Thanks David,
My settings are all defaults, i have just created the pool and started it.
I have set the settings as your recommendation and it seems to be the
same issue;
Type: Striped-Replicate
Volume ID: 44adfd8c-2ed1-4aa5-b256-d12b64f7fc14
Status: Started
Number of Bricks: 1 x 2 x 2 = 4
Transport-type: tcp
Bricks:
Brick1: gfs001:/bricks/t1/s
Brick2: gfs002:/bricks/t1/s
Brick3: gfs001:/bricks/t2/s
Brick4: gfs002:/bricks/t2/s
Options Reconfigured:
performance.stat-prefetch: off
network.remote-dio: on
cluster.eager-lock: enable
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
performance.readdir-ahead: on
On 03/12/2016 03:25 PM, David Gossage wrote:
On Sat, Mar 12, 2016 at 1:55 AM, Mahdi Adnan
<[email protected] <mailto:[email protected]>>
wrote:
Dears,
I have created a replicated striped volume with two bricks and two
servers but I can't use it because when I mount it in ESXi and try
to migrate a VM to it, the data get corrupted.
Is any one have any idea why is this happening ?
Dell 2950 x2
Seagate 15k 600GB
CentOS 7.2
Gluster 3.7.8
Appreciate your help.
Most reports of this I have seen end up being settings related. Post
gluster volume info. Below is what I have seen as most common
recommended settings.
I'd hazard a guess you may have some the read ahead cache or prefetch on.
quick-read=off
read-ahead=off
io-cache=off
stat-prefetch=off
eager-lock=enable
remote-dio=on
Mahdi Adnan
System Admin
_______________________________________________
Gluster-users mailing list
[email protected] <mailto:[email protected]>
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
[email protected]
http://www.gluster.org/mailman/listinfo/gluster-users
