On Thu, Jul 6, 2017 at 6:55 AM, Atin Mukherjee <[email protected]> wrote:
> > >> > You can switch back to info mode the moment this is hit one more time with > the debug log enabled. What I'd need here is the glusterd log (with debug > mode) to figure out the exact cause of the failure. > > >> >> Let me know, >> thanks >> >> > Yes, but with the volume in the current state I cannot run the reset-brick command. I have another volume, named "iso", that I can use, but I would like to use it as clean after understanding the problem on "export" volume. Currently on "export" volume in fact I have this [root@ovirt01 ~]# gluster volume info export Volume Name: export Type: Replicate Volume ID: b00e5839-becb-47e7-844f-6ce6ce1b7153 Status: Started Snapshot Count: 0 Number of Bricks: 0 x (2 + 1) = 1 Transport-type: tcp Bricks: Brick1: gl01.localdomain.local:/gluster/brick3/export Options Reconfigured: ... While on the other two nodes [root@ovirt02 ~]# gluster volume info export Volume Name: export Type: Replicate Volume ID: b00e5839-becb-47e7-844f-6ce6ce1b7153 Status: Started Snapshot Count: 0 Number of Bricks: 0 x (2 + 1) = 2 Transport-type: tcp Bricks: Brick1: ovirt02.localdomain.local:/gluster/brick3/export Brick2: ovirt03.localdomain.local:/gluster/brick3/export Options Reconfigured: [root@ovirt03 ~]# gluster volume info export Volume Name: export Type: Replicate Volume ID: b00e5839-becb-47e7-844f-6ce6ce1b7153 Status: Started Snapshot Count: 0 Number of Bricks: 0 x (2 + 1) = 2 Transport-type: tcp Bricks: Brick1: ovirt02.localdomain.local:/gluster/brick3/export Brick2: ovirt03.localdomain.local:/gluster/brick3/export Options Reconfigured: ... Eventually I can destroy and recreate this "export" volume again with the old names (ovirt0N.localdomain.local) if you give me the sequence of commands, then enable debug and retry the reset-brick command Gianluca
_______________________________________________ Gluster-users mailing list [email protected] http://lists.gluster.org/mailman/listinfo/gluster-users
