Thank you very much Sanoj, I ran your script once and it worked. I now have
quotas again...
Question: do you know in which release this issue will be fixed?
> -------- Original Message --------
> Subject: Re: [Gluster-users] Quotas not working after adding arbiter brick to
> replica 2
> Local Time: August 4, 2017 3:28 PM
> UTC Time: August 4, 2017 1:28 PM
> From: [email protected]
> To: mabi <[email protected]>
> Gluster Users <[email protected]>
>
> Hi mabi,
> This is a likely issue where the last gfid entry in the quota.conf file is
> stale (because the directory was deleted with quota limit on it being removed)
> (https://review.gluster.org/#/c/16507/)
> To fix the issue, we need to remove the last entry (last 17 bytes/ 16bytes
> based on quota version) in the file.
> Please use the below work around for the same until next upgrade.
> you only need to change $vol to the name of volume.
> ===============================
>
> vol=<v5>
> qconf=/var/lib/glusterd/vols/$vol/quota.conf
> qconf_bk="$qconf".bk
> cp $qconf $qconf_bk
> grep "GlusterFS Quota conf | version: v1.2"
> /var/lib/glusterd/vols/v5/quota.conf
> if [ $? -eq 0 ];
> then
> entry_size=17;
> else
> entry_size=16;
> fi
> size=`ls -l $qconf | awk '{print $5}'`
> (( size_new = size - entry_size ))
> dd if=$qconf_bk of=$qconf bs=1 count=$size_new
> gluster v quota v5 list
> ====================================
> In the unlikely case that there are multiple stale entries in the end of file
> you may have to run it multiple times
> to fix the issue (each time one stale entry at the end is removed)
>
> On Thu, Aug 3, 2017 at 1:17 PM, mabi <[email protected]> wrote:
>
>> I tried to re-create manually my quotas but not even that works now. Running
>> the "limit-usage" command as showed below returns success:
>> $ sudo gluster volume quota myvolume limit-usage /userdirectory 50GB
>> volume quota : success
>> but when I list the quotas using "list" nothing appears.
>> What can I do to fix that issue with the quotas?
>>
>>> -------- Original Message --------
>>> Subject: Re: [Gluster-users] Quotas not working after adding arbiter brick
>>> to replica 2
>>>
>>> Local Time: August 2, 2017 2:35 PM
>>> UTC Time: August 2, 2017 12:35 PM
>>> From: [email protected]
>>> To: Sanoj Unnikrishnan <[email protected]>
>>> Gluster Users <[email protected]>
>>> Hi Sanoj,
>>> I copied over the quota.conf file from the affected volume (node 1) and
>>> opened it up with a hex editor but can not recognize anything really except
>>> for the first few header/version bytes. I have attached it within this mail
>>> (compressed with bzip2) as requested.
>>> Should I recreate them manually? there where around 10 of them. Or is there
>>> a hope of recovering these quotas?
>>> Regards,
>>> M.
>>>
>>>> -------- Original Message --------
>>>> Subject: Re: [Gluster-users] Quotas not working after adding arbiter brick
>>>> to replica 2
>>>> Local Time: August 2, 2017 1:06 PM
>>>> UTC Time: August 2, 2017 11:06 AM
>>>> From: [email protected]
>>>> To: mabi <[email protected]>
>>>> Gluster Users <[email protected]>
>>>>
>>>> Mabi,
>>>> We have fixed a couple of issues in the quota list path.
>>>> Could you also please attach the quota.conf file
>>>> (/var/lib/glusterd/vols/patchy/quota.conf)
>>>> (Ideally, the first few bytes would be ascii characters followed by 17
>>>> bytes per directory on which quota limit is set)
>>>> Regards,
>>>> Sanoj
>>>>
>>>> On Tue, Aug 1, 2017 at 1:36 PM, mabi <[email protected]> wrote:
>>>>
>>>>> I also just noticed quite a few of the following warning messages in the
>>>>> quotad.log log file:
>>>>> [2017-08-01 07:59:27.834202] W [MSGID: 108027]
>>>>> [afr-common.c:2496:afr_discover_done] 0-myvolume-replicate-0: no read
>>>>> subvols for (null)
>>>>>
>>>>>> -------- Original Message --------
>>>>>> Subject: [Gluster-users] Quotas not working after adding arbiter brick
>>>>>> to replica 2
>>>>>> Local Time: August 1, 2017 8:49 AM
>>>>>> UTC Time: August 1, 2017 6:49 AM
>>>>>> From: [email protected]
>>>>>> To: Gluster Users <[email protected]>
>>>>>> Hello,
>>>>>> As you might have read in my previous post on the mailing list I have
>>>>>> added an arbiter node to my GlusterFS 3.8.11 replica 2 volume. After
>>>>>> some healing issues and help of Ravi that could get fixed but now I just
>>>>>> noticed that my quotas are all gone.
>>>>>> When I run the following command:
>>>>>> glusterfs volume quota myvolume list
>>>>>> There is no output...
>>>>>> In the /var/log/glusterfs/quotad.log I can see the following two lines
>>>>>> when running the list command:
>>>>>> [2017-08-01 06:46:04.451765] W [dict.c:581:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7fe868e21f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x2d82)
>>>>>> [0x7fe868e22d82]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7fe86f5c2b10] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> [2017-08-01 06:46:04.459154] W [dict.c:581:dict_unref]
>>>>>> (-->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x1f3d)
>>>>>> [0x7fe868e21f3d]
>>>>>> -->/usr/lib/x86_64-linux-gnu/glusterfs/3.8.11/xlator/features/quotad.so(+0x2d82)
>>>>>> [0x7fe868e22d82]
>>>>>> -->/usr/lib/x86_64-linux-gnu/libglusterfs.so.0(dict_unref+0xc0)
>>>>>> [0x7fe86f5c2b10] ) 0-dict: dict is NULL [Invalid argument]
>>>>>> In case you need this info, I have added by arbiter node to the replica
>>>>>> 2 by using this command:
>>>>>> gluster volume add-brick myvolume replica 3 arbiter 1
>>>>>> arbiternode.domain.tld:/srv/glusterfs/myvolume/brick
>>>>>> How can I get my quotas back working as before? I had defined around 20
>>>>>> quotas on different directories of that volume.
>>>>>> Regards,
>>>>>> Mabi
>>>>> _______________________________________________
>>>>> Gluster-users mailing list
>>>>> [email protected]
>>>>> http://lists.gluster.org/mailman/listinfo/gluster-users_______________________________________________
Gluster-users mailing list
[email protected]
http://lists.gluster.org/mailman/listinfo/gluster-users
