On Fri, Feb 9, 2018 at 3:23 PM, Seva Gluschenko <g...@webkontrol.ru> wrote:
> Hi Karthik, > > Thank you for your reply. The heal is still undergoing, as the > /var/log/glusterfs/glustershd.log keeps growing, and there's a lot of > pending entries in the heal info. > > The gluster version is 3.10.9 and 3.10.10 (the version update in > progress). It doesn't have info summary [yet?], and the heal info is way > too long to attach here. (It takes more than 20 minutes just to collect it, > but the truth is, the cluster is quite heavily loaded, it handles roughly 8 > million reads and 100k writes daily.) > Since you have huge number of files inside nested directories and high load on the cluster, it might take some time to complete the heal. You don't need to worry about the gfids you are seeing on the heal info output. Heal info summary is supported from version 3.13. > > The heal info output is full of lines like this: > > ... > > Brick gv2:/data/glusterfs > <gfid:96a4ee35-b519-40e2-8dc0-a26f8faa5628> > <gfid:fa4185b0-e5ab-4fdc-9dca-cb6ba33dcc8d> > <gfid:8b2cf4bf-8c2a-465e-8f28-3e9a7f517268> > <gfid:13925c48-fda4-40bd-bfcb-d7ced99b82b2> > <gfid:292e3a0e-7114-4c97-b688-e94503047b58> > <gfid:a52d1173-e034-4b57-9170-a7c91cbe2904> > <gfid:5c830c7b-97b7-425b-9ab2-761ef2f41e88> > <gfid:420c76a8-1598-4136-9c77-88c8d59d24e7> > <gfid:ea6dbca2-f7e3-4015-ae34-04e8bf31fd4f> > ... > > And so forth. Out of 80k+ lines, less than just 200 are not related to > gfids (and yes, number of gfids is well beyond 64999): > > # grep -c gfid heal-info.fpack > 80578 > > # grep -v gfid heal-info.myvol > Brick gv0:/data/glusterfs > Status: Connected > Number of entries: 0 > > Brick gv1:/data/glusterfs > Status: Connected > Number of entries: 0 > > Brick gv4:/data/gv01-arbiter > Status: Connected > Number of entries: 0 > > Brick gv2:/data/glusterfs > /testset/13f/13f27c303b3cb5e23ee647d8285a4a6d.pack > /testset/05c - Possibly undergoing heal > > /testset/b99 - Possibly undergoing heal > > /testset/dd7 - Possibly undergoing heal > > /testset/0b8 - Possibly undergoing heal > > /testset/f21 - Possibly undergoing heal > > ... > > And here is the getfattr output for a sample file: > > # getfattr -d -e hex -m . /data/glusterfs/testset/13f/ > 13f27c303b3cb5e23ee647d8285a4a6d.pack > getfattr: Removing leading '/' from absolute path names > # file: data/glusterfs/testset/13f/13f27c303b3cb5e23ee647d8285a4a6d.pack > trusted.afr.dirty=0x000000000000000000000000 > trusted.afr.myvol-client-6=0x000000010000000000000000 > trusted.bit-rot.version=0x02000000000000005a0d2f650005bf97 > trusted.gfid=0xb42d966b77154de990ecd092201714fd > > I tried several files, and the output is pretty much the same, the gfid is > the only difference. > > Could it be anything else I would provide to shed some light on this? > I wanted to check the getfattr output of a file and a directory which belongs to the second replica sub volume from all the 3 bricks Brick4: gv2:/data/glusterfs Brick5: gv3:/data/glusterfs Brick6: gv1:/data/gv23-arbiter (arbiter) to see the direction of pending markers being set. Regards, Karthik > > -- > Best Regards, > > Seva Gluschenko > CTO @ http://webkontrol.ru > > > February 9, 2018 9:16 AM, "Karthik Subrahmanya" <ksubr...@redhat.com > <%22karthik%20subrahmanya%22%20%3cksubr...