Thanks D for the confirmation. I understand that is how it would have
happened, but we are still not sure why it would create the directory
only on s0 and not on others. Having said that, it is possible for it to
be only on s0 and not on others till s0 was restarted. So after 58 hours
of the repo being created, when glusterd was first restarted, that is
when it would have passed the volume's info to the other nodes during
handshake. Post this, every time you bring down glusterd on s0 and
delete the repo, it would get it back from other nodes in the cluster,
who now would have the repo. That is the only scenario in which we would
see the behaviour in which the volume was initially present on s0 but is
now present on other nodes.
We will keep you updated as and when we find the reason behind it
creating the volume in s0 only. Thanks.
Regards,
Avra
On 02/21/2017 09:02 PM, Gambit15 wrote:
Hi Avra,
On 21 February 2017 at 03:22, Avra Sengupta <[email protected]
<mailto:[email protected]>> wrote:
Hi D,
We tried reproducing the issue with a similar setup but were
unable to do so. We are still investigating it.
I have another follow-up question. You said that the repo exists
only in s0? If that was the case, then bringing glusterd down on
s0 only, deleteing the repo and starting glusterd once again would
have removed it. The fact that the repo is restored as soon as
glusterd restarts on s0, means that some other node(s) in the
cluster also has that repo and is passing that information to the
glusterd in s0 during handshake. Could you please confirm if any
other node apart from s0 has the particular
repo(/var/lib/glusterd/vols/data-teste) or not. Thanks.
I'll point out that this isn't a recurring issue. It's the first time
this has happened, and it's not happened since. If it wasn't for the
orphaned volume, I wouldn't even have requested support.
Huh, so, I've just rescanned all of the nodes, and the volume is now
appearing on all. That's very odd, as the volume was "created" on Weds
15th & until the end of the 17th it was still only appearing on s0
(both in the volume list & in the vols directory).
Grepping the etc-glusterfs-glusterd.vol logs, the first mention of the
volume after the failures I posted previously is the following...
[2017-02-17 15:46:17.199193] W [rpcsvc.c:265:rpcsvc_program_actor]
0-rpc-service: RPC program not available (req 1298437 330) for
10.123.123.102:49008 <http://10.123.123.102:49008>
[2017-02-17 15:46:17.199216] E
[rpcsvc.c:560:rpcsvc_check_and_reply_error] 0-rpcsvc: rpc actor failed
to complete successfully
[2017-02-17 22:20:58.525036] I [MSGID: 106004]
[glusterd-handler.c:5219:__glusterd_peer_rpc_notify] 0-management:
Peer <s3> (<978c228a-86f8-48dc-89c1-c63914eaa9a4>), in state <Peer in
Cluster>, has
disconnected from glusterd.
[2017-02-17 22:20:58.525128] W
[glusterd-locks.c:675:glusterd_mgmt_v3_unlock]
(-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0x1deac)
[0x7f2a85517eac] -->/usr/lib64/glusterfs/3.8.8/xlator/
mgmt/glusterd.so(+0x27a58) [0x7f2a85521a58]
-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0xd09da)
[0x7f2a855ca9da] ) 0-management: Lock for vol data not held
[2017-02-17 22:20:58.525144] W [MSGID: 106118]
[glusterd-handler.c:5241:__glusterd_peer_rpc_notify] 0-management:
Lock not released for data
[2017-02-17 22:20:58.525171] W
[glusterd-locks.c:675:glusterd_mgmt_v3_unlock]
(-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0x1deac)
[0x7f2a85517eac] -->/usr/lib64/glusterfs/3.8.8/xlator/
mgmt/glusterd.so(+0x27a58) [0x7f2a85521a58]
-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0xd09da)
[0x7f2a855ca9da] ) 0-management: Lock for vol data-novo not held
[2017-02-17 22:20:58.525182] W [MSGID: 106118]
[glusterd-handler.c:5241:__glusterd_peer_rpc_notify] 0-management:
Lock not released for data-novo
[2017-02-17 22:20:58.525205] W
[glusterd-locks.c:675:glusterd_mgmt_v3_unlock]
(-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0x1deac)
[0x7f2a85517eac]
-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0x27a58)
[0x7f2a85521a58]
-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0xd09da)
[0x7f2a855ca9da] ) 0-management: Lock for vol data-teste not held
[2017-02-17 22:20:58.525235] W [MSGID: 106118]
[glusterd-handler.c:5241:__glusterd_peer_rpc_notify] 0-management:
Lock not released for data-teste
[2017-02-17 22:20:58.525261] W
[glusterd-locks.c:675:glusterd_mgmt_v3_unlock]
(-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0x1deac)
[0x7f2a85517eac]
-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0x27a58)
[0x7f2a85521a58]
-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0xd09da)
[0x7f2a855ca9da] ) 0-management: Lock for vol data-teste2 not held
[2017-02-17 22:20:58.525272] W [MSGID: 106118]
[glusterd-handler.c:5241:__glusterd_peer_rpc_notify] 0-management:
Lock not released for data-teste2
That's 58 hours between the volume's failed creation & its first sign
of life...??
