Hi Sahina, I have done the same but still the same result...
On Fri, Oct 9, 2015 at 12:23 PM, Sahina Bose <[email protected]> wrote: > You can update the packages with the ones built from source. > You will need to update both the client and server nrpe packages with the > modified payload limit to resolve this > - nagios-plugins-nrpe > - nrpe > > Have you done that? > > > On 10/09/2015 07:17 AM, Punit Dambiwal wrote: > > Hi Ramesh, > > Even after recompile nrpe with increased value still the same issue... > > Thanks, > Punit > > On Fri, Oct 9, 2015 at 9:21 AM, Punit Dambiwal <[email protected]> wrote: > >> Hi Ramesh, >> >> Thanks for the update...as i have install nagios and nrpe via yum,should >> i need to remove nrpe and reinstall through source package ?? >> >> Thanks, >> Punit >> >> On Thu, Oct 8, 2015 at 6:49 PM, Ramesh Nachimuthu < <[email protected]> >> [email protected]> wrote: >> >>> Looks like you are hitting the NRPE Payload issue. Standard NRPE >>> packages from epel/fedora has 1024 bytes payload limit. We have to >>> increment this to 8192 to fix this. You can see more info at >>> <http://serverfault.com/questions/613288/truncating-return-data-as-it-is-bigger-then-nrpe-allows> >>> http://serverfault.com/questions/613288/truncating-return-data-as-it-is-bigger-then-nrpe-allows. >>> >>> >>> Let me know if u need any more info. >>> >>> Regards, >>> Ramesh >>> >>> >>> On 10/08/2015 02:48 PM, Punit Dambiwal wrote: >>> >>> Hi, >>> >>> I am getting the following error :- >>> >>> ---------------- >>> [root@monitor-001 yum.repos.d]# >>> /usr/lib64/nagios/plugins/gluster/discovery.py -c ssd -H stor1 >>> Traceback (most recent call last): >>> File "/usr/lib64/nagios/plugins/gluster/discovery.py", line 510, in >>> <module> >>> clusterdata = discoverCluster(args.hostip, args.cluster, >>> args.timeout) >>> File "/usr/lib64/nagios/plugins/gluster/discovery.py", line 88, in >>> discoverCluster >>> componentlist = discoverVolumes(hostip, timeout) >>> File "/usr/lib64/nagios/plugins/gluster/discovery.py", line 56, in >>> discoverVolumes >>> timeout=timeout) >>> File "/usr/lib64/nagios/plugins/gluster/server_utils.py", line 107, in >>> execNRPECommand >>> resultDict = json.loads(outputStr) >>> File "/usr/lib64/python2.6/json/__init__.py", line 307, in loads >>> return _default_decoder.decode(s) >>> File "/usr/lib64/python2.6/json/decoder.py", line 319, in decode >>> obj, end = self.raw_decode(s, idx=_w(s, 0).end()) >>> File "/usr/lib64/python2.6/json/decoder.py", line 336, in raw_decode >>> obj, end = self._scanner.iterscan(s, **kw).next() >>> File "/usr/lib64/python2.6/json/scanner.py", line 55, in iterscan >>> rval, next_pos = action(m, context) >>> File "/usr/lib64/python2.6/json/decoder.py", line 183, in JSONObject >>> value, end = iterscan(s, idx=end, context=context).next() >>> File "/usr/lib64/python2.6/json/scanner.py", line 55, in iterscan >>> rval, next_pos = action(m, context) >>> File "/usr/lib64/python2.6/json/decoder.py", line 183, in JSONObject >>> value, end = iterscan(s, idx=end, context=context).next() >>> File "/usr/lib64/python2.6/json/scanner.py", line 55, in iterscan >>> rval, next_pos = action(m, context) >>> File "/usr/lib64/python2.6/json/decoder.py", line 217, in JSONArray >>> value, end = iterscan(s, idx=end, context=context).next() >>> File "/usr/lib64/python2.6/json/scanner.py", line 55, in iterscan >>> rval, next_pos = action(m, context) >>> File "/usr/lib64/python2.6/json/decoder.py", line 183, in JSONObject >>> value, end = iterscan(s, idx=end, context=context).next() >>> File "/usr/lib64/python2.6/json/scanner.py", line 55, in iterscan >>> rval, next_pos = action(m, context) >>> File "/usr/lib64/python2.6/json/decoder.py", line 155, in JSONString >>> return scanstring(match.string, match.end(), encoding, strict) >>> ValueError: ('Invalid control character at: line 1 column 1023 (char >>> 