Dear Gluster-Users,
I am experiencing RDMA problems.
I have installed Ubuntu 16.04.4 running with 4.15.0-13-generic kernel,
MLNX_OFED_LINUX-4.3-1.0.1.0-ubuntu16.04-x86_64 to 4 different servers.
All of them has Mellanox ConnectX-4 LX dual port NICs. These four
servers are connected via Mellanox SN2100 Switch.
I have installed GlusterFS Server v3.10 (from Ubuntu PPA) to 3 servers.
These 3 boxes are running as gluster cluster. Additionally, I have
installed Glusterfs Client to the last one.
I have created Gluster Volume with this command:
# gluster volume create db transport rdma replica 3 arbiter 1
gluster1:/storage/db/ gluster2:/storage/db/ cinder:/storage/db force
(network.ping-timeout is 3)
Then I have mounted this volume using mount command below.
mount -t glusterfs -o transport=rdma gluster1:/db /db
After mountings "/db", I can access the files.
The problem is, when I reboot one of the cluster nodes, fuse client
gives this error below and hangs.
[2018-04-17 07:42:55.506422] W [MSGID: 103070]
[rdma.c:4284:gf_rdma_handle_failed_send_completion]
0-rpc-transport/rdma: *send work request on `mlx5_0' returned error
wc.status = 5, wc.vendor_err = 245, post->buf = 0x7f8b92016000,
wc.byte_len = 0, post->reused = 135*
When I change transport mode from rdma to tcp, fuse client works well.
No hangs.
I also tried Gluster 3.8, 3.10, 4.0.0 and 4.0.1 (from Ubuntu PPAs) on
Ubuntu 16.04.4 and Centos 7.4. But results were the same.
Thank you.
Necati.
_______________________________________________
Gluster-users mailing list
Gluster-users@gluster.org
http://lists.gluster.org/mailman/listinfo/gluster-users