At the time when it was only appearing on s0, I tried stopping
glusterd on multiple occasions & deleting the volume's directory
within vols, but it always returned as soon as I restarted glusterd.
I did this with the help of Joe on IRC at the time, and he was also
stumped (he suggested that the data was possibly still being held in
memory somewhere), so I'm quite sure this wasn't simply an oversight
on my part.
Anyway, many thanks for the help, and I'd be happy to provide any logs
if desired, however whilst knowing what happened & why might be
useful, all now seems to have resolved itself.
Cheers,
Doug
Regards,
Avra
On 02/20/2017 06:51 PM, Gambit15 wrote:
Hi Avra,
On 20 February 2017 at 02:51, Avra Sengupta <[email protected]
<mailto:[email protected]>> wrote:
Hi D,
It seems you tried to take a clone of a snapshot, when that
snapshot was not activated.
Correct. As per my commands, I then noticed the issue, checked
the snapshot's status & activated it. I included this in my
command history just to clear up any doubts from the logs.
However in this scenario, the cloned volume should not be in
an inconsistent state. I will try to reproduce this and see
if it's a bug. Meanwhile could you please answer the
following queries:
1. How many nodes were in the cluster.
There are 4 nodes in a (2+1)x2 setup.
s0 replicates to s1, with an arbiter on s2, and s2 replicates to
s3, with an arbiter on s0.
2. How many bricks does the snapshot
data-bck_GMT-2017.02.09-14.15.43 have?
6 bricks, including the 2 arbiters.
3. Was the snapshot clone command issued from a node which
did not have any bricks for the snapshot
data-bck_GMT-2017.02.09-14.15.43
All commands were issued from s0. All volumes have bricks on
every node in the cluster.
4. I see you tried to delete the new cloned volume. Did the
new cloned volume land in this state after failure to create
the clone or failure to delete the clone
I noticed there was something wrong as soon as I created the
clone. The clone command completed, however I was then unable to
do anything with it because the clone didn't exist on s1-s3.
If you want to remove the half baked volume from the cluster
please proceed with the following steps.
1. bring down glusterd on all nodes by running the following
command on all nodes
$ systemctl stop glusterd.
Verify that the glusterd is down on all nodes by running the
following command on all nodes
$ systemctl status glusterd.
2. delete the following repo from all the nodes (whichever
nodes it exists)
/var/lib/glusterd/vols/data-teste
The repo only exists on s0, but stoppping glusterd on only s0 &
deleting the directory didn't work, the directory was restored as
soon as glusterd was restarted. I haven't yet tried stopping
glusterd on *all* nodes before doing this, although I'll need to
plan for that, as it'll take the entire cluster off the air.
Thanks for the reply,
Doug
Regards,
Avra
On 02/16/2017 08:01 PM, Gambit15 wrote:
Hey guys,
I tried to create a new volume from a cloned snapshot
yesterday, however something went wrong during the process &
I'm now stuck with the new volume being created on the
server I ran the commands on (s0), but not on the rest of
the peers. I'm unable to delete this new volume from the
server, as it doesn't exist on the peers.
