Thank you, Ashish. Yes, you are right, I’m using the 3.12.14 release. I’ll try to disable eager-lock option and I’ll check if it solves the issue.
Regards, Mauro > Il giorno 26 ott 2018, alle ore 08:35, Ashish Pandey <[email protected]> ha > scritto: > > > I think you are using an old version, release-3.12 which does not have his > option. > This option is present in release-3.13, so you have to upgrade your gluster . > > If you want to try with the current version then you have to disable > eager-lock option > gluster v set <volname> disperse.eager-lock off > > This will solve the issue but will impact performance of data operation on > files. > Give it a try and see if it works and if that is the real problem. > > --- > Ashish > > From: "Mauro Tridici" <[email protected]> > To: "Ashish Pandey" <[email protected]> > Cc: "gluster-users" <[email protected]> > Sent: Thursday, October 25, 2018 1:28:28 PM > Subject: Re: [Gluster-users] Gluster 3.12.14: slow ls -l command + "Another > transaction is in progress. Please try again after sometime" message > > > Hi Ashish, > > "gluster v get tier2 all | grep other” command returned empty output. > > In attachment you can find the output of “gluster v get tier2 all” command. > > Thank you very much, > Mauro > > > > > Il giorno 25 ott 2018, alle ore 09:11, Ashish Pandey <[email protected] > <mailto:[email protected]>> ha scritto: > > > Hi, > > Slow "ls -l" command which is also the reason behind TAB and df -h issue. > I would suggest to check "disperse.other-eager-lock" option and see if it is > "ON" or "OFF" > > gluster v get <volname> all | grep other > > If it is ON, change it to OFF by following command > gluster v set <volname> disperse.other-eager-lock off > > It should solve the problem. > > --- > Ashish > > > > > From: "Mauro Tridici" <[email protected] <mailto:[email protected]>> > To: "gluster-users" <[email protected] > <mailto:[email protected]>> > Sent: Wednesday, October 24, 2018 8:20:48 PM > Subject: [Gluster-users] Gluster 3.12.14: slow ls -l command + "Another > transaction is in progress. Please try again after sometime" message > > Dear All, > > during last two days, our distributed dispersed gluster volume is showing > some strange behaviors: > > 1) "df -h" and "ls -l" linux commands are very slow > 2) “TAB” key usage causes the hang of the shell > 3) nagios monitoring system is showing some alerts related to QUOTA and > VOLUME UTILIZATION similar to the following one: > > Notification Type: PROBLEM > > Service: Volume Quota - tier2 > Host: tier2-gluster > Address: tier2-gluster > State: WARNING > > Date/Time: Wed Oct 24 16:27:13 CEST 2018 > > Additional Info: > > QUOTA: Quota status could not be determined. > > 4) on some gluster servers, “df -h” command shows a new mount > “/run/gluster/tier2_quota_list” > 5) gluster vol status returns this message: “Another transaction is in > progress. Please try again after sometime”. > > I just restarted the “glusterd” service on each server, one by one. > Also, I executed “umount -l /run/gluster/tier2_quota_list” on each server. > Now, everything seems to be ok, but I would like to know if there is a way to > avoid this kind of problem. > > Last question: do you think that it is a good practice executing “service > glusterd restart” command on each server when the problem appears? > In attachment you can find the glusterd.log file > > Thank you in advance, > Mauro > > > > > > > > _______________________________________________ > Gluster-users mailing list > [email protected] <mailto:[email protected]> > https://lists.gluster.org/mailman/listinfo/gluster-users > > > > > > _______________________________________________ > Gluster-users mailing list > [email protected] > https://lists.gluster.org/mailman/listinfo/gluster-users >
_______________________________________________ Gluster-users mailing list [email protected] https://lists.gluster.org/mailman/listinfo/gluster-users
