Assuming you're using FUSE, if your gluster volume is mounted at /some/dir, for example, then its corresponding logs will be at /var/log/glusterfs/some-dir.log
-Krutika On Fri, Nov 18, 2016 at 7:13 AM, Olivier Lambert <[email protected]> wrote: > Attached, bricks log. Where could I find the fuse client log? > > On Fri, Nov 18, 2016 at 2:22 AM, Krutika Dhananjay <[email protected]> > wrote: > > Could you attach the fuse client and brick logs? > > > > -Krutika > > > > On Fri, Nov 18, 2016 at 6:12 AM, Olivier Lambert < > [email protected]> > > wrote: > >> > >> Okay, used the exact same config you provided, and adding an arbiter > >> node (node3) > >> > >> After halting node2, VM continues to work after a small "lag"/freeze. > >> I restarted node2 and it was back online: OK > >> > >> Then, after waiting few minutes, halting node1. And **just** at this > >> moment, the VM is corrupted (segmentation fault, /var/log folder empty > >> etc.) > >> > >> dmesg of the VM: > >> > >> [ 1645.852905] EXT4-fs error (device xvda1): > >> htree_dirblock_to_tree:988: inode #19: block 8286: comm bash: bad > >> entry in directory: rec_len is smaller than minimal - offset=0(0), > >> inode=0, rec_len=0, name_len=0 > >> [ 1645.854509] Aborting journal on device xvda1-8. > >> [ 1645.855524] EXT4-fs (xvda1): Remounting filesystem read-only > >> > >> And got a lot of " comm bash: bad entry in directory" messages then... > >> > >> Here is the current config with all Node back online: > >> > >> # gluster volume info > >> > >> Volume Name: gv0 > >> Type: Replicate > >> Volume ID: 5f15c919-57e3-4648-b20a-395d9fe3d7d6 > >> Status: Started > >> Snapshot Count: 0 > >> Number of Bricks: 1 x (2 + 1) = 3 > >> Transport-type: tcp > >> Bricks: > >> Brick1: 10.0.0.1:/bricks/brick1/gv0 > >> Brick2: 10.0.0.2:/bricks/brick1/gv0 > >> Brick3: 10.0.0.3:/bricks/brick1/gv0 (arbiter) > >> Options Reconfigured: > >> nfs.disable: on > >> performance.readdir-ahead: on > >> transport.address-family: inet > >> features.shard: on > >> features.shard-block-size: 16MB > >> network.remote-dio: enable > >> cluster.eager-lock: enable > >> performance.io-cache: off > >> performance.read-ahead: off > >> performance.quick-read: off > >> performance.stat-prefetch: on > >> performance.strict-write-ordering: off > >> cluster.server-quorum-type: server > >> cluster.quorum-type: auto > >> cluster.data-self-heal: on > >> > >> > >> # gluster volume status > >> Status of volume: gv0 > >> Gluster process TCP Port RDMA Port Online > >> Pid > >> > >> ------------------------------------------------------------ > ------------------ > >> Brick 10.0.0.1:/bricks/brick1/gv0 49152 0 Y > >> 1331 > >> Brick 10.0.0.2:/bricks/brick1/gv0 49152 0 Y > >> 2274 > >> Brick 10.0.0.3:/bricks/brick1/gv0 49152 0 Y > >> 2355 > >> Self-heal Daemon on localhost N/A N/A Y > >> 2300 > >> Self-heal Daemon on 10.0.0.3 N/A N/A Y > >> 10530 > >> Self-heal Daemon on 10.0.0.2 N/A N/A Y > >> 2425 > >> > >> Task Status of Volume gv0 > >> > >> ------------------------------------------------------------ > ------------------ > >> There are no active volume tasks > >> > >> > >> > >> On Thu, Nov 17, 2016 at 11:35 PM, Olivier Lambert > >> <[email protected]> wrote: > >> > It's planned to have an arbiter soon :) It was just preliminary tests. > >> > > >> > Thanks for the settings, I'll test this soon and I'll come back to > you! > >> > > >> > On Thu, Nov 17, 2016 at 11:29 PM, Lindsay Mathieson > >> > <[email protected]> wrote: > >> >> On 18/11/2016 8:17 AM, Olivier Lambert wrote: > >> >>> > >> >>> gluster volume info gv0 > >> >>> > >> >>> Volume Name: gv0 > >> >>> Type: Replicate > >> >>> Volume ID: 2f8658ed-0d9d-4a6f-a00b-96e9d3470b53 > >> >>> Status: Started > >> >>> Snapshot Count: 0 > >> >>> Number of Bricks: 1 x 2 = 2 > >> >>> Transport-type: tcp > >> >>> Bricks: > >> >>> Brick1: 10.0.0.1:/bricks/brick1/gv0 > >> >>> Brick2: 10.0.0.2:/bricks/brick1/gv0 > >> >>> Options Reconfigured: > >> >>> nfs.disable: on > >> >>> performance.readdir-ahead: on > >> >>> transport.address-family: inet > >> >>> features.shard: on > >> >>> features.shard-block-size: 16MB > >> >> > >> >> > >> >> > >> >> When hosting VM's its essential to set these options: > >> >> > >> >> network.remote-dio: enable > >> >> cluster.eager-lock: enable > >> >> performance.io-cache: off > >> >> performance.read-ahead: off > >> >> performance.quick-read: off > >> >> performance.stat-prefetch: on > >> >> performance.strict-write-ordering: off > >> >> cluster.server-quorum-type: server > >> >> cluster.quorum-type: auto > >> >> cluster.data-self-heal: on > >> >> > >> >> Also with replica two and quorum on (required) your volume will > become > >> >> read-only when one node goes down to prevent the possibility of > >> >> split-brain > >> >> - you *really* want to avoid that :) > >> >> > >> >> I'd recommend a replica 3 volume, that way 1 node can go down, but > the > >> >> other > >> >> two still form a quorum and will remain r/w. > >> >> > >> >> If the extra disks are not possible, then a Arbiter volume can be > setup > >> >> - > >> >> basically dummy files on the third node. > >> >> > >> >> > >> >> > >> >> -- > >> >> Lindsay Mathieson > >> >> > >> >> _______________________________________________ > >> >> Gluster-users mailing list > >> >> [email protected] > >> >> http://www.gluster.org/mailman/listinfo/gluster-users > >> _______________________________________________ > >> Gluster-users mailing list > >> [email protected] > >> http://www.gluster.org/mailman/listinfo/gluster-users > > > > >
_______________________________________________ Gluster-users mailing list [email protected] http://www.gluster.org/mailman/listinfo/gluster-users