What do I do?
Any insights into what may have gone wrong?
CentOS 7.3.1611
Gluster 3.8.8
The command history & extract from
etc-glusterfs-glusterd.vol.log are included below.
gluster volume list
gluster snapshot list
gluster snapshot clone data-teste
data-bck_GMT-2017.02.09-14.15.43
gluster volume status data-teste
gluster volume delete data-teste
gluster snapshot create teste data
gluster snapshot clone data-teste teste_GMT-2017.02.15-12.44.04
gluster snapshot status
gluster snapshot activate teste_GMT-2017.02.15-12.44.04
gluster snapshot clone data-teste teste_GMT-2017.02.15-12.44.04
[2017-02-15 12:43:21.667403] I [MSGID: 106499]
[glusterd-handler.c:4349:__glusterd_handle_status_volume]
0-management: Received status volume req for volume data-teste
[2017-02-15 12:43:21.682530] E [MSGID: 106301]
[glusterd-syncop.c:1297:gd_stage_op_phase] 0-management:
Staging of operation 'Volume Status' failed on localhost :
Volume data-teste is not started
[2017-02-15 12:43:43.633031] I [MSGID: 106495]
[glusterd-handler.c:3128:__glusterd_handle_getwd]
0-glusterd: Received getwd req
[2017-02-15 12:43:43.640597] I [run.c:191:runner_log]
(-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0xcc4b2)
[0x7ffb396a14b2]
-->/usr/lib64/glusterfs/3.8.8/xlator/mgmt/glusterd.so(+0xcbf65)
[0x7ffb396a0f65]
-->/lib64/libglusterfs.so.0(runner_log+0x115)
[0x7ffb44ec31c5] ) 0-management: Ran script:
/var/lib/glusterd/hooks/1/delete/post/S57glusterfind-delete-post
--volname=data-teste
[2017-02-15 13:05:20.103423] E [MSGID: 106122]
[glusterd-snapshot.c:2397:glusterd_snapshot_clone_prevalidate]
0-management: Failed to pre validate
[2017-02-15 13:05:20.103464] E [MSGID: 106443]
[glusterd-snapshot.c:2413:glusterd_snapshot_clone_prevalidate]
0-management: One or more bricks are not running. Please run
snapshot status command to see brick status.
Please start the stopped brick and then issue snapshot clone
command
[2017-02-15 13:05:20.103481] W [MSGID: 106443]
[glusterd-snapshot.c:8563:glusterd_snapshot_prevalidate]
0-management: Snapshot clone pre-validation failed
[2017-02-15 13:05:20.103492] W [MSGID: 106122]
[glusterd-mgmt.c:167:gd_mgmt_v3_pre_validate_fn]
0-management: Snapshot Prevalidate Failed
[2017-02-15 13:05:20.103503] E [MSGID: 106122]
[glusterd-mgmt.c:884:glusterd_mgmt_v3_pre_validate]
0-management: Pre Validation failed for operation Snapshot
on local node
[2017-02-15 13:05:20.103514] E [MSGID: 106122]
[glusterd-mgmt.c:2243:glusterd_mgmt_v3_initiate_snap_phases]
0-management: Pre Validation Failed
[2017-02-15 13:05:20.103531] E [MSGID: 106027]
[glusterd-snapshot.c:8118:glusterd_snapshot_clone_postvalidate]
0-management: unable to find clone data-teste volinfo
[2017-02-15 13:05:20.103542] W [MSGID: 106444]
[glusterd-snapshot.c:9063:glusterd_snapshot_postvalidate]
0-management: Snapshot create post-validation failed
[2017-02-15 13:05:20.103561] W [MSGID: 106121]
[glusterd-mgmt.c:351:gd_mgmt_v3_post_validate_fn]
0-management: postvalidate operation failed
[2017-02-15 13:05:20.103572] E [MSGID: 106121]
