Hi, this is my first attempt at Gluster storage. Just a quick help me get started question - the bare metal page yields a "not found" on the web site so...
I have two dell 2950s fully populated with 5 x 300GB 10K disks. I want to get as much storage out of these as possible. I have two more dell 2950s each with 4 x 146GB 10K disks. Should I build one RAID 5 container on the first two servers, load up CentOS7 and then Gluster on that? using the unused partition of what is left after loading CentOS? Or should I be looking at moving physical disks around and putting the smaller 146 GB disks as RAID 1 in each of the 4 servers for OS and distributing the 300GB disks amoung all the servers and maybe pick some more up on Ebay to get all 4 servers identical? Would appreciate any advice on short notice as I have nothing else to do today for once and would just as soon at least start off on the right foot! Bill Dossett Systems Architect Tech Central - Global Engineering Services T +1 303 440 3523 M +44 (0)777 590 8612 [email protected]<mailto:[email protected]> pitneybowes.com<http://pitneybowes.com/> Pitney Bowes 4750 Walnut Street | Boulder, Colorado, 80301 | USA In Engineering? Raise a ticket via Remedy Anywhere [HERE<applewebdata://5D25CA10-0BA9-4233-9DDF-69951F87F8AB/teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/newIncident.aspx>] takes less than a minute CloudForms User Guide available [HERE<https://dl.dropboxusercontent.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20v5.pdf>] ________________________________
_______________________________________________ Gluster-users mailing list [email protected] http://www.gluster.org/mailman/listinfo/gluster-users
