Your volumes named "group0" and "group1" are not replicating, according
to the volume info you included in your original email. They're both
distribute volumes with no replication.
On 10/20/2016 08:55 PM, Cory Sanders wrote:
Niels,
Thanks for your answer. Can you look at the du examples below. Right now I am
concerned with gluster0:group0 and group1
They are not replicating properly. They are supposed to replicate across 3 of
my 5 nodes. Not shown here are nodes 2 and 3.
Thanks!
root@node0:/data/brick1# du -h -d 2
382G ./group0/.glusterfs
8.0K ./group0/images
0 ./group0/template
0 ./group0/dump
382G ./group0
0 ./group1/.glusterfs
0 ./group1/images
0 ./group1/template
0 ./group1/dump
0 ./group1
382G .
root@node1:/data/brick1# du -h -d 2
148G ./gluster/.glusterfs
4.0K ./gluster/images
0 ./gluster/template
0 ./gluster/dump
0 ./gluster/private
148G ./gluster
0 ./safe/images
0 ./safe/template
0 ./safe/dump
0 ./safe
314G ./group0/.glusterfs
4.0K ./group0/images
0 ./group0/template
0 ./group0/dump
314G ./group0
182G ./group1/.glusterfs
0 ./group1/images
0 ./group1/template
0 ./group1/dump
182G ./group1
643G .
root@node4:/data/brick1# du -h -d 2
3.2T ./machines0/.glusterfs
0 ./machines0/images
0 ./machines0/template
76K ./machines0/dump
0 ./machines0/private
3.2T ./machines0
196G ./group1/.glusterfs
0 ./group1/images
0 ./group1/template
0 ./group1/dump
196G ./group1
255G ./group0/.glusterfs
4.0K ./group0/images
0 ./group0/template
0 ./group0/dump
255G ./group0
1.5T ./backups/.glusterfs
0 ./backups/images
0 ./backups/template
28K ./backups/dump
1.5T ./backups
5.1T .
root@node4:/data/brick1#
-----Original Message-----
From: Niels de Vos [mailto:nde...@redhat.com]
Sent: Tuesday, October 18, 2016 1:28 AM
To: Cory Sanders <c...@securecloudsolutions.com>
Cc: gluster-users@gluster.org
Subject: Re: [Gluster-users] gluster0:group1 not matching up with mounted
directory
On Tue, Oct 18, 2016 at 04:57:29AM +0000, Cory Sanders wrote:
I have volumes set up like this:
gluster> volume info
Volume Name: machines0
Type: Distribute
Volume ID: f602dd45-ddab-4474-8308-d278768f1e00
Status: Started
Number of Bricks: 1
Transport-type: tcp
Bricks:
Brick1: gluster4:/data/brick1/machines0
Volume Name: group1
Type: Distribute
Volume ID: cb64c8de-1f76-46c8-8136-8917b1618939
Status: Started
Number of Bricks: 1
Transport-type: tcp
Bricks:
Brick1: gluster1:/data/brick1/group1
Volume Name: backups
Type: Replicate
Volume ID: d7cb93c4-4626-46fd-b638-65fd244775ae
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: gluster3:/data/brick1/backups
Brick2: gluster4:/data/brick1/backups
Volume Name: group0
Type: Distribute
Volume ID: 0c52b522-5b04-480c-a058-d863df9ee949
Status: Started
Number of Bricks: 1
Transport-type: tcp
Bricks:
Brick1: gluster0:/data/brick1/group0
My problem is that when I do a disk free, group1 is filled up:
root@node0:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 10M 0 10M 0% /dev
tmpfs 3.2G 492K 3.2G 1% /run
/dev/mapper/pve-root 24G 12G 11G 52% /
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 6.3G 56M 6.3G 1% /run/shm
/dev/mapper/pve-data 48G 913M 48G 2% /var/lib/vz
/dev/sda1 495M 223M 248M 48% /boot
/dev/sdb1 740G 382G 359G 52% /data/brick1
/dev/fuse 30M 64K 30M 1% /etc/pve
gluster0:group0 740G 382G 359G 52% /mnt/pve/group0
16.xx.xx.137:backups 1.9T 1.6T 233G 88% /mnt/pve/backups
node4:machines0 7.3T 5.1T 2.3T 70% /mnt/pve/machines0
gluster0:group1 740G 643G 98G 87% /mnt/pve/group1
gluster2:/var/lib/vz 1.7T 182G 1.5T 11% /mnt/pve/node2local
When I do a du -h in the respective directories, this is what I get.
They don't match up with what a df -h shows. Gluster0:group0 shows
the right amount of disk free, but gluster0:group1 is too fat and does
not correspond to what is in /mnt/pve/group1
du and df work a little different:
- du: crawl the directory structure and calculate the size
- df: call the statfs() function that resturns information directly
from the (superblock of the) filesystem
This means, that all 'df' calls are routed to the bricks that are used for the
Gluster volume. Those bricks then call statfs() on behalf of the Gluster client
(fuse mountpoint), and the Gluster client uses the values returned by the
bricks to calculate the 'fake' output for 'df'.
Now, on your environment you seem to have the RAID1 filesystem mounted on
/data/brick1 (/dev/sdb1 in the above 'df' output). All of the bricks are also located
under /data/brick1/<volume>. This means that all 'df'
commands will execute statfs() on the same filesystem hosting all of the
bricks. Because statfs() returns the statistics over the whole filesystem
(/data/brick1), the used and available size of /data/brick1 will be used in the
calculations by the Gluster client to return the statistics to 'df'.
With this understanding, you should be able to verify the size of the
filesystems used for the bricks, and combine them per Gluster volume.
Any of the /data/brick1 filesystems that host multiple bricks will likely have
an 'unexpected' difference in available/used size.
HTH,
Niels
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://www.gluster.org/mailman/listinfo/gluster-users