[glusterd-mgmt.c:1660:glusterd_mgmt_v3_post_validate]
0-management: Post Validation failed for operation Snapshot
on local node
[2017-02-15 13:05:20.103582] E [MSGID: 106122]
[glusterd-mgmt.c:2363:glusterd_mgmt_v3_initiate_snap_phases]
0-management: Post Validation Failed
[2017-02-15 13:11:15.862858] W [MSGID: 106057]
[glusterd-snapshot-utils.c:410:glusterd_snap_volinfo_find]
0-management: Snap volume
c3ceae3889484e96ab8bed69593cf6d3.s0.run-gluster-snaps-c3ceae3889484e96ab8bed69593cf6d3-brick1-data-brick
not found [Argumento inválido]
[2017-02-15 13:11:16.314759] I [MSGID: 106143]
[glusterd-pmap.c:250:pmap_registry_bind] 0-pmap: adding
brick
/run/gluster/snaps/c3ceae3889484e96ab8bed69593cf6d3/brick1/data/brick
on port 49452
[2017-02-15 13:11:16.316090] I
[rpc-clnt.c:1046:rpc_clnt_connection_init] 0-management:
setting frame-timeout to 600
[2017-02-15 13:11:16.348867] W [MSGID: 106057]
[glusterd-snapshot-utils.c:410:glusterd_snap_volinfo_find]
0-management: Snap volume
c3ceae3889484e96ab8bed69593cf6d3.s0.run-gluster-snaps-c3ceae3889484e96ab8bed69593cf6d3-brick6-data-arbiter
not found [Argumento inválido]
[2017-02-15 13:11:16.558878] I [MSGID: 106143]
[glusterd-pmap.c:250:pmap_registry_bind] 0-pmap: adding
brick
/run/gluster/snaps/c3ceae3889484e96ab8bed69593cf6d3/brick6/data/arbiter
on port 49453
[2017-02-15 13:11:16.559883] I
[rpc-clnt.c:1046:rpc_clnt_connection_init] 0-management:
setting frame-timeout to 600
[2017-02-15 13:11:23.279721] E [MSGID: 106030]
[glusterd-snapshot.c:4736:glusterd_take_lvm_snapshot]
0-management: taking snapshot of the brick
(/run/gluster/snaps/c3ceae3889484e96ab8bed69593cf6d3/brick1/data/brick)
of device
/dev/mapper/v0.dc0.cte--g0-c3ceae3889484e96ab8bed69593cf6d3_0 failed
[2017-02-15 13:11:23.279790] E [MSGID: 106030]
[glusterd-snapshot.c:5135:glusterd_take_brick_snapshot]
0-management: Failed to take snapshot of brick
s0:/run/gluster/snaps/c3ceae3889484e96ab8bed69593cf6d3/brick1/data/brick
[2017-02-15 13:11:23.279806] E [MSGID: 106030]
[glusterd-snapshot.c:6484:glusterd_take_brick_snapshot_task]
0-management: Failed to take backend snapshot for brick
s0:/run/gluster/snaps/data-teste/brick1/data/brick
volume(data-teste)
[2017-02-15 13:11:23.286678] E [MSGID: 106030]
[glusterd-snapshot.c:4736:glusterd_take_lvm_snapshot]
0-management: taking snapshot of the brick
(/run/gluster/snaps/c3ceae3889484e96ab8bed69593cf6d3/brick6/data/arbiter)
of device
/dev/mapper/v0.dc0.cte--g0-c3ceae3889484e96ab8bed69593cf6d3_1 failed
[2017-02-15 13:11:23.286735] E [MSGID: 106030]
[glusterd-snapshot.c:5135:glusterd_take_brick_snapshot]
0-management: Failed to take snapshot of brick
s0:/run/gluster/snaps/c3ceae3889484e96ab8bed69593cf6d3/brick6/data/arbiter
[2017-02-15 13:11:23.286749] E [MSGID: 106030]
[glusterd-snapshot.c:6484:glusterd_take_brick_snapshot_task]
0-management: Failed to take backend snapshot for brick
s0:/run/gluster/snaps/data-teste/brick6/data/arbiter
volume(data-teste)
[2017-02-15 13:11:23.286793] E [MSGID: 106030]
[glusterd-snapshot.c:6626:glusterd_schedule_brick_snapshot]
