On 06/12/2017 08:10 PM, [email protected] wrote:
When using nfs-ganesha with GlusterFS, is it necessary to enable it with the
following command?
# gluster nfs-ganesha enable
It is said that it is necessary to enable nfs-ganesha option when setting
ganesha.enable on for volume.
It is said that setting of ganesha-ha.conf is necessary, but is it necessary to
set up HA to use nfs-ganesha?
I would be pleased if you could tell me about HA setting example if possible.
Please wait .. This will take a few minutes to complete.
nfs-ganesha: failed: Failed to set up HA config for NFS - Ganesha. Please check
the log file for details
By the way, if you start up nfs - ganesha service without doing the above and
do export setting,
NFS connection is possible, but is not this an official connection method?
You may use nfs-ganesha+glusterfs without HA. You need to disable
legacy gluster NFS (gnfs).
The "walk" part of my article at
http://blog.gluster.org/2015/10/linux-scale-out-nfsv4-using-nfs-ganesha-and-glusterfs-one-step-at-a-time
shows how to do this.
--
Kaleb
_______________________________________________
Gluster-users mailing list
[email protected]
http://lists.gluster.org/mailman/listinfo/gluster-users
