Hi Kotresh,

Writing new file.

getfattr -m. -e hex -d /media/disk2/brick2/data/G/test58-bs10M-c100.nul
getfattr: Removing leading '/' from absolute path names
# file: media/disk2/brick2/data/G/test58-bs10M-c100.nul
trusted.bit-rot.version=0x020000000000000057da8b23000b120e
trusted.ec.config=0x0000080501000200
trusted.ec.size=0x000000003e800000
trusted.ec.version=0x0000000000001f400000000000001f40
trusted.gfid=0x6e7c49e6094e443585bff21f99fd8764


Running ls -l in brick 2 pid

ls -l /proc/30162/fd

lr-x------ 1 root root 64 Sep 21 16:22 59 ->
/media/disk2/brick2/.glusterfs/quanrantine
lrwx------ 1 root root 64 Sep 21 16:22 6 ->
/var/lib/glusterd/vols/glsvol1/run/10.1.2.2-media-disk2-brick2.pid
lr-x------ 1 root root 64 Sep 21 16:25 60 ->
/media/disk2/brick2/.glusterfs/6e/7c/6e7c49e6-094e-4435-85bf-f21f99fd8764
lr-x------ 1 root root 64 Sep 21 16:22 61 ->
/media/disk2/brick2/.glusterfs/quanrantine


find /media/disk2/ -samefile
/media/disk2/brick2/.glusterfs/6e/7c/6e7c49e6-094e-4435-85bf-f21f99fd8764
/media/disk2/brick2/.glusterfs/6e/7c/6e7c49e6-094e-4435-85bf-f21f99fd8764
/media/disk2/brick2/data/G/test58-bs10M-c100.nul



On Wed, Sep 21, 2016 at 3:28 PM, Kotresh Hiremath Ravishankar <
khire...@redhat.com> wrote:

> Hi Amudhan,
>
> Don't grep for the filename, glusterfs maintains hardlink in .glusterfs
> directory
> for each file. Just check 'ls -l /proc/<respective brick pid>/fd' for any
> fds opened
> for a file in .glusterfs and check if it's the same file.
>
> Thanks and Regards,
> Kotresh H R
>
> ----- Original Message -----
> > From: "Amudhan P" <amudha...@gmail.com>
> > To: "Kotresh Hiremath Ravishankar" <khire...@redhat.com>
> > Cc: "Gluster Users" <gluster-users@gluster.org>
> > Sent: Wednesday, September 21, 2016 1:33:10 PM
> > Subject: Re: [Gluster-users] 3.8.3 Bitrot signature process
> >
> > Hi Kotresh,
> >
> > i have used below command to verify any open fd for file.
> >
> > "ls -l /proc/*/fd | grep filename".
> >
> > as soon as write completes there no open fd's, if there is any alternate
> > option. please let me know will also try that.
> >
> >
> >
> >
> > Also, below is my scrub status in my test setup. number of skipped files
> > slow reducing day by day. I think files are skipped due to bitrot
> signature
> > process is not completed yet.
> >
> > where can i see scrub skipped files?
> >
> >
> > Volume name : glsvol1
> >
> > State of scrub: Active (Idle)
> >
> > Scrub impact: normal
> >
> > Scrub frequency: daily
> >
> > Bitrot error log location: /var/log/glusterfs/bitd.log
> >
> > Scrubber error log location: /var/log/glusterfs/scrub.log
> >
> >
> > =========================================================
> >
> > Node: localhost
> >
> > Number of Scrubbed files: 1644
> >
> > Number of Skipped files: 1001
> >
> > Last completed scrub time: 2016-09-20 11:59:58
> >
> > Duration of last scrub (D:M:H:M:S): 0:0:39:26
> >
> > Error count: 0
> >
> >
> > =========================================================
> >
> > Node: 10.1.2.3
> >
> > Number of Scrubbed files: 1644
> >
> > Number of Skipped files: 1001
> >
> > Last completed scrub time: 2016-09-20 10:50:00
> >
> > Duration of last scrub (D:M:H:M:S): 0:0:38:17
> >
> > Error count: 0
> >
> >
> > =========================================================
> >
> > Node: 10.1.2.4
> >
> > Number of Scrubbed files: 981
> >
> > Number of Skipped files: 1664
> >
> > Last completed scrub time: 2016-09-20 12:38:01
> >
> > Duration of last scrub (D:M:H:M:S): 0:0:35:19
> >
> > Error count: 0
> >
> >
> > =========================================================
> >
> > Node: 10.1.2.1
> >
> > Number of Scrubbed files: 1263
> >
> > Number of Skipped files: 1382
> >
> > Last completed scrub time: 2016-09-20 11:57:21
> >
> > Duration of last scrub (D:M:H:M:S): 0:0:37:17
> >
> > Error count: 0
> >
> >
> > =========================================================
> >
> > Node: 10.1.2.2
> >
> > Number of Scrubbed files: 1644
> >
> > Number of Skipped files: 1001
> >
> > Last completed scrub time: 2016-09-20 11:59:25
> >
> > Duration of last scrub (D:M:H:M:S): 0:0:39:18
> >
> > Error count: 0
> >
> > =========================================================
> >
> >
> >
> >
> > Thanks
> > Amudhan
> >
> >
> > On Wed, Sep 21, 2016 at 11:45 AM, Kotresh Hiremath Ravishankar <
> > khire...@redhat.com> wrote:
> >
> > > Hi Amudhan,
> > >
> > > I don't think it's the limitation with read data from the brick.
> > > To limit the usage of CPU, throttling is done using token bucket
> > > algorithm. The log message showed is related to it. But even then
> > > I think it should not take 12 minutes for check-sum calculation unless
> > > there is an fd open (might be internal). Could you please cross verify
> > > if there are any fd opened on that file by looking into /proc? I will
> > > also test it out in the mean time and get back to you.
> > >
> > > Thanks and Regards,
> > > Kotresh H R
> > >
> > > ----- Original Message -----
> > > > From: "Amudhan P" <amudha...@gmail.com>
> > > > To: "Kotresh Hiremath Ravishankar" <khire...@redhat.com>
> > > > Cc: "Gluster Users" <gluster-users@gluster.org>
> > > > Sent: Tuesday, September 20, 2016 3:19:28 PM
> > > > Subject: Re: [Gluster-users] 3.8.3 Bitrot signature process
> > > >
> > > > Hi Kotresh,
> > > >
> > > > Please correct me if i am wrong, Once a file write completes and as
> soon
> > > as
> > > > closes fds, bitrot waits for 120 seconds and starts hashing and
> update
> > > > signature for the file in brick.
> > > >
> > > > But, what i am feeling that bitrot takes too much of time to complete
> > > > hashing.
> > > >
> > > > below is test result i would like to share.
> > > >
> > > >
> > > > writing data in below path using dd :
> > > >
> > > > /mnt/gluster/data/G (mount point)
> > > > -rw-r--r-- 1 root root  10M Sep 20 12:19 test53-bs10M-c1.nul
> > > > -rw-r--r-- 1 root root 100M Sep 20 12:19 test54-bs10M-c10.nul