0-management: Failed to create snapshot
[2017-02-15 13:11:23.286813] E [MSGID: 106441]
[glusterd-snapshot.c:6796:glusterd_snapshot_clone_commit]
0-management: Failed to take backend snapshot data-teste
[2017-02-15 13:11:25.530666] E [MSGID: 106442]
[glusterd-snapshot.c:8308:glusterd_snapshot] 0-management:
Failed to clone snapshot
[2017-02-15 13:11:25.530721] W [MSGID: 106123]
[glusterd-mgmt.c:272:gd_mgmt_v3_commit_fn] 0-management:
Snapshot Commit Failed
[2017-02-15 13:11:25.530735] E [MSGID: 106123]
[glusterd-mgmt.c:1427:glusterd_mgmt_v3_commit] 0-management:
Commit failed for operation Snapshot on local node
[2017-02-15 13:11:25.530749] E [MSGID: 106123]
[glusterd-mgmt.c:2304:glusterd_mgmt_v3_initiate_snap_phases]
0-management: Commit Op Failed
[2017-02-15 13:11:25.532312] E [MSGID: 106027]
[glusterd-snapshot.c:8118:glusterd_snapshot_clone_postvalidate]
0-management: unable to find clone data-teste volinfo
[2017-02-15 13:11:25.532339] W [MSGID: 106444]
[glusterd-snapshot.c:9063:glusterd_snapshot_postvalidate]
0-management: Snapshot create post-validation failed
[2017-02-15 13:11:25.532353] W [MSGID: 106121]
[glusterd-mgmt.c:351:gd_mgmt_v3_post_validate_fn]
0-management: postvalidate operation failed
[2017-02-15 13:11:25.532367] E [MSGID: 106121]
[glusterd-mgmt.c:1660:glusterd_mgmt_v3_post_validate]
0-management: Post Validation failed for operation Snapshot
on local node
[2017-02-15 13:11:25.532381] E [MSGID: 106122]
[glusterd-mgmt.c:2363:glusterd_mgmt_v3_initiate_snap_phases]
0-management: Post Validation Failed
[2017-02-15 13:29:53.779020] E [MSGID: 106062]
[glusterd-snapshot-utils.c:2391:glusterd_snap_create_use_rsp_dict]
0-management: failed to get snap UUID
[2017-02-15 13:29:53.779073] E [MSGID: 106099]
[glusterd-snapshot-utils.c:2507:glusterd_snap_use_rsp_dict]
0-glusterd: Unable to use rsp dict
[2017-02-15 13:29:53.779096] E [MSGID: 106108]
[glusterd-mgmt.c:1305:gd_mgmt_v3_commit_cbk_fn]
0-management: Failed to aggregate response from node/brick
[2017-02-15 13:29:53.779136] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Commit failed on s3. Please check log file for
details.
[2017-02-15 13:29:54.136196] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Commit failed on s1. Please check log file for
details.
The message "E [MSGID: 106108]
[glusterd-mgmt.c:1305:gd_mgmt_v3_commit_cbk_fn]
0-management: Failed to aggregate response from node/brick"
repeated 2 times between [2017-02-15 13:29:53.779096] and
[2017-02-15 13:29:54.535080]
[2017-02-15 13:29:54.535098] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Commit failed on s2. Please check log file for
details.
[2017-02-15 13:29:54.535320] E [MSGID: 106123]
[glusterd-mgmt.c:1490:glusterd_mgmt_v3_commit] 0-management:
Commit failed on peers
[2017-02-15 13:29:54.535370] E [MSGID: 106123]
[glusterd-mgmt.c:2304:glusterd_mgmt_v3_initiate_snap_phases]
0-management: Commit Op Failed
[2017-02-15 13:29:54.539708] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Post Validation failed on s1. Please check log
file for details.
