >> 'TYPE': > >>> >>> > >> 'Bridge', > >>> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs': > ['fe80::62eb:69ff:fe20:b46c/64'], > >>> >>> > >> 'mtu': > >>> >>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], > >>> >>> > >> 'ipv6gateway': > >>> >>> > >> '::', > >>> >>> > >> 'gateway': '', 'opts': {'topology_change_detected': '0', > >>> >>> > >> 'multicast_last_member_count': '2', 'hash_elasticity': '4', > >>> >>> > >> 'multicast_query_response_interval': '999', > >>> >>> > >> 'multicast_snooping': > >>> >>> > >> '1', > >>> >>> > >> 'multicast_startup_query_interval': '3124', 'hello_timer': > >>> >>> > >> '131', > >>> >>> > >> 'multicast_querier_interval': '25496', 'max_age': '1999', > >>> >>> > >> 'hash_max': > >>> >>> > >> '512', 'stp_state': '0', 'root_id': '8000.60eb6920b46c', > >>> >>> > >> 'priority': > >>> >>> > >> '32768', 'multicast_membership_interval': '25996', > >>> >>> > >> 'root_path_cost': > >>> >>> > >> '0', > >>> >>> > >> 'root_port': '0', 'multicast_querier': '0', > >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199', > >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.60eb6920b46c', > >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', > >>> >>> > >> 'gc_timer': > >>> >>> > >> '31', > >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', > >>> >>> > >> 'multicast_query_interval': '12498', > >>> >>> > >> 'multicast_last_member_interval': > >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports': > >>> >>> > >> ['bond0.36']}}, 'uuid': > '44454C4C-4C00-1057-8053-B7C04F504E31', > >>> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3': {'permhwaddr': > >>> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': 'yes', > >>> >>> > >> 'NM_CONTROLLED': > >>> >>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae', 'MASTER': > >>> >>> > >> 'bond1', > >>> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu': > >>> >>> > >> '9000', > >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '00:10:18:cd:da:ac', > >>> >>> > >> 'speed': > >>> >>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac', 'addr': '', > >>> >>> > >> 'cfg': > >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '9000', > 'HWADDR': > >>> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': 'eth2', > >>> >>> > >> 'ONBOOT': > >>> >>> > >> 'no'}, > >>> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '', 'ipv4addrs': > [], > >>> >>> > >> 'hwaddr': > >>> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1': {'permhwaddr': > >>> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': 'yes', > >>> >>> > >> 'NM_CONTROLLED': > >>> >>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d', 'MASTER': > >>> >>> > >> 'bond0', > >>> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [], 'mtu': > >>> >>> > >> '1500', > >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', > >>> >>> > >> 'speed': > >>> >>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c', 'addr': '', > >>> >>> > >> 'cfg': > >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '1500', > 'HWADDR': > >>> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': 'eth0', > >>> >>> > >> 'ONBOOT': > >>> >>> > >> 'yes'}, > >>> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '', 'ipv4addrs': > [], > >>> >>> > >> 'hwaddr': > >>> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}}, 'software_revision': > '1', > >>> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4', '3.5'], > >>> >>> > >> 'cpuFlags': > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> > u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270', > >>> >>> > >> 'ISCSIInitiatorName': 'iqn.1994-05.com.redhat:32151ce183c8', > >>> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': ['3.0', '3.1', > >>> >>> > >> '3.2', > >>> >>> > >> '3.3', > >>> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem': '321', > >>> >>> > >> 'bondings': > >>> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': > '', > >>> >>> > >> 'slaves': > >>> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', > 'cfg': > >>> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': 'no', > >>> >>> > >> 'BONDING_OPTS': > >>> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': 'yes'}, > >>> >>> > >> 'ipv6addrs': > >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500', 'netmask': > '', > >>> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', 'slaves': > >>> >>> > >> ['eth0', > >>> >>> > >> 'eth1'], > >>> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': {'addr': > >>> >>> > >> '10.10.10.6', > >>> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6', 'HOTPLUG': > >>> >>> > >> 'no', > >>> >>> > >> 'MTU': > >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', > >>> >>> > >> 'BOOTPROTO': > >>> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', 'DEVICE': > 'bond1', > >>> >>> > >> 'ONBOOT': > >>> >>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'mtu': > >>> >>> > >> '9000', > >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['10.10.10.6/24' > >>> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr': '00:10:18:cd:da:ac', > >>> >>> > >> 