FYI, I’ve tried with both glusterfs and NFS mounts, and the reaction is the same. The value of ping.timeout seems to have no effect at all.
I did discover one thing that makes a difference on reboot. There is a second service descriptor for “glusterfsd”, which is not enabled by default, but is started by something else (glusterd, I assume?). However, whatever it is that starts the process, does not shut it down cleanly during a reboot… and it appears to be the loss of that process without de-registration in the peer group that causes the other nodes to hang. If I enable the service (chkconfig glusterfsd on), it does nothing by default because the config is commented out (/etc/sysconfig/glusterfsd). But, having those K scripts in place in rc.d, I can manually touch /var/lock/subsys/glusterfsd, and then I can successfully reboot one node without the others hanging. This at least helps when I need to take a node down for maintenance; it obviously still does nothing for a true node failure. I guess my next step is to figure out to modify the init scripts for glusterd to touch the other lock file on startup as well. Does not seem a very elegant solution, but having the lock file in place and the init scripts enabled seems to solve at least half of the issue. —CJ > On Apr 25, 2015, at 11:34 AM, Corey Kovacs <[email protected]> wrote: > > That's not cool..you certainly have a quorum. are you using the fuse client > or regular old nfs? > > C > > On Apr 24, 2015 4:50 PM, "CJ Baar" <[email protected] <mailto:[email protected]>> > wrote: > Corey— > I was able to get a third node setup. I recreated the volume as “replica 3”. > The hang still happens (on two nodes, now) when I reboot a single node, even > though two are still surviving, which should constitute a quorum. > —CJ > > >> On Apr 17, 2015, at 6:18 AM, Corey Kovacs <[email protected] >> <mailto:[email protected]>> wrote: >> >> Typically you need to meet a quorum requirement to run just about any >> cluster. By definition, two nodes doesn't make a good cluster. A third >> node would let you start with just two since that would allow you to meet >> quorum. Can you add a third node to at least test? >> >> Corey >> >> On Apr 16, 2015 6:52 PM, "CJ Baar" <[email protected] >> <mailto:[email protected]>> wrote: >> I appreciate the info. I have tried adjust the ping-timeout setting, and it >> has seems to have no effect. The whole system hangs for 45+ seconds, which >> is about what it takes the second node to reboot, no matter what the value >> of ping-timeout is. The output of the mnt-log is below. It shows the >> adjust value I am currently testing (30s), but the system still hangs for >> longer than that. >> >> Also, I have realized that the problem is deeper than I originally thought. >> It’s not just the mount that is hanging when a node reboots… it appears to >> be the entire system. I cannot use my SSH connection, no matter where I am >> in the system, and services such as httpd become unresponsive. I can ping >> the “surviving” system, but other than that it appears pretty unusable. >> This is a major drawback to using gluster. I can’t afford to lost two >> entire systems if one dies. >> >> [2015-04-16 22:59:21.281365] C >> [rpc-clnt-ping.c:109:rpc_clnt_ping_timer_expired] 0-common-client-0: server >> 172.31.64.200:49152 <http://172.31.64.200:49152/> has not responded in the >> last 30 seconds, disconnecting. >> [2015-04-16 22:59:21.281560] E [rpc-clnt.c:362:saved_frames_unwind] (--> >> /usr/lib64/libglusterfs.so.0(_gf_log_callingfn+0x1e0)[0x7fce96450550] (--> >> /usr/lib64/libgfrpc.so.0(saved_frames_unwind+0x1e7)[0x7fce96225787] (--> >> /usr/lib64/libgfrpc.so.0(saved_frames_destroy+0xe)[0x7fce9622589e] (--> >> /usr/lib64/libgfrpc.so.0(rpc_clnt_connection_cleanup+0x91)[0x7fce96225951] >> (--> /usr/lib64/libgfrpc.so.0(rpc_clnt_notify+0x15f)[0x7fce96225f1f] ))))) >> 0-common-client-0: forced unwinding frame type(GlusterFS 3.3) op(LOOKUP(27)) >> called at 2015-04-16 22:58:45.830962 (xid=0x6d) >> [2015-04-16 22:59:21.281588] W [client-rpc-fops.c:2766:client3_3_lookup_cbk] >> 0-common-client-0: remote operation failed: Transport endpoint is not >> connected. Path: / (00000000-0000-0000-0000-000000000001) >> [2015-04-16 22:59:21.281788] E [rpc-clnt.c:362:saved_frames_unwind] (--> >> /usr/lib64/libglusterfs.so.0(_gf_log_callingfn+0x1e0)[0x7fce96450550] (--> >> /usr/lib64/libgfrpc.so.0(saved_frames_unwind+0x1e7)[0x7fce96225787] (--> >> /usr/lib64/libgfrpc.so.0(saved_frames_destroy+0xe)[0x7fce9622589e] (--> >> /usr/lib64/libgfrpc.so.0(rpc_clnt_connection_cleanup+0x91)[0x7fce96225951] >> (--> /usr/lib64/libgfrpc.so.0(rpc_clnt_notify+0x15f)[0x7fce96225f1f] ))))) >> 