@redhat.com%3E>> wrote: > > Hey, > Did the heal completed and you still have some entries pending heal? > If yes then can you provide the following informations to debug the issue. > 1. Which version of gluster you are running > 2. gluster volume heal <volname> info summary or gluster volume heal > <volname> info > 3. getfattr -d -e hex -m . <filepath-on-brick> output of any one of the > which is pending heal from all the bricks > Regards, > Karthik > On Thu, Feb 8, 2018 at 12:48 PM, Seva Gluschenko <g...@webkontrol.ru> > wrote: > > Hi folks, > > I'm troubled moving an arbiter brick to another server because of I/O load > issues. My setup is as follows: > > # gluster volume info > > Volume Name: myvol > Type: Distributed-Replicate > Volume ID: 43ba517a-ac09-461e-99da-a197759a7dc8 > Status: Started > Snapshot Count: 0 > Number of Bricks: 3 x (2 + 1) = 9 > Transport-type: tcp > Bricks: > Brick1: gv0:/data/glusterfs > Brick2: gv1:/data/glusterfs > Brick3: gv4:/data/gv01-arbiter (arbiter) > Brick4: gv2:/data/glusterfs > Brick5: gv3:/data/glusterfs > Brick6: gv1:/data/gv23-arbiter (arbiter) > Brick7: gv4:/data/glusterfs > Brick8: gv5:/data/glusterfs > Brick9: pluto:/var/gv45-arbiter (arbiter) > Options Reconfigured: > nfs.disable: on > transport.address-family: inet > storage.owner-gid: 1000 > storage.owner-uid: 1000 > cluster.self-heal-daemon: enable > > The gv23-arbiter is the brick that was recently moved from other server > (chronos) using the following command: > > # gluster volume replace-brick myvol chronos:/mnt/gv23-arbiter > gv1:/data/gv23-arbiter commit force > volume replace-brick: success: replace-brick commit force operation > successful > > It's not the first time I was moving an arbiter brick, and the heal-count > was zero for all the bricks before the change, so I didn't expect much > trouble then. What was probably wrong is that I then forced chronos out of > cluster with gluster peer detach command. All since that, over the course > of the last 3 days, I see this: > > # gluster volume heal myvol statistics heal-count > Gathering count of entries to be healed on volume myvol has been successful > > Brick gv0:/data/glusterfs > Number of entries: 0 > > Brick gv1:/data/glusterfs > Number of entries: 0 > > Brick gv4:/data/gv01-arbiter > Number of entries: 0 > > Brick gv2:/data/glusterfs > Number of entries: 64999 > > Brick gv3:/data/glusterfs > Number of entries: 64999 > > Brick gv1:/data/gv23-arbiter > Number of entries: 0 > > Brick gv4:/data/glusterfs > Number of entries: 0 > > Brick gv5:/data/glusterfs > Number of entries: 0 > > Brick pluto:/var/gv45-arbiter > Number of entries: 0 > > According to the /var/log/glusterfs/glustershd.log, the self-healing is > undergoing, so it might be worth just sit and wait, but I'm wondering why > this 64999 heal-count persists (a limitation on counter? In fact, gv2 and > gv3 bricks contain roughly 30 million files), and I feel bothered because > of the following output: > > # gluster volume heal myvol info heal-failed > Gathering list of heal failed entries on volume myvol has been > unsuccessful on bricks that are down. Please check if all brick processes > are running. > > I attached the chronos server back to the cluster, with no noticeable > effect. Any comments and suggestions would be much appreciated. > > -- > Best Regards, > > Seva Gluschenko > CTO @ http://webkontrol.ru > > _______________________________________________ > Gluster-users mailing list > Gluster-users@gluster.org > http://lists.gluster.org/mailman/listinfo/gluster-users > >
_______________________________________________ Gluster-users mailing list Gluster-users@gluster.org http://lists.gluster.org/mailman/listinfo/gluster-users