[2017-02-15 13:29:54.539797] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Post Validation failed on s3. Please check log
file for details.
[2017-02-15 13:29:54.539856] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Post Validation failed on s2. Please check log
file for details.
[2017-02-15 13:29:54.540224] E [MSGID: 106121]
[glusterd-mgmt.c:1713:glusterd_mgmt_v3_post_validate]
0-management: Post Validation failed on peers
[2017-02-15 13:29:54.540256] E [MSGID: 106122]
[glusterd-mgmt.c:2363:glusterd_mgmt_v3_initiate_snap_phases]
0-management: Post Validation Failed
The message "E [MSGID: 106062]
[glusterd-snapshot-utils.c:2391:glusterd_snap_create_use_rsp_dict]
0-management: failed to get snap UUID" repeated 2 times
between [2017-02-15 13:29:53.779020] and [2017-02-15
13:29:54.535075]
The message "E [MSGID: 106099]
[glusterd-snapshot-utils.c:2507:glusterd_snap_use_rsp_dict]
0-glusterd: Unable to use rsp dict" repeated 2 times between
[2017-02-15 13:29:53.779073] and [2017-02-15 13:29:54.535078]
[2017-02-15 13:31:14.285666] I [MSGID: 106488]
[glusterd-handler.c:1537:__glusterd_handle_cli_get_volume]
0-management: Received get vol req
[2017-02-15 13:32:17.827422] E [MSGID: 106027]
[glusterd-handler.c:4670:glusterd_get_volume_opts]
0-management: Volume cluster.locking-scheme does not exist
[2017-02-15 13:34:02.635762] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Pre Validation failed on s1. Volume data-teste
does not exist
[2017-02-15 13:34:02.635838] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Pre Validation failed on s2. Volume data-teste
does not exist
[2017-02-15 13:34:02.635889] E [MSGID: 106116]
[glusterd-mgmt.c:135:gd_mgmt_v3_collate_errors]
0-management: Pre Validation failed on s3. Volume data-teste
does not exist
[2017-02-15 13:34:02.636092] E [MSGID: 106122]
[glusterd-mgmt.c:947:glusterd_mgmt_v3_pre_validate]
0-management: Pre Validation failed on peers
[2017-02-15 13:34:02.636132] E [MSGID: 106122]
[glusterd-mgmt.c:2009:glusterd_mgmt_v3_initiate_all_phases]
0-management: Pre Validation Failed
[2017-02-15 13:34:20.313228] E [MSGID: 106153]
[glusterd-syncop.c:113:gd_collate_errors] 0-glusterd:
Staging failed on s2. Error: Volume data-teste does not exist
[2017-02-15 13:34:20.313320] E [MSGID: 106153]
[glusterd-syncop.c:113:gd_collate_errors] 0-glusterd:
Staging failed on s1. Error: Volume data-teste does not exist
[2017-02-15 13:34:20.313377] E [MSGID: 106153]
[glusterd-syncop.c:113:gd_collate_errors] 0-glusterd:
Staging failed on s3. Error: Volume data-teste does not exist
[2017-02-15 13:34:36.796455] E [MSGID: 106153]
[glusterd-syncop.c:113:gd_collate_errors] 0-glusterd:
Staging failed on s1. Error: Volume data-teste does not exist
[2017-02-15 13:34:36.796830] E [MSGID: 106153]
[glusterd-syncop.c:113:gd_collate_errors] 0-glusterd:
Staging failed on s3. Error: Volume data-teste does not exist
[2017-02-15 13:34:36.796896] E [MSGID: 106153]
[glusterd-syncop.c:113:gd_collate_errors] 0-glusterd:
Staging failed on s2. Error: Volume data-teste does not exist
Many thanks!
D
_______________________________________________
Gluster-users mailing list
[email protected] <mailto:[email protected]>
http://lists.gluster.org/mailman/listinfo/gluster-users
<http://lists.gluster.org/mailman/listinfo/gluster-users>
_______________________________________________
Gluster-users mailing list
[email protected]
http://lists.gluster.org/mailman/listinfo/gluster-users
