On 09/12/2017 08:20 AM, Alessandro De Salvo wrote:
Hi,
I'm planning to upgrade to gluster 3.12, so I tried on a dev cluster the new
release, but I was surprised the Ganesha support is someway incomplete, at
least from the documentation point of view.
The installation of glusterfs was successful, and it also works with my ovirt
facility. However I cannot easily upload to the ISO domain without the nfs
support.
It seems that in 3.12 (and probably 3.11, which I did not try) the nfs ganesha support is
no more included in gluster but delegated to a new component, storhaug. There is very
minimal documentation on how to setup storhaug available, if not totally absent. The
GitHub page in fact is totally useless, and I found no mention of it in the gluster
documentation, everything still points to the old method. At the same time the li
commands to export the volumes like "gluster nfs-ganesha enable" and the
corresponding vol set for the exports do not work anymore.
Is there any documentation available or does it mean that 3.12 cannot be
exported via nfs? That would be a serious missing feature and a real step back
for production facilities.
These are good points.
It is possible to use nfs-ganesha with 3.12 without the HA and
integrated support. There's a copy of my blog at [1]. It's a bit dated
but still useful.
Or you can stay on 3.10 if you really want the integrated support and
upgrade to 3.12 later, when storhaug is finally ready.
[1] http://aws-labs.com/linux-scale-nfsv4-nfs-ganesha-glusterfs/
--
Kaleb
_______________________________________________
Gluster-users mailing list
[email protected]
http://lists.gluster.org/mailman/listinfo/gluster-users
