Thanks for your response. I tried to your suggestion. root@node1:~/gluster_ec# mount ... 10gnode1:disp on /mnt/gluster type fuse.glusterfs (rw,default_permissions,allow_other,max_read=131072) root@node1:~/gluster_ec# !dd dd if=/dev/zero of=/mnt/gluster/test.io.1 bs=1024k count=1024 oflag=direct dd: error writing ‘/mnt/gluster/test.io.1’: Invalid argument dd: closing output file ‘/mnt/gluster/test.io.1’: Invalid argument
but, I got the same error. Regards. 2015-09-18 19:23 GMT+09:00 Javier Talens Segui <[email protected]>: > mount -t glusterfs 10gnode1:disp_vol /mnt/gluster > > Note. remove the / when indicate the volume name, try like that and check > if the volume is mounted before accesing it: > > mount (you should see 10gnode1:disp_vol on /mnt/gluster (rw,telatime..... > etc) > > Regards, > J. > > > On 2015-09-18 03:00, 이태화 wrote: > >> Hi, I have tested Disperse volume. >> >> so I perform a test using "dd" >> >> >> I'm using 4 nodes. and nodes are connected through 10g network. >> >> *Volume creation & mount command:* >> root@node1:~# gluster vol create disp_vol disperse 4 redundancy 1 >> 10gnode1:/node/dispv 10gnode2:/node/dispv 10gnode3:/node/dispv >> 10gnode4:/node/dispv >> This configuration is not optimal on most workloads. Do you want to use it >> ? (y/n) y >> volume create: disp_vol: success: please start the volume to access data >> root@node1:~# gluster vol start disp_vol >> volume start: disp_vol: success >> root@node1:~# mount -t glusterfs 10gnode1:/disp_vol /mnt/gluster >> >> *Test command & error message:* >> root@node1:~# dd if=/dev/zero of=/mnt/gluster/test.io.1 oflag=direct >> bs=1024k count=1024 >> dd: error writing ‘/mnt/gluster/test.io.1’: Invalid argument >> dd: closing output file ‘/mnt/gluster/test.io.1’: Invalid argument >> >> >> To recognize why, I saw logs. but I didn't know reasons. >> >> *Warning messages in /var/log/glusterfs/mnt-gluster.log* >> >> [2015-09-18 00:39:38.460320] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-2: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.460320] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-1: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.464081] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-3: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.464297] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-0: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.464459] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 18: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.464643] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 19: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.464801] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 20: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.464958] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 21: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.465114] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 22: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.465278] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 23: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.465433] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 24: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.465585] W [fuse-bridge.c:2240:fuse_writev_cbk] >> 0-glusterfs-fuse: 25: WRITE => -1 (Invalid argument) >> [2015-09-18 00:39:38.465529] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-0: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.465863] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-1: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.465890] W [fuse-bridge.c:690:fuse_truncate_cbk] >> 0-glusterfs-fuse: 26: FTRUNCATE() ERR => -1 (Invalid argument) >> [2015-09-18 00:39:38.466192] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-2: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.466353] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-3: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.467464] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-0: remote >> operation failed [Invalid argument] >> [2015-09-18 00:39:38.467848] W [MSGID: 114031] >> [client-rpc-fops.c:904:client3_3_writev_cbk] 0-disp_vol-client-1: remote >> operation failed [Invalid argument] >> ---- repeated ---- >> [2015-09-18 00:39:38.473542] W [fuse-bridge.c:1230:fuse_err_cbk] >> 0-glusterfs-fuse: 27: FLUSH() ERR => -1 (Invalid argument) >> >> >> I need your help. anything about this is fine. >> >> If you need some environment informations, I'm ready to inform that. >> >> Thanks >> >> _______________________________________________ >> Gluster-users mailing list >> [email protected] >> http://www.gluster.org/mailman/listinfo/gluster-users >> > > -- > Javier Talens Segui > University of Bergen > Senior Engineer >
_______________________________________________ Gluster-users mailing list [email protected] http://www.gluster.org/mailman/listinfo/gluster-users