'slaves': > >>> >>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': '4'}}, > >>> >>> > >> 'bond2': > >>> >>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', > 'slaves': > >>> >>> > >> [], > >>> >>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': > {}, > >>> >>> > >> 'mtu': > >>> >>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr': > >>> >>> > >> '00:00:00:00:00:00'}}, > >>> >>> > >> 'software_version': '4.16', 'memSize': '24019', 'cpuSpeed': > >>> >>> > >> '2667.000', > >>> >>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': [6, 7, 8, > >>> >>> > >> 9, > >>> >>> > >> 10, 11, > >>> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': '12278', > 'cpus': > >>> >>> > >> [0, > >>> >>> > >> 1, 2, > >>> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': 'Snow > Man', > >>> >>> > >> 'vlans': > >>> >>> > >> {'bond0.10': {'iface': 'bond0', 'addr': '43.25.17.16', 'cfg': > >>> >>> > >> {'DEFROUTE': > >>> >>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', 'HOTPLUG': > 'no', > >>> >>> > >> 'GATEWAY': > >>> >>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK': > '255.255.255.0', > >>> >>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': '1500', > >>> >>> > >> 'ONBOOT': > >>> >>> > >> 'yes'}, > >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 10, > >>> >>> > >> 'mtu': > >>> >>> > >> '1500', > >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['43.25.17.16/24'] > >>> >>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36': {'iface': > 'bond0', > >>> >>> > >> 'addr': > >>> >>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes', 'HOTPLUG': > >>> >>> > >> 'no', > >>> >>> > >> 'MTU': > >>> >>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36', 'ONBOOT': > >>> >>> > >> 'no'}, > >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 36, > >>> >>> > >> 'mtu': > >>> >>> > >> '1500', > >>> >>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': {'iface': > 'bond1', > >>> >>> > >> 'addr': > >>> >>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes', 'HOTPLUG': > >>> >>> > >> 'no', > >>> >>> > >> 'MTU': > >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100', > 'ONBOOT': > >>> >>> > >> 'no'}, > >>> >>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'vlanid': 100, > >>> >>> > >> 'mtu': > >>> >>> > >> '9000', > >>> >>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12', > >>> >>> > >> 'kvmEnabled': > >>> >>> > >> 'true', > >>> >>> > >> 'guestOverhead': '65', 'cpuThreads': '24', 'emulatedMachines': > >>> >>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0', > u'rhel6.2.0', > >>> >>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', u'rhel5.4.4', > >>> >>> > >> u'rhel5.4.0'], > >>> >>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1', 'version': > >>> >>> > >> '6', > >>> >>> > >> 'name': > >>> >>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client > >>> >>> > >> [10.10.10.2]::call > >>> >>> > >> getHardwareInfo with () {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return > >>> >>> > >> getHardwareInfo > >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info': > >>> >>> > >> {'systemProductName': 'CS24-TY', 'systemSerialNumber': > >>> >>> > >> '7LWSPN1', > >>> >>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00', > 'systemUUID': > >>> >>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31', 'systemManufacturer': > >>> >>> > >> 'Dell'}} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client > >>> >>> > >> [10.10.10.2]::call > >>> >>> > >> hostsList with () {} flowID [222e8036] > >>> >>> > >> Thread-13::ERROR::2014-11-24 > >>> >>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm > exception > >>> >>> > >> occured > >>> >>> > >> Traceback (most recent call last): > >>> >>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in > >>> >>> > >> wrapper > >>> >>> > >> res = f(*args, **kwargs) > >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in wrapper > >>> >>> > >> rv = func(*args, **kwargs) > >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in > hostsList > >>> >>> > >> return {'hosts': self.svdsmProxy.glusterPeerStatus()} > >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ > >>> >>> > >> return callMethod() > >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> > >>> >>> > >> **kwargs) > >>> >>> > >> File "<string>", line 2, in glusterPeerStatus > >>> >>> > >> File "/usr/lib64/python2.6/multiprocessing/managers.py", > line > >>> >>> > >> 740, > >>> >>> > >> in > >>> >>> > >> _callmethod > >>> >>> > >> raise convert_to_error(kind, result) > >>> >>> > >> GlusterCmdExecFailedException: Command execution failed > >>> >>> > >> error: Connection failed. Please check if gluster daemon is > >>> >>> > >> operational. > >>> >>> > >> return code: 1 > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState) > >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state > >>> >>> > >> init > >>> >>> > >> -> > >>> >>> > >> state preparing > >>> >>> > >> Thread-13::INFO::2014-11-24 > >>> >>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and > >>> >>> > >> protect: > >>> >>> > >> repoStats(options=None) > >>> >>> > >> Thread-13::INFO::2014-11-24 > >>> >>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and > >>> >>> > >> protect: > >>> >>> > >> repoStats, Return response: {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare) > >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState) > >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state > >>> >>> > >> preparing > >>> >>> > >> -> > >>> >>> > >> state finished > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> > 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) > >>> >>> > >> Owner.releaseAll requests {} resources {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> > >>> >>> > >> > >>> >>> > >> > 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) > >>> >>> > >> Owner.cancelAll requests {} > >>> >>> > >> Thread-13::DEBUG::2014-11-24 > >>> >>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref) > >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting > >>> >>> > >> False > >>> >>> > >> ------------------------------- > >>> >>> > >> > >>> >>> > >> [root@compute4 ~]# service glusterd status > >>> >>> > >> glusterd is stopped > >>> >>> > >> [root@compute4 ~]# chkconfig --list | grep glusterd > >>> >>> > >> glusterd 0:off 1:off 2:on 3:on 4:on 5:on > >>> >>> > >> 6:off > >>> >>> > >> [root@compute4 ~]# > >>> >>> > >> > >>> >>> > >> Thanks, > >>> >>> > >> Punit > >>> >>> > >> > >>> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj < > kmayi...@redhat.com> > >>> >>> > >> wrote: > >>> >>> > >> > >>> >>> > >>> Can you send the corresponding error in vdsm.log from the > >>> >>> > >>> host? > >>> >>> > >>> > >>> >>> > >>> Also check if glusterd service is running. > >>> >>> > >>> > >>> >>> > >>> Thanks, > >>> >>> > >>> Kanagaraj > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote: > >>> >>> > >>> > >>> >>> > >>> Hi, > >>> >>> > >>> > >>> >>> > >>> After reboot my Hypervisior host can not activate again in > the > >>> >>> > >>> cluster > >>> >>> > >>> and failed with the following error :- > >>> >>> > >>> > >>> >>> > >>> Gluster command [<UNKNOWN>] failed on server... > >>> >>> > >>> > >>> >>> > >>> Engine logs :- > >>> >>> > >>> > >>> >>> > >>> 2014-11-24 18:05:28,397 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) START, > >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = > >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90 > >>> >>> > >>> 2014-11-24 18:05:30,609 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH, > >>> >>> > >>> GlusterVolumesListVDSCommand, > >>> >>> > >>> return: > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@d95203e0 > }, > >>> >>> > >>> log id: 5f251c90 > >>> >>> > >>> 2014-11-24 18:05:33,768 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] > >>> >>> > >>> (ajp--127.0.0.1-8702-8) > >>> >>> > >>> [287d570d] Lock Acquired to object EngineLock > [exclusiveLocks= > >>> >>> > >>> key: > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS > >>> >>> > >>> , sharedLocks= ] > >>> >>> > >>> 2014-11-24 18:05:33,795 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running > command: > >>> >>> > >>> ActivateVdsCommand internal: false. Entities affected : ID: > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction group > >>> >>> > >>> MANIPULATE_HOST > >>> >>> > >>> with role type ADMIN > >>> >>> > >>> 2014-11-24 18:05:33,796 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before > acquiring > >>> >>> > >>> lock in > >>> >>> > >>> order to prevent monitoring for host Compute5 from > data-center > >>> >>> > >>> SV_WTC > >>> >>> > >>> 2014-11-24 18:05:33,797 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock acquired, > >>> >>> > >>> from > >>> >>> > >>> now a > >>> >>> > >>> monitoring of host will be skipped for host Compute5 from > >>> >>> > >>> data-center > >>> >>> > >>> SV_WTC > >>> >>> > >>> 2014-11-24 18:05:33,817 INFO > >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START, > >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned, > >>> >>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false), log > id: > >>> >>> > >>> 1cbc7311 > >>> >>> > >>> 2014-11-24 18:05:33,820 INFO > >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH, > >>> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311 > >>> >>> > >>> 2014-11-24 18:05:34,086 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished. Lock > >>> >>> > >>> released. > >>> >>> > >>> Monitoring can run now for host Compute5 from data-center > >>> >>> > >>> SV_WTC > >>> >>> > >>> 2014-11-24 18:05:34,088 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID: 287d570d, > >>> >>> > >>> Job > >>> >>> > >>> ID: > >>> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null, > Custom > >>> >>> > >>> Event ID: > >>> >>> > >>> -1, Message: Host Compute5 was activated by admin. > >>> >>> > >>> 2014-11-24 18:05:34,090 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] > >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object > >>> >>> > >>> EngineLock > >>> >>> > >>> [exclusiveLocks= key: 0bf6b00f-7947-4411-b55a-cc5eea2b381a > >>> >>> > >>> value: > >>> >>> > >>> VDS > >>> >>> > >>> , sharedLocks= ] > >>> >>> > >>> 2014-11-24 18:05:35,792 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START, > >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = > >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832 > >>> >>> > >>> 2014-11-24 18:05:37,064 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) START, > >>> >>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId = > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, > >>> >>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log > >>> >>> > >>> id: > >>> >>> > >>> 6d560cc2 > >>> >>> > >>> 2014-11-24 18:05:37,074 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH, > >>> >>> > >>> GetHardwareInfoVDSCommand, log > >>> >>> > >>> id: 6d560cc2 > >>> >>> > >>> 2014-11-24 18:05:37,093 WARN > >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is running > >>> >>> > >>> with > >>> >>> > >>> disabled > >>> >>> > >>> SELinux. > >>> >>> > >>> 2014-11-24 18:05:37,127 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running > command: > >>> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true. > >>> >>> > >>> Entities > >>> >>> > >>> affected > >>> >>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS > >>> >>> > >>> 2014-11-24 18:05:37,147 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START, > >>> >>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId = > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87 > >>> >>> > >>> 2014-11-24 18:05:37,164 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH, > >>> >>> > >>> GlusterServersListVDSCommand, log id: 4faed87 > >>> >>> > >>> 2014-11-24 18:05:37,189 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running > command: > >>> >>> > >>> SetNonOperationalVdsCommand internal: true. Entities > affected : > >>> >>> > >>> ID: > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS > >>> >>> > >>> 2014-11-24 18:05:37,206 INFO > >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START, > >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=NonOperational, > >>> >>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED, > >>> >>> > >>> stopSpmFailureLogged=false), > >>> >>> > >>> log id: fed5617 > >>> >>> > >>> 2014-11-24 18:05:37,209 INFO > >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH, > >>> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617 > >>> >>> > >>> 2014-11-24 18:05:37,223 ERROR > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID: > >>> >>> > >>> 4a84c4e5, > >>> >>> > >>> Job > >>> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack: null, > >>> >>> > >>> Custom > >>> >>> > >>> Event > >>> >>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed on server > >>> >>> > >>> Compute5. > >>> >>> > >>> 2014-11-24 18:05:37,243 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID: > >>> >>> > >>> null, > >>> >>> > >>> Call > >>> >>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host > >>> >>> > >>> Compute5 > >>> >>> > >>> was > >>> >>> > >>> set > >>> >>> > >>> to NonOperational. > >>> >>> > >>> 2014-11-24 18:05:37,272 INFO > >>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running command: > >>> >>> > >>> HandleVdsVersionCommand internal: true. Entities affected : > >>> >>> > >>> ID: > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS > >>> >>> > >>> 2014-11-24 18:05:37,274 INFO > >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host > >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is already in > >>> >>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED. > >>> >>> > >>> SetNonOperationalVds command is skipped. > >>> >>> > >>> 2014-11-24 18:05:38,065 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH, > >>> >>> > >>> GlusterVolumesListVDSCommand, return: > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@4e72a1b1 > }, > >>> >>> > >>> log id: 48a0c832 > >>> >>> > >>> 2014-11-24 18:05:43,243 INFO > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] > >>> >>> > >>> (DefaultQuartzScheduler_Worker-35) START, > >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = > >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc > >>> >>> > >>> ^C > >>> >>> > >>> [root@ccr01 ~]# > >>> >>> > >>> > >>> >>> > >>> Thanks, > >>> >>> > >>> Punit > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> _______________________________________________ > >>> >>> > >>> Users mailing > >>> >>> > >>> > >>> >>> > >>> listUsers@ovirt.orghttp:// > lists.ovirt.org/mailman/listinfo/users > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >>> > >>> >>> > >> > >>> >>> > >> > >>> >>> > > > >>> >>> > > > >>> >>> > > >>> >> > >>> >> > >>> > > >>> > > >>> > _______________________________________________ > >>> > Gluster-users mailing list > >>> > Gluster-users@gluster.org > >>> > http://supercolony.gluster.org/mailman/listinfo/gluster-users > >> > >> > > >
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://supercolony.gluster.org/mailman/listinfo/gluster-users