> > > >
> > > > No any other write or read process is going on.
> > > >
> > > >
> > > > Checking file data in one of the brick.
> > > >
> > > > -rw-r--r-- 2 root root 2.5M Sep 20 12:23 test53-bs10M-c1.nul
> > > > -rw-r--r-- 2 root root  25M Sep 20 12:23 test54-bs10M-c10.nul
> > > >
> > > > file's stat and getfattr info from brick, after write process
> completed.
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ stat test53-bs10M-c1.nul
> > > >   File: ‘test53-bs10M-c1.nul’
> > > >   Size: 2621440         Blocks: 5120       IO Block: 4096   regular
> file
> > > > Device: 821h/2081d      Inode: 536874168   Links: 2
> > > > Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/
> root)
> > > > Access: 2016-09-20 12:23:28.798886647 +0530
> > > > Modify: 2016-09-20 12:23:28.994886646 +0530
> > > > Change: 2016-09-20 12:23:28.998886646 +0530
> > > >  Birth: -
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ stat test54-bs10M-c10.nul
> > > >   File: ‘test54-bs10M-c10.nul’
> > > >   Size: 26214400        Blocks: 51200      IO Block: 4096   regular
> file
> > > > Device: 821h/2081d      Inode: 536874169   Links: 2
> > > > Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/
> root)
> > > > Access: 2016-09-20 12:23:42.902886624 +0530
> > > > Modify: 2016-09-20 12:23:44.378886622 +0530
> > > > Change: 2016-09-20 12:23:44.378886622 +0530
> > > >  Birth: -
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ sudo getfattr -m. -e hex -d
> > > > test53-bs10M-c1.nul
> > > > # file: test53-bs10M-c1.nul
> > > > trusted.bit-rot.version=0x020000000000000057daa7b50002e5b4
> > > > trusted.ec.config=0x0000080501000200
> > > > trusted.ec.size=0x0000000000a00000
> > > > trusted.ec.version=0x00000000000000500000000000000050
> > > > trusted.gfid=0xe2416bd1aae4403c88f44286273bbe99
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ sudo getfattr -m. -e hex -d
> > > > test54-bs10M-c10.nul
> > > > # file: test54-bs10M-c10.nul
> > > > trusted.bit-rot.version=0x020000000000000057daa7b50002e5b4
> > > > trusted.ec.config=0x0000080501000200
> > > > trusted.ec.size=0x0000000006400000
> > > > trusted.ec.version=0x00000000000003200000000000000320
> > > > trusted.gfid=0x54e018dd8c5a4bd79e0317729d8a57c5
> > > >
> > > >
> > > >
> > > > file's stat and getfattr info from brick, after bitrot signature
> updated.
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ stat test53-bs10M-c1.nul
> > > >   File: ‘test53-bs10M-c1.nul’
> > > >   Size: 2621440         Blocks: 5120       IO Block: 4096   regular
> file
> > > > Device: 821h/2081d      Inode: 536874168   Links: 2
> > > > Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/
> root)
> > > > Access: 2016-09-20 12:25:31.494886450 +0530
> > > > Modify: 2016-09-20 12:23:28.994886646 +0530
> > > > Change: 2016-09-20 12:27:00.994886307 +0530
> > > >  Birth: -
> > > >
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ sudo getfattr -m. -e hex -d
> > > > test53-bs10M-c1.nul
> > > > # file: test53-bs10M-c1.nul
> > > > trusted.bit-rot.signature=0x0102000000000000006de7493c5c
> > > 90f643357c268fbaaf461c1567e0334e4948023ce17268403aa37a
> > > > trusted.bit-rot.version=0x020000000000000057daa7b50002e5b4
> > > > trusted.ec.config=0x0000080501000200
> > > > trusted.ec.size=0x0000000000a00000
> > > > trusted.ec.version=0x00000000000000500000000000000050
> > > > trusted.gfid=0xe2416bd1aae4403c88f44286273bbe99
> > > >
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ stat test54-bs10M-c10.nul
> > > >   File: ‘test54-bs10M-c10.nul’
> > > >   Size: 26214400        Blocks: 51200      IO Block: 4096   regular
> file
> > > > Device: 821h/2081d      Inode: 536874169   Links: 2
> > > > Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/
> root)
> > > > Access: 2016-09-20 12:25:47.510886425 +0530
> > > > Modify: 2016-09-20 12:23:44.378886622 +0530
> > > > Change: 2016-09-20 12:38:05.954885243 +0530
> > > >  Birth: -
> > > >
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ sudo getfattr -m. -e hex -d
> > > > test54-bs10M-c10.nul
> > > > # file: test54-bs10M-c10.nul
> > > > trusted.bit-rot.signature=0x010200000000000000394c345f0b
> > > 0c63ee652627a62eed069244d35c4d5134e4f07d4eabb51afda47e
> > > > trusted.bit-rot.version=0x020000000000000057daa7b50002e5b4
> > > > trusted.ec.config=0x0000080501000200
> > > > trusted.ec.size=0x0000000006400000
> > > > trusted.ec.version=0x00000000000003200000000000000320
> > > > trusted.gfid=0x54e018dd8c5a4bd79e0317729d8a57c5
> > > >
> > > >
> > > > (Actual time taken for reading file from brick for md5sum)
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ time md5sum
> test53-bs10M-c1.nul