1023)', '{"ssd": {"name": "ssd", "disperseCount": "0", "bricks": >>> [{"brickpath": "/bricks/b/vol1", "brickaddress": "stor1", "hostUuid": >>> "5fcb5150-f0a5-4af8-b383-11fa5d3f82f0"}, {"brickpath": "/bricks/b/vol1", >>> "brickaddress": "stor2", "hostUuid": >>> "b78d42c1-6ad7-4044-b900-3ccfe915859f"}, {"brickpath": "/bricks/b/vol1", >>> "brickaddress": "stor3", "hostUuid": >>> "40500a9d-418d-4cc0-aec5-6efbfb3c24e5"}, {"brickpath": "/bricks/b/vol1", >>> "brickaddress": "stor4", "hostUuid": >>> "5886ef94-df5e-4845-a54c-0e01546d66ea"}, {"brickpath": "/bricks/c/vol1", >>> "brickaddress": "stor1", "hostUuid": >>> "5fcb5150-f0a5-4af8-b383-11fa5d3f82f0"}, {"brickpath": "/bricks/c/vol1", >>> "brickaddress": "stor2", "hostUuid": >>> "b78d42c1-6ad7-4044-b900-3ccfe915859f"}, {"brickpath": "/bricks/c/vol1", >>> "brickaddress": "stor3", "hostUuid": >>> "40500a9d-418d-4cc0-aec5-6efbfb3c24e5"}, {"brickpath": "/bricks/c/vol1", >>> "brickaddress": "stor4", "hostUuid": >>> "5886ef94-df5e-4845-a54c-0e01546d66ea"}, {"brickpath": "/bricks/d/vol1", >>> "brickaddress": "stor1", "hostUuid": "5fcb5150-f0a5-4a\n') >>> [root@monitor-001 yum.repos.d]# >>> ------------------------- >>> >>> -------------- >>> [root@monitor-001 yum.repos.d]# /usr/lib64/nagios/plugins/check_nrpe -H >>> stor1 -c discover_volume_list >>> {"ssd": {"type": "DISTRIBUTED_REPLICATE", "name": "ssd"}, "lockvol": >>> {"type": "REPLICATE", "name": "lockvol"}} >>> [root@monitor-001 yum.repos.d]# >>> -------------- >>> >>> Please help me to solve this issue... >>> >>> Thanks, >>> Punit >>> >>> On Fri, Oct 2, 2015 at 12:15 AM, Sahina Bose < <[email protected]> >>> [email protected]> wrote: >>> >>>> The gluster-nagios packages have not been tested on Ubuntu >>>> >>>> Looking at the error below, it looks like the rpm has not updated the >>>> nrpe.cfg correctly. You may need to edit the spec file for the config file >>>> paths on Ubuntu and rebuild. >>>> >>>> >>>> On 10/01/2015 05:45 PM, Amudhan P wrote: >>>> >>>> OSError: [Errno 2] No such file or directory is now sorted out by by >>>> changing NRPE_PATH in "constants.py". >>>> >>>> now if i run discovery.py >>>> >>>> testusr@gfsovirt:/usr/local/lib/nagios/plugins/gluster$ sudo python >>>> discovery.py -c vm-gfs -H 192.168.1.11 >>>> Failed to execute NRPE command 'discover_volume_list' in host >>>> '192.168.1.11' >>>> Error : NRPE: Command 'discover_volume_list' not defined >>>> Make sure NRPE server in host '192.168.1.11' is configured to accept >>>> requests from Nagios server >>>> >>>> >>>> testusr@gfsovirt:/usr/local/lib/nagios/plugins/gluster$ >>>> /usr/lib/nagios/plugins/check_nrpe -H 192.168.1.11 -c discover_volume_list >>>> NRPE: Command 'discover_volume_list' not defined >>>> >>>> >>>> My client is responding to other nrpe command. >>>> testusr@gfsovirt:/usr/local/lib/nagios/plugins/gluster$ >>>> /usr/lib/nagios/plugins/check_nrpe -H 192.168.1.11 -c check_load >>>> OK - load average: 0.01, 0.03, 0.10|load1=0.010;15.000;30.000;0; >>>> load5=0.030;10.000;25.000;0; load15=0.100;5.000;20.000;0; >>>> >>>> >>>> >>>> On Thu, Oct 1, 2015 at 5:20 PM, Sahina Bose < <[email protected]> >>>> [email protected]> wrote: >>>> >>>>> Looks like a conflict in versions of python and python-cpopen. >>>>> Can you give us the version of these packages? >>>>> >>>>> Also, what's the output of >>>>> /usr/lib64/nagios/plugins/check_nrpe -H 192.168.1.11 -c >>>>> discover_volume_list >>>>> >>>>> >>>>> >>>>> >>>>> On 10/01/2015 04:10 PM, Amudhan P wrote: >>>>> >>>>> Hi, >>>>> >>>>> I am getting a error when i run discovery.py. >>>>> >>>>> discovery.py -c vm-gfs -H 192.168.1.11 >>>>> >>>>> Traceback (most recent call last): >>>>> File "discovery.py", line 541, in <module> >>>>> clusterdata = discoverCluster(args.hostip, args.cluster, >>>>> args.timeout) >>>>> File "discovery.py", line 90, in discoverCluster >>>>> componentlist = discoverVolumes(hostip, timeout) >>>>> File "discovery.py", line 53, in discoverVolumes >>>>> timeout=timeout) >>>>> File "/usr/local/lib/nagios/plugins/gluster/server_utils.py", line >>>>> 114, in execNRPECommand >>>>> (returncode, outputStr, err) = utils.execCmd(nrpeCmd, raw=True) >>>>> File "/usr/lib/python2.7/dist-packages/glusternagios/utils.py", line >>>>> 403, in execCmd >>>>> deathSignal=deathSignal, childUmask=childUmask) >>>>> File "/usr/local/lib/python2.7/dist-packages/cpopen/__init__.py", >>>>> line 63, in __init__ >>>>> **kw) >>>>> File "/usr/lib/python2.7/subprocess.py", line 710, in __init__ >>>>> errread, errwrite) >>>>> File "/usr/local/lib/python2.7/dist-packages/cpopen/__init__.py", >>>>> line 82, in _execute_child_v276 >>>>> restore_sigpipe=restore_sigpipe >>>>> File "/usr/local/lib/python2.7/dist-packages/cpopen/__init__.py", >>>>> line 107, in _execute_child_v275 >>>>> restore_sigpipe >>>>> OSError: [Errno 2] No such file or directory >>>>> >>>>> Gluster version : 3.7.4 >>>>> OS : Ubuntu 14.04 >>>>> Complied from source tar file. >>>>> >>>>> >>>>> regards >>>>> Amudhan >>>>> >>>>> >>>>> >>>>> >>>>> On Wed, Sep 30, 2015 at 6:21 PM, Humble Devassy Chirammal < >>>>> <[email protected]>[email protected]> wrote: >>>>> >>>>>> The EL7 rpms of gluster-nagios are available @ >>>>>> <http://download.gluster.org/pub/gluster/glusterfs-nagios/1.1.0/> >>>>>> http://download.gluster.org/pub/gluster/glusterfs-nagios/1.1.0/ >>>>>> >>>>>> Hope it helps! >>>>>> >>>>>> --Humble >>>>>> >>>>>> >>>>>> On Tue, Sep 29, 2015 at 10:56 AM, Sahina Bose < <[email protected]> >>>>>> [email protected]> wrote: >>>>>> >>>>>>> We will publish the EL7 builds soon. >>>>>>> >>>>>>> The source tarballs are now available at - >>>>>>> <http://download.gluster.org/pub/gluster/glusterfs-nagios/> >>>>>>> http://download.gluster.org/pub/gluster/glusterfs-nagios/ >>>>>>> >>>>>>> thanks >>>>>>> sahina >>>>>>> >>>>>>> >>>>>>> On 09/25/2015 12:55 PM, Humble Devassy Chirammal wrote: >>>>>>> >>>>>>> HI Michael, >>>>>>> >>>>>>> Yes, only el6 packages are available @ >>>>>>> <http://download.gluster.org/pub/gluster/glusterfs-nagios/> >>>>>>> http://download.gluster.org/pub/gluster/glusterfs-nagios/ . I am >>>>>>> looping nagios project team leads to this thread. Lets wait for them to >>>>>>> revert. >>>>>>> >>>>>>> --Humble >>>>>>> >>>>>>> >>>>>>> On Sun, Sep 20, 2015 at 2:32 PM, Prof. Dr. Michael Schefczyk < >>>>>>> <[email protected]>[email protected]> wrote: >>>>>>> >>>>>>>> Dear All, >>>>>>>> >>>>>>>> In June 2014, the gluster-nagios team (thanks!) published the >>>>>>>> availability of gluster-nagios-common and gluster-nagios-addons on this >>>>>>>> list. As far as I can tell, this quite extensive gluster nagios >>>>>>>> monitoring >>>>>>>> tool is available for el6 only. Are there known plans to make this >>>>>>>> available for el7 outside the RHEL-repos ( >>>>>>>> <http://ftp.redhat.de/pub/redhat/linux/enterprise/7Server/en/RHS/SRPMS/> >>>>>>>> http://ftp.redhat.de/pub/redhat/linux/enterprise/7Server/en/RHS/SRPMS/), >>>>>>>> e.g. for use with oVirt / Centos 7 also? It would be good to be able to >>>>>>>> monitor gluster without playing around with scripts from sources other >>>>>>>> than >>>>>>>> a rpm repo. >>>>>>>> >>>>>>>> Regards, >>>>>>>> >>>>>>>> Michael >>>>>>>> _______________________________________________ >>>>>>>> Gluster-users mailing list >>>>>>>> <[email protected]>[email protected] >>>>>>>> <http://www.gluster.org/mailman/listinfo/gluster-users> >>>>>>>> http://www.gluster.org/mailman/listinfo/gluster-users >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Gluster-users mailing list >>>>>> <[email protected]>[email protected] >>>>>> <http://www.gluster.org/mailman/listinfo/gluster-users> >>>>>> http://www.gluster.org/mailman/listinfo/gluster-users >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> _______________________________________________ >>>> Gluster-users mailing list >>>> [email protected] >>>> http://www.gluster.org/mailman/listinfo/gluster-users >>>> >>> >>> >>> >>> _______________________________________________ >>> Gluster-users mailing >>> [email protected]http://www.gluster.org/mailman/listinfo/gluster-users >>> >>> >>> >> > >
_______________________________________________ Gluster-users mailing list [email protected] http://www.gluster.org/mailman/listinfo/gluster-users
