23.02.2019 19:54, Alex K пишет:
Hi all,
I have a replica 3 setup where each server was configured with a dual
interfaces in mode 6 bonding. All cables were connected to one common
network switch.
To add redundancy to the switch, and avoid being a single point of
failure, I connected each second cable of each server to a second
switch. This turned out to not function as gluster was refusing to
start the volume logging "transport endpoint is disconnected" although
all nodes were able to reach each other (ping) in the storage network.
I switched the mode to mode 1 (active/passive) and initially it worked
but following a reboot of all cluster same issue appeared. Gluster is
not starting the volumes.
Isn't active/passive supposed to work like that? Can one have such
redundant network setup or are there any other recommended approaches?
Yes, we use lacp, I guess this is mode 4 ( we use teamd ), it is, no
doubt, best way.
Thanx,
Alex
_______________________________________________
Gluster-users mailing list
[email protected]
https://lists.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
[email protected]
https://lists.gluster.org/mailman/listinfo/gluster-users