> > > > 8354dcaa18a1ecb52d0895bf00888c44  test53-bs10M-c1.nul
> > > >
> > > > real    0m0.045s
> > > > user    0m0.007s
> > > > sys     0m0.003s
> > > >
> > > > gfstst-node5:/media/disk2/brick2/data/G$ time md5sum
> > > test54-bs10M-c10.nul
> > > > bed3c0a4a1407f584989b4009e9ce33f  test54-bs10M-c10.nul
> > > >
> > > > real    0m0.166s
> > > > user    0m0.062s
> > > > sys     0m0.011s
> > > >
> > > > As you can see that 'test54-bs10M-c10.nul' file took around 12
> minutes to
> > > > update bitort signature (pls refer stat output for the file).
> > > >
> > > > what would be the cause for such a slow read?. Any limitation in read
> > > data
> > > > from brick?
> > > >
> > > > Also, i am seeing this line bitd.log, what does this mean?
> > > > [bit-rot.c:1784:br_rate_limit_signer] 0-glsvol1-bit-rot-0: [Rate
> Limit
> > > > Info] "tokens/sec (rate): 131072, maxlimit: 524288
> > > >
> > > >
> > > > Thanks
> > > > Amudhan P
> > > >
> > > >
> > > >
> > > > On Mon, Sep 19, 2016 at 1:00 PM, Kotresh Hiremath Ravishankar <
> > > > khire...@redhat.com> wrote:
> > > >
> > > > > Hi Amudhan,
> > > > >
> > > > > Thanks for testing out the bitrot feature and sorry for the delayed
> > > > > response.
> > > > > Please find the answers inline.
> > > > >
> > > > > Thanks and Regards,
> > > > > Kotresh H R
> > > > >
> > > > > ----- Original Message -----
> > > > > > From: "Amudhan P" <amudha...@gmail.com>
> > > > > > To: "Gluster Users" <gluster-users@gluster.org>
> > > > > > Sent: Friday, September 16, 2016 4:14:10 PM
> > > > > > Subject: Re: [Gluster-users] 3.8.3 Bitrot signature process
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Can anyone reply to this mail.
> > > > > >
> > > > > > On Tue, Sep 13, 2016 at 12:49 PM, Amudhan P <
> amudha...@gmail.com >
> > > > > wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I am testing bitrot feature in Gluster 3.8.3 with disperse EC
> volume
> > > 4+1.
> > > > > >
> > > > > > When i write single small file (< 10MB) after 2 seconds i can see
> > > bitrot
> > > > > > signature in bricks for the file, but when i write multiple files
> > > with
> > > > > > different size ( > 10MB) it takes long time (> 24hrs) to see
> bitrot
> > > > > > signature in all the files.
> > > > >
> > > > >    The default timeout for signing to happen is 120 seconds. So the
> > > > > signing will happen
> > > > >   120 secs after the last fd gets closed on that file. So if the
> file
> > > is
> > > > > being written
> > > > >   continuously, it will not be signed until 120 secs after it's
> last
> > > fd is
> > > > > closed.
> > > > > >
> > > > > > My questions are.
> > > > > > 1. I have enabled scrub schedule as hourly and throttle as
> normal,
> > > does
> > > > > this
> > > > > > make any impact in delaying bitrot signature?
> > > > >       No.
> > > > > > 2. other than "bitd.log" where else i can watch current status of
> > > bitrot,
> > > > > > like number of files added for signature and file status?
> > > > >      Signature will happen after 120 sec of last fd closure, as
> said
> > > above.
> > > > >      There is not status command which tracks the signature of the
> > > files.
> > > > >      But there is bitrot status command which tracks the number of
> > > files
> > > > >      scrubbed.
> > > > >
> > > > >      #gluster vol bitrot <volname> scrub status
> > > > >
> > > > >
> > > > > > 3. where i can confirm that all the files in the brick are bitrot
> > > signed?
> > > > >
> > > > >      As said, signing information of all the files is not tracked.
> > > > >
> > > > > > 4. is there any file read size limit in bitrot?
> > > > >
> > > > >      I didn't get. Could you please elaborate this ?
> > > > >
> > > > > > 5. options for tuning bitrot for faster signing of files?
> > > > >
> > > > >      Bitrot feature is mainly to detect silent corruption
> (bitflips) of
> > > > > files due to long
> > > > >      term storage. Hence the default is 120 sec of last fd
> closure, the
> > > > > signing happens.
> > > > >      But there is a tune able which can change the default 120 sec
> but
> > > > > that's only for
> > > > >      testing purposes and we don't recommend it.
> > > > >
> > > > >       gluster vol get master features.expiry-time
> > > > >
> > > > >      For testing purposes, you can change this default and test.
> > > > > >
> > > > > > Thanks
> > > > > > Amudhan
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Gluster-users mailing list
> > > > > > Gluster-users@gluster.org
> > > > > > http://www.gluster.org/mailman/listinfo/gluster-users
> > > > >
> > > >
> > >
> >
>
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users

Reply via email to