0-common-client-0: forced unwinding frame type(GF-DUMP) op(NULL(2)) called >> at 2015-04-16 22:58:51.277528 (xid=0x6e) >> [2015-04-16 22:59:21.281806] W [rpc-clnt-ping.c:154:rpc_clnt_ping_cbk] >> 0-common-client-0: socket disconnected >> [2015-04-16 22:59:21.281816] I [client.c:2215:client_rpc_notify] >> 0-common-client-0: disconnected from common-client-0. Client process will >> keep trying to connect to glusterd until brick's port is available >> [2015-04-16 22:59:21.283637] I [socket.c:3292:socket_submit_request] >> 0-common-client-0: not connected (priv->connected = 0) >> [2015-04-16 22:59:21.283663] W [rpc-clnt.c:1562:rpc_clnt_submit] >> 0-common-client-0: failed to submit rpc-request (XID: 0x6f Program: >> GlusterFS 3.3, ProgVers: 330, Proc: 27) to rpc-transport (common-client-0) >> [2015-04-16 22:59:21.283674] W [client-rpc-fops.c:2766:client3_3_lookup_cbk] >> 0-common-client-0: remote operation failed: Transport endpoint is not >> connected. Path: /src (63fc077b-869d-4928-8819-a79cc5c5ffa6) >> [2015-04-16 22:59:21.284219] W [client-rpc-fops.c:2766:client3_3_lookup_cbk] >> 0-common-client-0: remote operation failed: Transport endpoint is not >> connected. Path: (null) (00000000-0000-0000-0000-000000000000) >> [2015-04-16 22:59:52.322952] E >> [client-handshake.c:1496:client_query_portmap_cbk] 0-common-client-0: failed >> to get the port number for [root@cfm-c glusterfs]# >> >> >> —CJ >> >> >> >>> On Apr 7, 2015, at 10:26 PM, Ravishankar N <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> >>> >>> On 04/07/2015 10:11 PM, CJ Baar wrote: >>>> Then, I issue “init 0” on node2, and the mount on node1 becomes >>>> unresponsive. This is the log from node1 >>>> [2015-04-07 16:36:04.250693] W >>>> [glusterd-op-sm.c:4021:glusterd_op_modify_op_ctx] 0-management: op_ctx >>>> modification failed >>>> [2015-04-07 16:36:04.251102] I >>>> [glusterd-handler.c:3803:__glusterd_handle_status_volume] 0-management: >>>> Received status volume req for volume test1 >>>> The message "I [MSGID: 106004] >>>> [glusterd-handler.c:4365:__glusterd_peer_rpc_notify] 0-management: Peer >>>> 1069f037-13eb-458e-a9c4-0e7e79e595d0, in Peer in Cluster state, has >>>> disconnected from glusterd." repeated 39 times between [2015-04-07 >>>> 16:34:40.609878] and [2015-04-07 16:36:37.752489] >>>> [2015-04-07 16:36:40.755989] I [MSGID: 106004] >>>> [glusterd-handler.c:4365:__glusterd_peer_rpc_notify] 0-management: Peer >>>> 1069f037-13eb-458e-a9c4-0e7e79e595d0, in Peer in Cluster state, has >>>> disconnected from glusterd. >>> This is the glusterd log. Could you also share the mount log of the healthy >>> node in the non-responsive -->responsive time interval? >>> If this is indeed the ping timer issue, you should see something like: >>> "server xxx has not responded in the last 42 seconds, disconnecting." >>> Have you, for testing sake, tried reducing the network.ping-timeout value >>> to something lower and checked that the hang happens only for that time? >>>> >>>> This does not seem like desired behaviour. I was trying to create this >>>> cluster because I was under the impression it would be more resilient than >>>> a single-point-of-failure NFS server. However, if the mount halts when one >>>> node in the cluster dies, then I’m no better off. >>>> >>>> I also can’t seem to figure out how to bring a volume online if only one >>>> node in the cluster is running; again, not really functioning as HA. The >>>> gluster service runs and the volume “starts”, but it is not “online” or >>>> mountable until both nodes are running. In a situation where a node fails >>>> and we need storage online before we can troubleshoot the cause of the >>>> node failure, how do I get a volume to go online? >>> This is expected behavior. In a two node cluster, if only one is powered >>> on, glusterd will not start other gluster processes (brick, nfs, shd ) >>> until the glusterd of the other node is also up (i.e. quorum is met). If >>> you want to override this behavior, do a `gluster vol start <volname> >>> force` on the node that is up. >>> >>> -Ravi >>>> >>>> Thanks. >>> >> >> >> _______________________________________________ >> Gluster-users mailing list >> [email protected] <mailto:[email protected]> >> http://www.gluster.org/mailman/listinfo/gluster-users >> <http://www.gluster.org/mailman/listinfo/gluster-users> >
_______________________________________________ Gluster-users mailing list [email protected] http://www.gluster.org/mailman/listinfo/gluster-users
